Material Safety Data Sheet

                                               Date: April 15, 2002



SECTION - 1: [Product and Company Identification]                       filename “Msds.ALLWIK-SOCS�



       �     Product Items� Names:

                       AW430                 AW412              AW806               AW124







       �     Chemical Name:              Polypropylene [CAS # 9003-07-0]         {>99 %}

                                         Carbon Black [CAS # 1333-86-4]          {<0.1%}

                                         Proprietary Surfactant                  {<0.1%}





       �     Chemical Family:            Polyolefin / Hydrocarbon





       �     Product Description:        Fibrous sorbent in a particulate form contained within a tubular scrim

                                         of the same chemical composition as the sorbent. Color is predominately light

                                         gray. Trace other color is possible. Odor may be mild hydrocarbon. There may be

                                         logo printing on the product.





       �     Contact Address:            Sorbent Products Company, 645 Howard Avenue, Somerset, NJ 08873





       �     Emergency Telephone: 800-333-7672 (24-Hours)



SECTION - 2: [Hazardous Ingredients & Exposure Limits]

       �     This product contains no hazardous ingredients.

       �     This product is defined as an “Article� and does not require an MSDS as defined in 29 CFR 1910.1200 of

             the U.S. Occupational Safety & Health Standard. MSDS provided only by request of customer.



SECTION - 3: [Typical Physical & Chemical Characteristics]



           Specific Gravity              0.90 - 0.92                    % Volatiles                    0

           Melting Point                 325 degrees F                  Solubility in Water            0

           Freezing Point                not applicable                 Form                           solid

           Boiling Point                 not applicable                 Density                        0.04 - 0.06 g/cc

           pH                            not applicable                 Evaporation Rate               0



SECTION - 4: [Fire, Explosion, & Reactivity Data]

       �     Flash Point:                > 600-deg. F (estimated)

       �     Flammability Limits:        not flammable

       �     Auto-Ignition Temp.:        > 600-deg. F (estimated)

       �     Incompatibility with:       none known (chemical resistance is high)

       �     Stability Considerations:

                                         �   Highly stable

                                         �   Temperatures over 480-deg. F may cause degradation

       �   Conditions to avoid:      none known (chemical resistance is excellent).





       �   Fire Fighting:

                 �    Be cautious of hot melted polypropylene.

                 �    Use water spray to cool fire exposed surfaces & to protect personnel.

                 �    Isolate product from fire.

                 �    Extinguish fire with water spray.

                 �    Respiratory & eye protection is required for fire fighting personnel.

                 �    Decomposition Products Under Fire Conditions:

                           â—?     Oxygen-lean conditions may cause carbon monoxide & irritating smoke.



SECTION - 5: [Health Information & Protection]

       �   Eye Protection:           Product is inert; none required.

       �   Skin Contact:             Product is inert; none required, except if melted use gloves.

                                     For hot melted product, immerse in or flush affected area with water to dissipate

                                     the heat, then obtain medical attention for burn care.

       �   Inhalation:               Not applicable.

       �   Ingestion::               First aid not normally required.

       �   Exposure Limits:          None

       �   Threshold Limits:         None

       �   Personal Protection:      None (ambient conditions)

       �   NPCA-HMIS Rating:

                                     �     Health                       0

                                     �     Flammability                 1

                                     �     Reactivity                   0

       �   NFPA-704 Rating:

                                     �     Health                       0

                                     �     Flammability                 1

                                     �     Reactivity                   0



SECTION - 6: [Spill/Leak Control & Special Precautions]

       �   Land:                     Recover material & place in suitable container for reuse, or for

                                     disposal in conformance with local regulations.

       �   Water:                    Recover material & place in suitable container for reuse, or for

                                     disposal in conformance with local regulations.

       �   Storage & Handling:       No precautions noted - see local regulation if needed.

                                     � Storage Temperature: Ambient

                                     � Storage Pressure:           Atmospheric



SECTION - 7: [Regulatory Information]

       �   Department of Transportation (DOT):

               �   DOT Hazard Class:                       Not Regulated

               �   DOT Identification No.:                 None

       �   TSCA:           This product is listed in the TSCA Inventory

       �   CERCLA:         This product is not subject to reporting.

       �   SARA:           (Title-III) Not Hazardous; No Reportable Ingredients



SECTION - 8: [Disclaimer]

       �   While Sorbent Products Company believes that the data set forth in this sheet is accurate, Sorbent Products

           Company makes no warranty with respect thereto, and expressly disclaims all liability for reliance thereon.

           Please consider the assistance of individuals trained in proper evaluation for health-related data.