STRAHL & PITSCH MATERIAL SAFETY DATA SHEET
Product Name: Ceresine Wax Page 1 of 4
Product Code: SP-240
1. Chemical Product and Company Identification
Product Name: Ceresine Wax
Product Code: SP-240
Generic Name: Ceresine Wax
INCI Name: Ceresin
Chemical Family: Mineral
Responsible Party: STRAHL & PITSCH INC. For further information, contact
230 Great East Neck Road 631 587-9000
West Babylon, NY 11704 8 AM - 5 PM Eastern Time
Monday thru Friday
Health Hazards: None anticipated
Physical Hazards: This material may burn but will not ignite readily. Keep away from all sources of ignition.
* Physical Form: Solid NFPA Hazard Class: Health: 0 (Least)
* Appearance: White Flammability: 1 (Slight)
* Odor: None to slight - characteristic Reactivity: 0 (Least)
2. Composition/Information on Ingredients
Hazardous Components: None
Other Components Exposure Guideline
75% Paraffin Wax CAS #8002-74-2 Limits Agency Type
25% Microcrystalline Wax CAS #63231-60-7 --------None Known--------
3. Hazards Identification
Potential Health Effects:
Eye: Solid material is not expected to be an eye irritant; however, contact with molten wax may cause
thermal burns. Vapors from molten wax may cause watering of the eyes.
Skin: Solid material is not expected to be a skin irritant; however, skin contact with molten wax may cause
thermal burns. No harmful effects from skin absorption are expected.
Inhalation (Breathing): Vapors emitted from molten wax are expected to have a low degree of irritation by inhalation.
Ingestion (Swallowing): No harmful effects expected
Signs and Symptoms: Effects of overexposure may include irritation of the nose and throat
Cancer: No data available
Target Organs: No data available
Developmental: No data available
Pre-Existing Medical Conditions: None known
4. First Aid Measures
Eye: If irritation or redness develops from exposure to fumes generated during hot-melt processing operations,
move victim away from exposure and into fresh air. Flush eyes with clean water. If irritation or redness per-
sists, seek medical attention. For contact with the molten material, gently open eyelids and flush affected
eye(s) with cold water. Seek immediate medical attention.
Skin: For contact with molten material, leave material on skin and flush or immerse affected area(s), using cold
water. Seek medical attention.
Inhalation (Breathing): If respiratory symptoms develop from exposure to fumes emitted by the molten material,
move victim away from source of exposure and into fresh air. If symptoms persist, seek medical attention. If
victim is not breathing, immediately begin artificial respiration. If breathing difficulties develop, oxygen
should be administered by qualified personnel. Seek immediate medical attention.
Ingestion (Swallowing): First aid is not normally required for the solid material; however, if molten material is
swallowed, seek immediate medical attention.
Note to Physicians: None
STRAHL & PITSCH MATERIAL SAFETY DATA SHEET
Product Name: Ceresine Wax Page 2 of 4
Product Code: SP-240
5. Fire-fighting Measures
Flammable Properties: Flash Point: 400 Degrees F (COC) Minimum
OSHA Flammability Class: Not regulated
LEL/UEL: No data
Autoignition Temperature: No data
Burn Rate (solids): No data
Unusual Fire & Explosion Hazards: This material may burn, but will not ignite readily.
Extinguishing Media: Dry chemical, foam, water, sand, or earth is recommended.
Fire-fighting Instructions: Emergency responders in the danger area should wear bunker gear and self-
contained breathing apparatus for fires beyond the incipient state (29CFR 1910.156). In addition, wear other
appropriate protective equipment as conditions warrant (see Section 8). Isolate danger area, keep
unauthorized personnel out. Contain spill if it can be done with minimal risk. Move undamaged con-
tainers from danger area if it can be done with minimal risk. With water, cool equipment exposed to fire if it
can be done with minimal risk.
6. Accidental Release Measures
This material may burn but will not ignite readily. Keep all sources of ignition away from spill/release. Stay
upwind and away from spill. Isolate danger area and keep unauthorized personnel out. Contain spill if it
can be done with minimal risk. Wear appropriate protective equipment, including respiratory protection, as
conditions warrant (see Section 8). Prevent spilled material from entering sewers, storm drains, other
unauthorized treatment drainage systems, and natural waterways. Notify fire authorities and appropriate
federal, state, and local agencies. Cleanup under expert supervision is advised. Minimize dust generation.
Sweep up and package appropriately for disposal.
7. Handling and Storage
Handling: Wash thoroughly after handling. Do not wear contaminated clothing or shoes. Use good personal
hygiene practice.
