MSDS Number: 15X015 AEROSOL LACQUER SANDING SEALER Printing Date: 04/26/2006 Page 1 of 5
Material Safety Data Sheet
For Coatings, Resins and Related Materials
NOTE: 聽 CHEMTREC, CANUTEC and National Response Center emergency numbers to be used only in the event of
chemical emergencies involving a spill, leak, fire, exposure or accident involving chemicals
24 Hour Emergency:聽 1-800-123-4567 CHEMTREC:聽 1-800-424-9300
National Response in Canada聽 CANUTEC:聽 613-996-6666
Outside U.S. and Canada聽 Chemtrec: 聽 202-483-7616
Section 1 - Chemical Product / Company Information
Product Name: AEROSOL LACQUER SANDING SEALER Revision Date: 04/26/2006
Identification Number: 15X015 Print Date: 04/26/2006
聽 聽
Product Use/Class: LACQUER
Manufacturer: Deft, Inc.聽 (CAGE CODE 33461) Information Phone: (949) 474-0400
17451 Von Karman Ave Emergency Phone: (800) 424-9300
Irvine, Ca.聽 92614
Section 2 - Hazards Identification
*** Emergency Overview ***:聽 May cause burns to the eyes and skin. Flammable liquid and vapors. Amber liquid in aerosol
container. Effects the central nervous system. Harmful by inhalation, in contact with skin, and if swallowed. Contact with
eyes or skin causes irritation.
Effects Of Overexposure - Eye Contact: 聽 Contact may cause excessive blinking and tear production or damage to the
conjunctiva may occur. Contact with eyes may cause blurred vision. Exposure to liquid, aerosol, or vapors may cause
irritation, tearing, redness, and swelling accompanied by a stinging sensation. Direct eye contact may cause irritation.
Exposure may cause conjunctivitis. May cause swelling of the conjunctiva, corneal injury, or burns to the eye.
Effects Of Overexposure - Skin Contact: 聽 Direct skin contact may cause irritation. Exposure may cause skin burns.
Repeated skin contact may cause absorption through the skin, which may cause a coma. The severity of the coma depends
on the amount of product absorbed through the skin or ingested. Contact with skin may cause blistering. Prolonged and
repeated skin contact may cause dermatitis, drying, and defatting due to the solvent properties. Symptoms may include
swelling, redness, and rash.
Effects Of Overexposure - Inhalation: 聽 May cause irregular heartbeats, a tight feeling in the chest, respiratory depression,
and narcosis. Exposure may cause liveliness, a light-headed feeling, and giddiness followed by nausea, weakness, fatigue,
and drowsiness. Exposure to high concentrations or overexposure to one or more components may cause respiratory
depression or failure, difficult breathing, chest constriction, loss of consciousness, or death. Exposure may cause pulmonary
edema. Exposure may cause irreversible damage to the nervous system and brain. Exposure may cause vomiting.
Inhalation may cause headaches and difficult breathing. Inhalation of vapors may cause feelings of euphoria and anesthetic
effects. Prolonged exposure may cause narcosis, rapid breathing and death from asphyxiation. Exposure may cause
coughing, chest pain, nasal discomfort, and discharge. Inhalation may cause irritation to the respiratory tract (nose, mouth,
mucous membranes) & acute nervous system depression characterized by the following progressive steps: headache,
dizziness, staggering gait, confusion, unconsciousness, or coma.
Effects Of Overexposure - Ingestion:聽聽 Vomiting may cause aspiration of the solvent, resulting in chemical pneumonitis.
May result in possible corrosive action in the mouth, stomach tissue and digestive tract. Ingestion may cause decreased
body temperature and blood pressure, drowsiness, headache, kidney failure, hemolytic anemia, shock, coma, or death.
Ingestion may cause a sore throat. Harmful or fatal if swallowed. Ingestion causes damage to the central nervous system. It
may include, acute nervous system depression, which is characterized by the following progressive steps: headache,
dizziness, staggering gait, confusion, drowsiness, unconsciousness, or coma. Ingestion may cause gastrointestinal irritation,
abdominal pain, nausea, vomiting, and diarrhea.
