Page 1 of 4
HUDSON MATERIAL SAFETY DATA SHEET
DATE PREPARED: 12/04/2002
MSDS No: 18DC15M
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT DESCRIPTION: Diamond Compounds
PRODUCT CODE: 18DC15M- 15 micron (Monocrystalline), medium concentrate, 18 gram tube
MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS
Hudson Supply Company CHEMTREC (U.S.): (800) 424-9300
4500 Lee Rd Emergency Phone: (800) 424-9300
Cleveland, OH 44128-2959
Customer Service: (800) 486-0480
2. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS#
Polyalklene Glycol 60 - 65 9038-95-3
Ethoxylated Tall Oil 18 - 21 65071-95-6
Poly(oxy-1,2-ethanediyl), a-hydro-w-hydroxy- 1-3 25322-68-3
Silica, amorphous 7 - 10 7631-86-9
Diamond 5 - 10 7782-40-3
COMPONENTS :
EXPOSURE LIMITS
Chemical Name OSHA PEL ACGIH TLV Supplier
Polyalklene Glycol
Ethoxylated Tall Oil
Silica, amorphous 6 mg/m3 10 mg/m3
Diamond 10 10
3. HAZARDS IDENTIFICATION
POTENTIAL HEALTH EFFECTS
EYES: May cause significant irritation to the eyes.
SKIN: May cause significant irritation to the skin.
INGESTION: May cause significant irritation to the digestive tract.
INHALATION: May cause significant irritation to the lungs, upper respiratory tract and nose.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
Page 2 of 4
EYES: Redness and possible itching and/or tearing of the eyes.
SKIN: Redness and/or itching of the skin
INGESTION: Possible nausea and/or vomiting.
INHALATION: Possible coughing, burning, tightness of chest and/or shortness of breath.
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for two to three minutes. Remove any
contact lenses and continue flushing for 15 minutes. Get medical attention.
SKIN: Wash thoroughly with soap and water.
INGESTION: Wash out mouth with water and keep at rest. Seek immediate medical attention.
INHALATION: Remove from further exposure. Keep warm and at rest. If cough or other
symptoms develop, seek medical attention.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: 100掳C Penskey-Marten CC
FLAMMABLE LIMITS: .5 to .5
EXTINGUISHING MEDIA: CO2 or Dry chemical
EXPLOSION HAZARDS: None Expected.
FIRE FIGHTING PROCEDURES: None Expected.
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: flush with water
LARGE SPILL: Sweep or vacuum spills into appropriate containers for disposal. Follow standard
landfill methods consistent with applicable Federal, State and Local laws.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: When mist is generated, keep below recommended PEL/TLV levels, or
use appropriate respirators. See OSHA 29 CFR 1910
HANDLING: Avoid open flame
STORAGE TEMPERATURE: 100掳C maximum
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Provide sufficient local exhaust and general ventilation to maintain
exposure below PEL(s), especially for spraying operations which produce mists.
Page 3 of 4
PERSONAL PROTECTION
EYES AND FACE: Wear safety glasses with side shields or goggles when handling this material.
SKIN: To prevent any contact, wear impervious protective clothing such as neoprene or butyl
rubber gloves, apron, boots or whole bodysuit, as appropriate.
RESPIRATORY: Use NIOSH/MSHA approved air supplied respirator in absence of proper
environmental control.
WORK HYGIENIC PRACTICES: Facilities storing or using this material should be equipped with an
eyewash facility and a safety shower.
Good personal hygiene practices should always be followed.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Blue paste
ODOR: Mildly scented.
PERCENT VOLATILE: 80
VAPOR PRESSURE: Negligible
VAPOR DENSITY: Not Applicable
BOILING POINT: > 200掳C
MELTING POINT: -50掳C
SOLUBILITY IN WATER: Soluble
EVAPORATION RATE: Not Applicable
SPECIFIC GRAVITY: 1.2
10. STABILITY AND REACTIVITY
STABLE: YES
HAZARDOUS POLYMERIZATION: NO
CONDITIONS TO AVOID: Not Applicable
STABILITY: The product is stable under normal ambient conditions of temperature and pressure.
POLYMERIZATION: Will not occur
HAZARDOUS DECOMPOSITION: Oxides of Carbon.
INCOMPATIBLE MATERIALS: Strong bases
11. TOXICOLOGICAL INFORMATION
COMMENTS: Not Applicable
Page 4 of 4
12. ECOLOGICAL INFORMATION
COMMENTS: Not Applicable
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: In compliance with Federal, State and local regulations for landfills.
PRODUCT DISPOSAL: Dispose of at a supervised incineration facility or an appropriate waste
disposal facility according to current applicable laws and regulations and product
characteristics at time of disposal.
14. TRANSPORT INFORMATION
COMMENTS: Not regulated as a hazardous material.
15. REGULATORY INFORMATION
GENERAL COMMENTS: Not Applicable
16. OTHER INFORMATION
APPROVED BY: David C. Dillon TITLE: Systems Administrator
APPROVAL DATE: 12/05/2002
REVISION SUMMARY New MSDS
NFPA CODES
FIRE: 1 HEALTH: 1 REACTIVITY: 0 SPECIAL: 1
MANUFACTURER DISCLAIMER: Information given herein is offered in good faith as accurate, but
without guarantee. Conditions of use and suitability of the product for particular uses are
beyond our control; all risks of use of the product are therefore assumed by the user. Nothing
is intended as a recommendation for uses which infringe valid patents or as extending license
under valid patents. Appropriate warnings and safe handling procedures should be provided to
handlers and users.
|