SILVERSHIELD
鈥? Using a soft paintbrush or roller, brush in one
DESCRIPTION
direction only. For spraying purposes, use an
airless spray gun as recommended by spray
Silvershield鈩? is a water-resistant bitumen based
equipment manufacturer.
coating containing minute flakes of pure aluminium,
鈥? Allow to dry for approximately 24 hours at 20潞C.
which produces a protective silver surface with a tough
PRECAUTIONS
bitumen barrier underneath.
USES
鈥? Do not use in association with strongly caustic or
acidic materials.
鈥? For the protection and preservation of metal and
鈥? Do not apply if the surface is too hot to touch.
bituminous roofing, metal structures, farm
鈥? Flammable. Store in dry place away from open
machinery and external surfaces of water tanks.
鈥? Galvanised iron with only moderate rusting may be fires, stoves and heaters. Keep lid firmly closed.
鈥? Intended for external use only, i.e. where it will be
protected for a substantial period with a liberal
application of Silvershield鈩?. expose to direct sunlight.
鈥? Ideal for applications in corrosive atmospheres, 鈥? For a full MSDS on Ormonoid Silvershield鈩? contact
marine situations and for water catchment roofs. your Davco Construction Materials state office.
鈥? Excellent as a protective finish for Ormonoid
COVERAGE
Waterproofing Putty, Brushable Waterproofer and
Malthoid Roofing.
Depending on application and porosity of the surface,
FEATURES AND BENEFITS
1 litre will cover approximately 8m2.
CLEAN UP
鈥? Easy to apply, brush it on direct from the can.
鈥? Water resistant bitumen properties, and U.V.
reflective aluminium flakes provide two layers of Use mineral turps to clean up excess Silvershield鈩?
protection in a single application. and tools.
鈥? Surface requires no priming enabling direct
PACKAGING
application on a wide variety of substrates from
metal gutters and downpipes to bituminous roofing.
鈥? When applied to roofing, can reduce the surface 1 litre, 4 litre and 20 litre metal tins.
temperature by up to 100C keeping you cooler in
TECHNICAL DATA
summer.
SURFACE PREPARATION
Properties:
Appearance: Silver-grey liquid with solvent odour
鈥? Surface must be dry, clean and free from grease,
UN Number: 1263
wax, oil and any loose or other material, which may
Dangerous Goods Class: 3
inhibit adhesion of the coating. Remove loose rust
Flash Point: 37 0C
and scale with a wire brush prior to application.
(Method Closed Cup)
New metal or bituminous roofing should be allowed
to weather for at least three months prior to Flammability Limits: Lower 0.9 (approx)
application. (%) Volume) Upper 7 (approx)
鈥? For roofs coated with bitumen, allow the surface to Specific Gravity @ 25 0C: 1.08
cure for at least seven to ten days prior to applying Thinning: Use mineral turps if required
the Ormonoid Silvershield鈩?.
Hazchem Code: 3[Y]
APPLICATION Toxicity: Poison S5
Packaging Group: III
鈥? Do not apply Silvershield鈩? on extremely hot days
when the surface is too 鈥渉ot to touch鈥?. Contents
must be stirred thoroughly before and during use to
avoid the aluminium flakes settling.
February 2002
SILVERSHIELD
DISCLAIMER
The use of this product is beyond the manufacturer鈥檚 control,
and liability is restricted to the replacement of material proven
faulty. The manufacturer is not responsible for any loss or
damage arising from incorrect usage. All workmanship must be
carried out in accordance with AS 3958.1 - 1991.
The information contained herein is to the best of our
knowledge true and accurate. No warranty is implied or given
as to its completeness or accuracy in describing the
performance or suitability of the product for a particular
application. Users are asked to check that the literature in their
possession is the latest issue.
February 2002
|