Effects Of Overexposure - Chronic Hazards:聽 In animal studies, exposure to a component(s) has been shown to cause
damage to the fetus, only at a level of exposure that would also harm the pregnant animal. The relevance of these findings
to humans is unknown. It also, has been shown to cause neuropathy and mild reversible kidney effects in laboratory
animals. Contains components listed as a Carcinogen: NTP? : No, IARC Monographs? : Yes, OSHA Regulated? : No.
Prolonged contact will cause drying and cracking of the skin, due to defatting action. Skin sensitization, asthma or other
allergic responses may develop. Overexposure to a component has been shown to cause damage to the liver and testis in
laboratory animals. Exposure may cause loss of coordination, confusion, slowed heart rate, effects on the liver and spleen,
respiratory depression, lung edema, kidney damage, mild temporary changes to the liver, low blood pressure, or coma.
Exposure to a component's vapors caused damage to the lining of the middle ear in animal studies. The relevance of these
findings is uncertain in humans. WARNING: This product contains a chemical known to the state of California to cause
cancer. Symptoms of overexposure may occur for up to 48 hours after the original exposure occurred. Exposure to
concentrated vapors may cause heart arrhythmias, especially those with preexisting heart conditions. Preexisting liver or
MSDS Number: 15X015 AEROSOL LACQUER SANDING SEALER Printing Date: 04/26/2006 Page 2 of 5
kidney disease may be aggravated by repeated or prolonged exposure.
Primary Route(s) Of Entry:聽 Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
Section 3 - Composition / Information On Ingredients
Component CAS Number Weight % Reporting Ranges
ACETONE 67-64-1 10-30
ISOBUTANE (2-METHYLPROPANE) 75-28-5 10-30
METHYL ETHYL KETONE 78-93-3 10-30
ODORLESS MINERAL SPIRITS 8052-41-3 5-10
VM & P NAPHTHA 64742-89-8 5-10
n-BUTYL ALCOHOL 71-36-3 3-7
n-BUTYL ACETATE 123-86-4 1-5
NITROCELLULOSE 9004-70-0 1-5
ISOBUTYL ISOBUTYRATE 97-85-8 1-5
METHYL n-AMYL KETONE 110-43-0 1-5
2-BUTOXYETHANOL 111-76-2 1-5
ISOPROPANOL ANHYDROUS 67-63-0 1-5
XYLENE 1330-20-7 1-5
METHYL ISOBUTYL KETONE 108-10-1 1-5
ETHYL BENZENE 100-41-4 0.1-1.0
ETHYL BENZENE 100-41-4 0.1-1.0
ISOBUTYL ALCOHOL 78-83-1 0.0-0.1
聽
THE ABOVE LISTED PRODUCTS ARE ON THE TSCA INVENTORY LIST.聽 ALSO ANY UNLISTED INGREDIENTS.
聽
Section 4 - First Aid Measures
First Aid - Eye Contact:聽 If material gets into eyes, flush with water immediately for 20 minutes. Hold eyelids open to rinse
out the entire eye. Consult a physician. If eyes are irritated from airborne exposure, move to fresh air.
First Aid - Skin Contact:聽 If rash or irritation develops, consult a physician. In case of contact, immediately flush skin with
plenty of water and wash affected areas thoroughly with soap and water. Remove contaminated clothing and shoes.
First Aid - Inhalation:聽 Asthmatic type symptoms may develop and maybe immediate or delayed by several hours. Give
oxygen or artificial respiration if needed. Move to fresh air in case of accidental inhalation of vapors. In the case of
inhalation of aerosol/mist call 911 immediately.
First Aid - Ingestion:聽 Do not induce vomiting. Do not give anything to an unconscious person. Obtain medical help.
Section 5 - Fire Fighting Measures
Flash Point (掳F): <20 TCC LOWER EXPLOSIVE LIMIT (%): 1.0UPPER EXPLOSIVE LIMIT (%): 13
Extinguishing Media: Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Fog, Water Spray, Dry Sand, Dry
Powder
Unusual Fire And Explosion Hazards: Flammable liquid. Vapors can form an ignitable mixture with air. Vapors can flow
along surfaces to a distant ignition source and flashback. A component may form explosive peroxides upon long-term
storage. Peroxides maybe shock sensitive. Remove all sources of ignition. Fire or intense heat may cause violent rupture of
packages. Do not use a cutting or welding torch near or on a drum of product, because vapors can ignite explosively, even
if the drum is empty and contains only product residue. Keep containers tightly closed. Isolate from heat, sparks, electrical
equipment and open flame. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must
be grounded. Toxic gases may form when product burns. Fire may ensue when product comes in contact with strong
oxidizers. Application to hot surfaces requires special precautions.