"Empty" containers retain residue (liquid and/or vapor) and may be dangerous. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition.
They may explode and cause injury or death. All containers should be disposed of in an environmentally-
safe manner and in accordance with governmental regulations. Before working on or in tanks which
contain or have contained this material, refer to Occupational Safety and Health Administration Regulations,
ANSI Z49.1 and other governmental and industrial references pertaining to cleaning, repairing, welding,
or other contemplated operations.
Storage: Keep container(s) tightly closed. Use and store this material in cool, dry, well-ventilated areas away
from heat and all sources of ignition. Store only in approved containers. Keep away from any incompatible
material (see Section 10). Protect container(s) against physical damage.
STRAHL & PITSCH MATERIAL SAFETY DATA SHEET
Product Name: Ceresine Wax Page 3 of 4
Product Code: SP-240
8. Exposure Controls/Personal Protection
Personal Protective Equipment (PPE):
Respiratory: No respiratory protection is required when working with the solid material. If airborne concentrations
of wax fumes, generated from molten wax, are expected, a NIOSH/MSHA approved air purifying respirator
with a dust/mist/fume filter may be used. Protection provided by air purifying respirators is limited (see
manufacturer's respirator selection guide). Use a positive pressure air supplied respirator if there is
potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air
purifying respirators may not provide adequate protection. A respiratory protection program that meets
OSHA's 29 CFR 1910.34 and ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
Skin: Not normally required for solid material. The use of thermally-resistant gloves is recommended when
there is potential for exposure to molten wax.
Eye/Face: Approved eye protection to safeguard against potential eye contact, irritation, or injury is recommended.
Other Protective Equipment: A source of clean water should be available in the work area for flushing eyes
and skin. Impervious clothing should be worn as needed.
9. Physical and Chemical Properties
Note: Unless otherwise stated, values are determined at 20 Degrees C (68 Degrees F) and 760 mm Hg (1 atm).
Flash Point: 400 Degrees F Minimum
Flammable/Explosive Limits (%): No data
Autoignition Temperature: No data
Burn Rate (solids only): No data
Appearance: White
Physical State: Solid
Odor: None to slight - characteristic
Vapor Pressure (mm Hg): No data
Vapor Density (air+1): No data
Boiling Point: >650 Deg. F/343 Deg. C
Melting Point: 129-140 Deg. F/53.8-60.0 Deg. C
Solubility in Water: Negligible
Specific Gravity: Approximately 0.96
Percent Volatile: Negligible
Bulk Density: Approximately 7 pounds per gallon
10. Stability and Reactivity
Chemical Stability: Stable under normal conditions of storage and handling.
Conditions to Avoid: Avoid all possible sources of ignition (see Sections 5 and 7).
Incompatible Materials: Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products: Combustion can yield major amounts of oxides of carbon and minor
amounts of oxides of sulfer and nitrogen.
Hazardous Polymerization: Will not occur.
11. Toxicological Information
No definitive information available on carcinogenicity, mutagenicity, target organs or developmental toxicity.
STRAHL & PITSCH MATERIAL SAFETY DATA SHEET
Product Name: Ceresine Wax Page 4 of 4
Product Code: SP-240
12. Disposal Considerations
This material, if discarded as produced, is not a RCRA "listed" or "characteristic" hazardous waste. Use which
results in chemical or physical change or contamination may subject it to hazardous waste regulations. Along
with properly characterizing all waste materials, consult state and local regulations regarding the proper disposal
of this material.
13. Transport Information
Hazard Class or Division: Not classified as hazardous
14. Regulatory Information
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
- --None---
---------------------------------
WARNING:
This material contains the following chemicals which are known to the State of California to cause cancer,
birth defects or other reproductive harm, and are subject to the requirements of California Proposition 65
CA Health & Safety Code Section 25249.5)
---None Known---
---------------------------------
This material has not been identified as a carcinogen by NTP, IARC, or OSHA
---------------------------------
EPA (CERCLA) Reportable Quantity:
- --None---
15. Documentary Information
Issue Date: February 26, 2007
Product Code: SP-240
Previous Product Code: SP-240
16. Disclaimer of Expressed and Implied Warranties
The information in this document is believed to be correct as of the date issued.
HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE,
OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR
COMPLETENESS OF THIS INFORMATION, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS
INFORMATION OR THE PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED
TO ITS USE.
This information and product are furnished on the condition that the person receiving them shall make his own
determination as to the suitability of the product for his particular purpose and on the condition that he assume
the risk of his use thereof.
|