MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Identification of the preparation
Lightscribe Coating V1.2
Hewlett-Packard Company
Manufacturer information
1000 NE Circle Boulevard
Corvallis OR 97330-4239
USA
Hewlett-Packard Health Effects Line
1-800-457-4209
(Toll free within the US)
1-503-494-7199
(Direct)
1 July 2006
Date Prepared
2. COMPOSITION / INFORMATION ON INGREDIENTS
Component % by weight EU Number EU Classification
Acrylate compounds < 50 Not specified Xi; R36/38, R43
Activator < 30 Not specified R52/53
Dye developer < 10 Not specified N; R51-53
Photoinitiator 1 <6 Not specified Xn; R22, R50-53
Photoinitiator 2 <2 Not specified Not classified
Acrylic resin <5 Not specified Xi; R36/38, R43
Substituted benzene <5 Not specified Xi; R36/37/38
Substituted sulfone <5 Not specified Not classified
Not specified
Surfactant <2 Not classified
Antenna dye <2 Not specified Not classified
This product has been evaluated using criteria specified in 29 CFR 1910.1200
Composition
(Hazard Communication Standard. This product is considered hazardous under 29
Comments
CFR 1910.1200 (Hazard Communication).
3. HAZARDS IDENTIFICATION
Emergency Overview WARNING!
MAY CAUSE SEVERE EYE IRRITATION.
MAY CAUSE SKIN IRRITATION OR ALLERGIC
REACTION.
Product is a viscous green liquid, poorly miscible in water.
Product will support combustion and may be ignited by extreme
heat or flame.
Acute Health Effects
Contact with skin may result in moderate to severe irritation. May
Skin Contact
cause skin sensitization, an allergic reaction, which becomes
evident on re-exposure to this material.
Contact with eyes may result in moderate to severe irritation.
Eye Contact
Symptoms include itching, burning, redness, and tearing.
Avoid breathing vapors or mists of this product. Inhalation may
Inhalation
result in respiratory irritation. May cause sensitization by inhalation.
May be harmful if swallowed. Ingestion may cause irritation of
Ingestion
mouth and throat, nausea, vomiting and diarrhea.
Potential Health Effects
Potential routes of exposure under normal use conditions are
Routes of Exposure
skin and eye contact; and inhalation.
Material name: Lightscribe Coating V1.2
Date prepared: 1 July 2006
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Prolonged or repeated skin contact may cause skin irritation or
Chronic Health Effects
allergic skin sensitization reaction.
None of the components present in this formulation at
Carcinogenicity
concentrations equal to or greater than 0.1% are listed by EU,
MAK, IARC, NTP, or OSHA.
4. FIRST AID MEASURES
First Aid Procedures
Do not rub eyes. Immediately flush with large amounts of clean,
Eye
warm water (low pressure) for at least 15 minutes or until particles
are removed. If irritation persists get medical attention.
Remove contaminated clothing. Wash affected areas thoroughly
Skin
with mild soap and water. Get medical attention if irritation develops
or persists.
Move to fresh air. If symptoms persist, get medical attention.
Inhalation
If ingestion of a large amount does occur, seek medical attention.
Ingestion
5. FIRE FIGHTING MEASURES
o o
> 93.3 C (> 200 F); Pensky-Martens Closed Cup
Flashpoint and method
Refer to section 10
Hazardous combustion products:
Dry chemical, CO2, water spray or regular foam
Extinguishing media:
None known
Unsuitable extinguishing media:
None known
Unusual fire and explosion hazards:
None established
Special Firefighting Procedures:
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate personal protective equipment.
Personal precautions
Soak up with inert absorbent material. Slowly vacuum or sweep
Procedures if material is released
the material into a bag or other sealed container. Dispose of in
or spilled
compliance with federal, state, and local regulations. See also
Section 13 Disposal considerations.
Do not let product enter drains. Do not flush into surface water
Environmental precautions
or sanitary sewer system.
7. HANDLING AND STORAGE
Avoid contact with skin, eyes and clothing.
Handling
Keep out of the reach of children.
Storage
Keep away from excessive heat and cold.
Do not handle or store near an open flame, heat or other source
of ignition. Do not use containers made of metal. Opaque, high
density polyethylene (HDPE) containers are recommended for
shipping and storage.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limits have not been established for this product.