Special Firefighting Procedures: Flammable. Cool fire-exposed containers using water spray. Firefighters should wear full
protective clothing. In the event of fire, wear self-contained breathing apparatus.
Section 6 鈥? Accidental Release Measures
Steps To Be Taken If Material Is Released Or Spilled: Dike to prevent entering any sewer or waterway. Evacuate all non-
essential personnel. Remove all sources of ignition. Ventilate area. Contain and remove spilled material with inert
absorbent and non-sparking tools. Use personal protective equipment as necessary.
Section 7 - Handling and Storage
Handling: Use only in ventilated areas. Open doors and windows. Preparation may charge electrostatically: always use
grounding leads when transferring from one container to another. Protect container against physical damage. Handle in
accordance with good industrial hygiene and safety practice. Do not drill, solder, pressurize, grind, cut, weld, or braze
empty container. Do not expose empty container or product to heat, flame, sparks, open flames, hot surface, static
electricity, or any sources of ignition. Do not handle until the manufacturers safety precautions have been read and
understood.
Storage: Protect material from direct sunlight. Store in buildings designed to comply with OSHA 1910.106. Avoid storing
near high temperatures, fire, open flames, and spark sources. Keep container away from incompatible material. Under long-
term storage or oxidizing conditions, peroxides of unknown stability may form. Do not open container if peroxide
formation is suspected. Concentrated peroxides are an explosion hazard. Also, peroxides are shock sensitive. Keep
MSDS Number: 15X015 AEROSOL LACQUER SANDING SEALER Printing Date: 04/26/2006 Page 3 of 5
containers upright to prevent leakage and tightly closed in a dry, cool and well-ventilated place.
Section 8 - Exposure Controls / Personal Protection
Component ACGIH TLV ACGIH STEL OSHA PEL OSHA STEL
ACETONE 500 ppm 750 ppm 750 ppm 1000 ppm
ISOBUTANE (2-METHYLPROPANE)N.E. N.E. N.E. N.E.
METHYL ETHYL KETONE 200 ppm 300 ppm 200 ppm 300 ppm
ODORLESS MINERAL SPIRITS N.E. N.E. N.E. N.E.
VM & P NAPHTHA 300 ppm N.E. 300 ppm 400 ppm
n-BUTYL ALCOHOL 20 ppm N.E. 50 ppm N.E.
n-BUTYL ACETATE 150 ppm 200 ppm 150 ppm N.E.
NITROCELLULOSE HAZARD - N.E. HAZARD - N.E. HAZARD - N.E. HAZARD - N.E.
ISOBUTYL ISOBUTYRATE N.E. N.E. N.E. N.E.
METHYL n-AMYL KETONE 50 ppm N.E. 100 ppm N.E.
2-BUTOXYETHANOL 25 ppm N.E. 25 ppm N.E.
ISOPROPANOL ANHYDROUS 400 ppm 500 ppm 400 ppm 500 ppm
XYLENE 100 ppm 150 ppm 100 ppm N.E.
METHYL ISOBUTYL KETONE 50 ppm 75 ppm 50 ppm 75 ppm
ETHYL BENZENE 100 ppm 125 ppm 100 ppm 125 ppm
ETHYL BENZENE 100 ppm 125 ppm 100 ppm 125 ppm
ISOBUTYL ALCOHOL 50 ppm N.E. 50 ppm N.E.
聽
Notes
ISOBUTANE (2-METHYLPROPANE) CAS# 75-28-5 - Manufacture recommends TLV of 1000 ppm.
ODORLESS MINERAL SPIRITS CAS# 8052-41-3 - NISOH recommends a limit of 350 mg/m3 - 8 hour TWA, 1800 mg/m3 as determined by a 15-minute sample.
n-BUTYL ALCOHOL CAS# 71-36-3, there is evidence that some hearing loss may occur from long-term repeated exposure to vapor concentrations that are greater
than 50 ppm. Animal studies have shown exposure causes effects on the liver, kidney, lungs, eyes, ears (vertigo), and central nervous system. Exposure caused birth
defects and is toxic to the fetus of animals at levels that are nontoxic to the pregnant animal. The animals were exposed to doses many times higher than are
expected to occur during use of the component.
n-BUTYL ACETATE CAS# 123-86-4 - This component has been shown to cause harm to the fetus in laboratory animals. It only caused harm at levels of
overexposure that would also harm the pregnant animal. The relevance to humans is unknown.
