MATERIAL SAFETY DATA SHEET



Complies with OSHA hazard communication standard 29 CFR 1910.1200                                                            Ratings

                                                                                                                             HMIS       NFPA

Scot Laboratories                                       Phone:      (440) 543-3033                    Health                 1          1

16841 Park Circle Drive                                 Fax:        (440) 543-1825                    Flammability           4          4

Chagrin Falls, OH 44023                                 Date:       September 28, 2000                Reactivity             0          0



SECTION I - Product Identification

Product Name:       RUST PREVENTATIVE

Product Code:       D 58



SECTION II - Hazardous Ingredients/Identity Information -           OSHA PEL               ACGIH TLV             STEL        %

Kerosene 8008-20-6                                                  400                                                      50-60

(contains 0.5-1.0% xylene, 1330-20-7; 0.5-1.0%

 naphthalene, 91-20-3; and 0.4-1.2% biphenyl, 92-52-4)

Mineral spirits 8052-41-3                                           100                    100                               10-20

(may contain 3.5% 1,2,4 Trimethylbenzene, 95-63-6)

Propane/Isobutane/n-Butane 74-98-6                                  1000                   1000             Asphyxiant       10-20

                                                                                                3

Naphthionic Oil 64742-52-5                                                                 5mg/m mist                        1-10

Non-hazardous                                                                                                                1-10



* TOXIC (In accordance with reporting requirements of SARA (1986), Sec. 313, Title III and 40 CFR, part 372.)



SECTION III - Physical/Chemical Characteristics

Color:                        Dark                      Vapor Density (AIR = 1):           4.0

Odor:                         Solvent                   Vapor Pressure (PSIG @70F):        45

Specific Gravity (H2O = 1):   0.7                       Solubility in Water:               Nil

Boiling Point (range):        -4 to > 550F              Evaporation Rate:                  < 1 (Butyl Acetate = 1)

Melting Point (pH - Liquid):  N.A.



SECTION IV - Fire and Explosion Hazard Data - NFPA 30B Rating:               III

Flash Point (TCC):              -142F                            Fire Fighting Procedure:                        Aerosol cans may rupture when heated.

Flammability Limits in Air:     LEL - 1.8, UEL - 9.5             Unusual Fire or Explosion Hazards:              Heated cans may burst.

Extinguishing Media: Use water fog, dry chemical or carbon dioxide.



SECTION V - Reactivity Data

Stability:                                   Stable

Material to Avoid:                           Strong oxidizers, strong mineral acids, nitrates.

Hazardous Decomposition or Byproducts:       In fire - carbon dioxide and water. (Hazardous Polymerization will not occur)



SECTION VI - Health Hazard Data

Symptoms of exposure:                       INHALATION - difficulty breathing. SKIN - redness. INGESTION - vomiting.

Carcinogenic ingredients:                   Not listed.

Effects of overexposure:        May cause dizziness or narcosis in high vapor concentrations. Will cause defatting of skin. Effects are

                                reversible. Long-term exposure to high concentrations of vapor may cause lung, liver or kidney damage. The

                                solvent listed have been reported to affect the central nervous system. May irritate the eyes, skin or respiratory

                                tract. Aspiration hazard if swallowed.

Medical Conditions aggravated by use:       Heart disease, Respiratory disorders.

First Aid Procedures:           Give oxygen - Do not induce vomiting - Gastric lavage - Wash eyes and skin with water.



SECTION VII - Precautions for Safe Handling and Use

In case of Release or Spill:   Use absorbent sweeping compound to soak up material. Put into container. Dispose as hazardous waste.

Waste Disposal Method:         Dispose as hazardous waste in accordance with EPA RCRA.

Handling and Storing:          Keep away from heat, sparks or open flame. Store at temperatures below 120_ F.

Other Precautions:             When spraying more than one-half can continuously or more than one can consecutively, use NIOSH approved respirator.



SECTION VIII - Control Measures

Gloves:             NONE                                Respirator:                        SCBA if above TLV limit exceeding.

Eye Protection:     Yes                                 Ventilation:                       Local exhaust.

Other Protection:   Long sleeve and pants.              Work/Hygienic Practices:           Do not smoke while using. Wash hands after use.



                                                                          DISCLAIMER

The information contained herein was obtained from current and reliable sources. However, the data is provided without any warranty, expressed or implied,

regarding its correctness or accuracy. Since the conditions for use, handling, storage and disposal of this product are beyond Scot Laboratories' control, it is

the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense arising from the

product's improper use. No warranty, expressed or implied, regarding the product described herein shall be created by or inferred from any statement or

omission in this MSDS. Various government agencies (e.g., DOT, EPA, FDA) may have specific regulations concerning the transportation, handling, storage,

use or disposal of this product which may not be reflected in this MSDS. The user should review these regulations to ensure full compliance.