Albidur EP 5340 Page 1 of 5
EEC Material Safety Data Sheet Printed: February 21, 2006
according to EC directive 91/155/EEC Revised: January 11, 2006
Replaces issue:
1. Company
Supplier: nanoresins AG
Address: Charlottenburger Str. 9 D-21502 Geesthacht
Phone: 49 - 4152 鈥? 1390-0
Fax: 49 - 4152 鈥? 1390-100
Emergency Poison Information Center
Telephone: 49 鈥? 0551 鈥? 19240
2. Information on Ingredients
2.1 Chemical Name: Composition of cycloaliphatic epoxy resin and polysiloxane rubber
2.2 Dangerous Ingredients:
Substances: 3,4 Epoxycyclohexylmethyl-3,4-epoxycyclohexylcarboxylate
CAS No.: 2386-87-0
CAS name:
EINECS-No.: 219-207-4
EEC-No.:
Concentration: 55 - 60 %
Symbol: Xi
Risk-phrases: 36/38-43
3. Hazards Identification
Irritating to eyes and skin.
May cause sensitization by skin contact. Avoid contact with skin.
Product may cause abdominal discomfort.
4. First Aid Measures
4.1 General notice: Remove contaminated clothing immediately.
4.2 Inhalation: Remove to fresh air.
4.3 Skin contact: Remove contaminated clothing, wash skin with plenty of cold to lukewarm water
and soap.
4.4 Eye contact: Flush eyes immediately with water for at least 15 min. Seek medical advice on
persisting symptoms.
4.5 Ingestion: Give water to drink, induce vomiting. Seek medical advice immediately.
4.6 Advice to physician: Treatment of overexposure should be focused on symptoms and conditions of
the patient, as a special antidote does not exist.
Albidur EP 5340 Page 2 of 5
EEC Material Safety Data Sheet Printed: February 21, 2006
according to EC directive 91/155/EEC Revised: January 11, 2006
Replaces issue:
5. Fire Fighting Measures
5.1 Extinguishing media: Suitable: Foam, CO2, powder
Non suitable: Compact jet of water
5.2 Unusual fire and If this product is exposed to extreme heat, e. g. in a
explosion hazards: fire, it might polymerize and a closed container might burst. Cool endangered
containers with jet of water.
5.3 Protective equipment: Wear self-contained breathing apparatus and protective clothing.
5.4 Additional advice: Do not point a hard jet of water or foam at hot burning liquid; this may cause
foam expansion and increase the fire.
6. Accidental Release Measures
6.1 Precautionary Remove ignition sources.
measure:
6.2 Environmental Avoid discharge to natural waters or sewers.
protection measure:
6.3 Cleaning measure: Cover with inert absorbent material and collect for disposal.
6.4 Additional advice: Wear protective clothing.
7. Handling and Storage
7.1 Handling: Avoid contact with eyes, skin and clothing. Usual precautions as with any
chemical.
7.2 Storage: Keep containers closed.
7.3 Storage conditions: Cool, dark and dry Do not store together with acids, amines and strong
alkaline substances.
Albidur EP 5340 Page 3 of 5
EEC Material Safety Data Sheet Printed: February 21, 2006
according to EC directive 91/155/EEC Revised: January 11, 2006
Replaces issue:
8. Exposure Controls and Personal Protection
8.1 Exposure controls:
8.2 Personal protection: Respiratory protection: If product is heated in a closed or poor ventilated room a
self contained breathing apparatus might be necessary.
Ventilation: Normal room ventilation
Protective gloves: PVC coated or rubber latex gloves
Eye protection: Goggles recommended
Other protective equipment: Local exhaust
8.3 Additional advice:
9. Physical and Chemical Properties
9.1.1 Appearance: liquid
9.1.2 Color: white
9.1.3 Odor: slight
9.2 Typical values
Boiling point (1.013 hPa) >200 C
Melting point <-20 C
Density (20 C) appr. 1.06 g/ml
Vapor pressure (20 C) <0.1 mbar
Vapor density ( C) mbar
Viscosity (25 C) approx.5000 mPa路s
Solubility
in water ( ) insoluble g/l
in ( C) g/l
pH ( C)
Solvent content
Solid content
Flash point >120 C
Ignition temperature C
Autoflammability
Flammability limits Lower Upper
Additional advice
Albidur EP 5340 Page 4 of 5
EEC Material Safety Data Sheet Printed: February 21, 2006
according to EC directive 91/155/EEC Revised: January 11, 2006
Replaces issue:
10. Stability and Reactivity
Stability: Reacts upon heat influence, acids, amines, and strong alkaline
substances.
Materials to avoid: Acids, strong alkaline substances and amines.
Conditions to avoid:
Hazardous combustion or Unknown
decomposition products:
Hazardous polymerization: Polymerization possible upon heat influence.
11. Toxicological Information
Skin contact: Slight irritation.
Eye contact: Severe irritation; may cause swelling of conjunctiva.
Sensitization: Possible upon repeated skin contact.
Repeated overexposure to concentrated vapours may cause health damaging.
12. Ecological Information
Avoid discharge to natural waters, sewers, and biological waste water treatment plants.
13. Disposal Considerations
Disposal: Collect for disposal. Dilute product with inactive solvent. Incineration
recommended.
Classification: Incinerate according to appropriate regulations.
14. Transport Information
ADR/RID UN-No.:
ICAO / IATA Packing group
IMDG-Code Hazard identification No
Marine pollutant
Additional advice: No transport classification
Albidur EP 5340 Page 5 of 5
EEC Material Safety Data Sheet Printed: February 21, 2006
according to EC directive 91/155/EEC Revised: January 11, 2006
Replaces issue:
15. Regulatory Information
EEC label name:
Symbol: Xi
Risk phrases: 36/38-43
R 36/38: Irritating to eyes and skin.
R 43: May cause sensitization by skin contact.
Safety phrases: 24-28.2-37/39
S 24: Avoid contact with skin.
S 28.2: After contact with skin, wash immediately with plenty of soap and water.
S 37/39: Wear suitable gloves and eye/face protection
16. Additional Advice
Please see Technical Data Sheet also.
|