NITROCELLULOSE CAS# 9004-70-0 - It is on the OSHA Process Safety Management (PSM) list.
ISOBUTYL ISOBUTYRATE CAS# 97-85-8 - Eastman Kodak recommends an exposure limit of: 100 ppm 8 hour TWA.
2-BUTYOXYETHANOL CAS# 111-76-2 - This component has been shown to cause harm to the fetus in laboratory animals. It only caused harm at levels of
overexposure that would also harm the pregnant animal. It has been shown to cause cancer in laboratory animals. The relevance to humans is unknown. It also has
been shown to cause reversible kidney effects and reversible liver effects in laboratory animals. Congestion in the liver, kidneys, and lungs resulted from acute
lethal exposure in animal studies.
ISOPROPANOL ANHYDROUS CAS# 67-63-0 in animal studies, exposure has caused fetal developmental effects and low fetal weights in non-toxic exposure levels
to the mothers. It has been shown to cause fetotoxic effects at the level of exposure that was harmful to the mother. The relevance of these findings to humans is
unknown. Exposure has been shown to cause kidney damage in male rats. The mechanism of toxicity that caused the kidney damage is not found in humans;
therefore kidney damage from exposure is not expected to occur in humans.
XYLENE CAS# 1330-20-7 - In animal studies, exposure has caused birth defects. The relevance to humans is unknown. It also has been shown to cause reversible
effects to the liver, kidney damage, testis damage, harmful to fetuses, liver damage, hearing effects, central nervous effects, and cardiac sensitization in laboratory
animals.
ETHYL BENZENE CAS# 100-41-4 - IARC Group 2B possibly carcinogenic to humans.
ETHYL BENZENE CAS# 100-41-4 - IARC Group 2B possibly carcinogenic to humans.
聽
Engineering Controls: Local ventilation of emission sources may be necessary to maintain ambient concentrations below
permissible OSHA exposure limits. Remove all ignition sources (heat, sparks, flame, and hot surfaces).
Respiratory Protection: A respirator that is recommended or approved for use in an organic vapor environment (air
purifying or fresh air supplied) is necessary. Observe OSHA regulations for respirator use. Ventilation should be provided
to keep exposure levels below the OSHA permissible limits.
Skin Protection: Chemical-resistant gloves (neoprene, natural rubber) should be used to prevent skin contact.
Eye Protection: Wear safety eyewear (safety glasses, safety glasses with side-shields, chemical goggles, or face shields) to
prevent eye contact.
Other protective equipment: Safety shower and eyewash station should be located in immediate work area. Long sleeve
and long leg clothing is recommended. Remove and wash contaminated clothing before reuse or discard.
Hygienic Practices: Wash hands before breaks, eating, smoking, and at the end of the workday.
聽Section 9 - Physical and Chemical Properties
Boiling Range (掳F): N.D. - N.D. Vapor Density: Heavier than air
Odor: Solvent odor Odor Threshold: N.D.
Appearance: Amber liquid Evaporation Rate: 1.99 x n-Butyl Acetate
Solubility in H2O: Insoluble 聽 聽
Freeze Point: N.D. Specific Gravity: 0.780
Vapor Pressure: N.D. PH: N.A.
Physical State: Liquid in an aerosol container Viscosity: Thin liquid to heavy
viscous material
(See section 16 for abbreviation legend)
聽Section 10 - Stability and Reactivity
Conditions To Avoid: Avoid high temperatures, sparks, or open flames. Do not breathe vapors or spray mist.
MSDS Number: 15X015 AEROSOL LACQUER SANDING SEALER Printing Date: 04/26/2006 Page 4 of 5
Incompatibility: Material is incompatible with strong oxidizers, reducing agents, strong acids, chromic anhydride, chromyl
alcohol, hexachloromelamine, and hydrogen peroxide. Also, incompatible with permonosulfuric acid, chloroform, alkalis,
chlorine compounds, potassium t-butoxide, and thioglycol. Incompatible with copper, copper alloys, and strong alkalis.
Incompatible with halogens.