Exposure limit values
ACGIH-Occupational Exposure Limits 鈥? TWAs
3
Substituted phenol 鈥? proprietary 鈥? 10 mg/m TWA
Material name: Lightscribe Coating V1.2
Date prepared: 1 July 2006
Page 2 of 4
MATERIAL SAFETY DATA SHEET
OSHA- Final PELs 鈥? Time Weighted Averages (TWAs)
3
Substituted phenol 鈥? proprietary 鈥? 15 mg/m TWA (total
dust); 5 mg/m3 TWA (respirable dust)
Personal protective equipment
Avoid contact with skin, eyes and clothing.
General
Handle in accordance with good industrial hygiene and safety
practice. Launder contaminated clothing before reuse. Keep away
Hygiene measures
from food and drink.
Additional area ventilation or local exhaust may be required to
Engineering controls
maintain air concentrations below recommended exposure limits.
Use in well ventilated area.
Exposure guidelines
9. PHYSICAL AND CHEMICAL PROPERTIES
Not determined
pH
Not determined
Vapor pressure
o o
> 93.3 C (> 200 F
Flash point
Not determined
Evaporation rate
Not determined
Oxidizing properties
Dark green
Color
10. CHEMICAL STABILITY & REACTIVITY INFORMATION
Stable under recommended storage conditions
Stability
Will not occur
Hazardous polymerization
Upon decomposition, this product may yield gaseous nitrogen
Hazardous decomposition
oxides, carbon monoxide and/or low molecular weight
products
hydrocarbons
Incompatible with strong bases and oxidizing agents
Incompatibility
11. TOXICOLOGICAL INFORMATION
Complete toxicity data are not available for this specific formulation. Refer to Section 3 for potential
health effects and Section 4 for first aid measures.
NIOSH 鈥? Pocket Guide 鈥? Target Organs
Symptoms and target organs
Substituted phenol 鈥? proprietary 鈥? eyes, skin and
respiratory system
NIOSH 鈥? Pocket Guide 鈥? Target Organs
Substituted benzene 鈥? proprietary 鈥? eyes, skin, respiratory
system, liver and kidneys
12. ECOLOGICAL INFORMATION
This product has not been tested for ecological effects.
Other information
13. DISPOSAL CONSIDERATIONS
Dispose in compliance with federal, state, and local regulations.
Disposal instructions
14. TRANSPORTATION INFORMATION
This product, as supplied, is not regulated nor classified as a
General
hazardous material/dangerous good by United States
Department of Transportation (DOT), International Air Transport
Association (IATA), European Road Regulations (ADR),
Material name: Lightscribe Coating V1.2
Date prepared: 1 July 2006
Page 3 of 4
MATERIAL SAFETY DATA SHEET
European Rail Regulations (RID), or International Maritime
Organization (IMO).
IATA
Not applicable
Proper shipping name
Not applicable
Hazard class
None
Packaging exceptions
None
Identification number (UN)
Not applicable
Packing group
15. REGULATORY INFORMATION
All chemical substances in this product are notified or exempt
International regulations
from notification under chemical substances notification laws in
the following countries: US (TSCA), EU (EINECS/ELINCS), and
Japan (ENCS).
EU Classification and labeling
Xi 鈥? Irritant N 鈥? Dangerous for the environment
Contains hexamethylene diacrylate,
may produce an allergic reaction.
R36/37/38 Irritating to eyes, respiratory system and skin
Risk phrases
R43 May cause sensitization by skin contact
R51/53 Toxic to aquatic organisms, may cause long term
adverse effects in the aquatic environment
S24/25 Avoid contact with skin and eyes
Safety phrases
S26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice
S36/37 Wear suitable protective clothing and gloves
S57 Use appropriate container to avoid environmental
contamination
S61 Avoid release to the environment. Refer to special
instructions/safety data sheets.
US TSCA 12(b): Contains 1-butanone, 2-(dimethylamino)-2-[(4-
US federal regulations
methylphenyl)methyl]-1-[4-(4-morpholinyl)phenyl] (CASRN
119344-86-4).
Health 2
HMIS ratings
Flammability 1
Reactivity 0
Health 2
NFPA ratings
Flammability 1
Reactivity 0
16. OTHER INFORMATION
This Material Safety Data Sheet is provided without charge to customers of Hewlett-
Disclaimer
Packard Company. Data is the most current known to Hewlett-Packard Company at
the time of preparation of this MSDS and is believed to be accurate. It should not be
construed as guaranteeing specific properties of the products as described or
suitability for a particular application.
Material name: Lightscribe Coating V1.2
Date prepared: 1 July 2006
Page 4 of 4
|