Hazardous Decomposition: Product may form hydrogen cyanide, methane, aldehydes, and carboxylic acids when burned.
Thermal decomposition can lead to the generation and release of gases and vapors including carbon monoxide, carbon
dioxide, oxides of nitrogen, and hydrocarbons.
Hazardous Polymerization: Will not occur.
Stability: Stable under recommended storage conditions, however one of the components may form peroxides of unknown
stability.
聽Section 11 - Toxicological Information
Product LD50: N.E. Product LC50: N.E.
Section 12 - Ecological Information
Ecological Information: No Information.
Section 13 - Disposal Information
Disposal Information: EPA Hazardous Waste Number/Code: D001, F003, F005. Empty containers will contain product
residue and flammable vapors. Handle as hazardous material. Do not incinerate closed containers. Hazardous Waste
Characteristics: Ignitability and Reactivity. RCRA HAZARDOUS WASTE CODE U161. Dispose of waste in accordance with
federal, state, and local environmental regulations.
Section 14 - Transportation Information
DOT Proper Shipping Name: Consumer Commodity Packing Group: N.A.
DOT Technical Name: N.A. Hazard Subclass: N.A.
DOT Hazard Class: ORM-D/Aerosol Resp. Guide Page: N.A.
DOT UN/NA Number: N.A. 聽 聽
Section 15 - Regulatory Information
聽
CERCLA 鈥? SARA Hazard Category
This product has been reviewed according to the EPA 鈥楬azard Categories鈥? promulgated under Sections 311and 312 of the
Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to
meet the following categories:聽 IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD
聽
SARA Section 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Component CAS Number Percent By Weight
METHYL ETHYL KETONE 78-93-3 12.93
n-BUTYL ALCOHOL 71-36-3 4.96
2-BUTOXYETHANOL 111-76-2 2.35
ISOPROPANOL ANHYDROUS 67-63-0 2.32
XYLENE 1330-20-7 1.65
METHYL ISOBUTYL KETONE 108-10-1 1.59
ETHYL BENZENE 100-41-4 0.22
ETHYL BENZENE 100-41-4 0.15
聽
Toxic Substances Control Act:
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported
from the United States:
Component CAS Number
METHYL ISOBUTYL KETONE 108-10-1
p-XYLENE OR PARA-XYLENE 106-42-3
聽
U.S. State Regulations: As follows 鈥?
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product.
None
聽
聽Pennsylvania Right-to-Know:
The following non-hazardous ingredients are present in the product at greater than 3%.
Component CAS Number
ALKYD RESIN UNKNOWN
聽
California Proposition 65:
MSDS Number: 15X015 AEROSOL LACQUER SANDING SEALER Printing Date: 04/26/2006 Page 5 of 5
Warning: The following ingredients present in the product are known to the state of California to cause Cancer:
Component CAS Number
ETHYL BENZENE 100-41-4
ETHYL BENZENE 100-41-4
BENZENE 71-43-2
ETHYLENE OXIDE 75-21-8
聽
Warning: The following ingredients present in the product are known to the state of California to cause birth defects, or
other reproductive hazards.
Component CAS Number
BENZENE 71-43-2
TOLUENE 108-88-3
ETHYLENE OXIDE 75-21-8
聽
International Regulations: As follows 鈥?
CANADIAN WHMIS:聽 This MSDS has been prepared in compliance with Controlled Product Regulations except for the
use of the 16 headings.
CANADIAN WHMIS CLASS: N.A.
Section 16 - Other Information
聽
HMIS Ratings: 聽 聽 聽
Health: 3 Flammability: 4 Reactivity: 1 Personal Protection: I
聽
VOLATILE ORGANIC COMPOUNDS, GR/LTR: 679.3
VOLATILE ORGANIC COMPOUNDS, LB/GAL: 5.67
VOLATILE ORGANIC COMPOUNDS MIXED, GR/LTR: <= N.D.
VOLATILE ORGANIC COMPOUNDS MIXED, LB/GAL: <= N.D.
REASON FOR REVISION: New Computer System. Information in Sections 2, 3, 5, 6, 7, 8, 10, 15, and 16 have been
updated.
REGULATORY CODE: 15X015
LAYOUT CODE: A2004R
Legend:聽 N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained on this MSDS has been checked and should be accurate.聽 However, it is the responsibility of the
user to comply with all Federal, State, and Local laws and regulations.
|