Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1330-20-7
78-83-1
79-93-2
127-18-4

File Name: pscoop_com_au---vmr.asp
                                         MOMAR                                                       Quality
thru
Research
AUSTRALIA PTY LTD
A.C.N. 003 149 111
QUICK IDENTIFIER (In Plant Common Name)

VMR
Material Safety Data Sheet (Vandal Mark Remover)

Momar Australia Pty Ltd Phone: 02 98314311
Unit 1, 6 Turbo Road Toll Free: 1800 267933
MARAYONG NSW 2148 Fax: 02 98312994

Date Prepared: 16th January 2003
Contact: Mark Moskow



U.N. Number: 2810 Class: 3 Flammable Liquid
Hazchem: 2Z Packaging Group: 111
EPG: 3A1 Poisons No.: S6


HAZARDOUS ACCORDING TO CRITERIA OF WORKSAFE AUSTRALIA

SECTION 1 - IDENTITY
Common Name: (used on label) VMR (Vandal Mark Remover)
Chemical Name: Not applicable Chemical Family: Solvent / surfactant blend
Formula: Solvent mixture - vandal mark remover

SECTION 2 - HAZARDOUS INGREDIENTS
Principal Hazardous Component(s) CAS No. % by Weight Threshold Limit Value (units)
(ACGIH-TWA) 435mg/m 3
1. Xylene 1330-20-7 50%
(LD 50 oral rats = 4300 mg/kg, LD 50 dermal rats = 500mg/kgH MOD, LC 50 inhalation rats = 6350ppm/4m)
(ACGIH-TWA) 980mg/m3
2. Isopropyl Alcohol 78-83-1 20
(LD 50 oral rats = 4000mg/kg, LD 50 dermal rats = 16400mg/kg, LC 50 inhalation rats = 1600ppm)
(ACGIH-TWA) 590mg/m3
3. Methylethylketone 79-93-2 >5
(LD 50 oral rats = 3400mg/kg, LD 50 dermal rats = 402mg/24H MLD, LC 50 inhalation rats = 2000ppm/4H)
(ACGIH-TWA) 335mg/m3
4. Perchloroethylene 127-18-4 >5
(LD 50 oral rats = 4000mg/kg, LD 50 dermal rats = 500mg/24 SEV, LC 50 inhalation rats = 4000ppm/4H)
SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS (Fire & Explosion Data)
Boiling Point: 100-300掳F (C) Specific Gravi ty: (H20=1) 0.890 Vapor Pressure: (mm Hg) 70 psig
Solubility Reactivity
Negligible in Water: None
in Water:
Clear colourless liquid - sweet ethereal odour
Appearance and Odour :
Flash 650掳 Flammable Limits Lower Upper Extingusher Water spray, CO2, Auto Ignition
Point (T.C.C.) In Air by Volume 4.5 10.5 Media dry chemical, alcohol foam Temp. : 600掳F
Special Fire Fighting Procedures: Water spray may be ineffective. Use water spray to keep fire
exposed container cool and to flush spills away from exposures. Fire fighters wear self contained
breathing apparatus with full face piece in pressure demand or other positive pressure mode.
Unusual Fire and Explosion Hazards: Aerosol container pressurised with flammable propellant. Do
not expose containers to temperatures above 130掳F or containers may explode.
VMR
SECTION 4 - PHYSICAL HAZARDS

Stability Unstable Conditions
镁 Heat, spark, open flame, welding areas.
Stable to Avoid
Aluminium, possibly sodium, magnesium and potassium, caustics, amines,
Incompatibility
ammonia, halogens, acids, strong oxidants.
(Materials to avoid)
Thermal degradation can result in emulsion of CO, CO2, HCL and
Hazardous
small amounts of phosgene and chloring.
Decomposition Products
Hazardous Conditions
Will Not Occur to Avoid NONE
Polymerization:
SECTION 5 - HEALTH HAZARDS
3
Threshold Limit Value 460mg/m (estimated)
Signs & Symptoms of Exposure
1. Acute Oversposure: Causes eye irritation. Ingestion may cause nausea, vomiting and diarrhea.
Excessive inhalation may casue dizziness, headache, anesthetic effect.
2. Chronic Overexposure: Respiratory irritation with resultant kidney and liver damage, nausea,
possible unconsciousness and even death under severe exposure. Prolonged or repeated frequent
contact with skin by removing natural oils may cause dermatitis.
None known
Medical Conditions Generally Aggravated by Exposure:
National Toxicology Yes 篓 Yes 篓 OSHA Yes 篓
Chemical Listed as Carcinogen I.A.R.C.
No 镁 No 镁 No 镁
or Potential Carcinogen Program Monographs
OSHA Permissable ACGIH Threshold Other Exposure
300mg/m3 (estimated)
Exposure Limit not est. not est.
Limit Value Limit Used
EMERGENCY AND FIRST AID PROCEDURES
1. Inhalation: Remove from over exposure to fresh air. If breathing is difficult or discomfort occurs,
obtain medial attention.
2. Eyes: Flush immediately with large amounts of water for at least 15 minutes.
If irritation persists, get medical attention.
3. Skin: Wash with soap and water. If irritation persists get medical attention.

4. Ingestion: Administer 2-4 oz of vegetable or olive oil and 1-2 oz activated charcoal.
Do not induce vomiting as gastric aspiration may occur. Get immediate medical attention.
SECTION 6 - SPECIAL PROTECTION INFORMATION
Respiratory Protection
NIOSH approved respirator above TLV.
(Specify Type):
sufficient
Ventilation Local Mechanical Special Other
keep below TLV Exhaust Adequate (General) Mechanical None None
Protective Eye
Not required Protection goggles as needed
Gloves
Other Protective
Clothing or Equipment: Not required
SECTION 7 - SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES
Precautions to be taken in Handling and Storage: Do not pucture or incinerate containers. Do not store
at temperatures above 130掳F.
Other Precautions: None
Steps to be taken in case material is Released or Spilled: If spilled absorb on mineral clay absorbent
material.
Waste Disposal Methods: Aerosol cans, when vented at a atmospheric pressure through normal
use, pose no hazard.
2
VMR




3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
pscoop_com_au---sammy_concentrated_algaecide.asp N/A
pscoop_com_au---sammy_concentrated_clarifier.asp N/A
pscoop_com_au---sammy_dry_acid.asp 7681-38-1
pscoop_com_au---sammy_ezy_chlor_tablets.asp 87-90-1 11113-50-1
pscoop_com_au---sammy_filter_cleaner.asp N/A
pscoop_com_au---sammy_granular_algaecide.asp 87-90-1
pscoop_com_au---sammy_granular_chlorine1.asp 7778-54-3
pscoop_com_au---sammy_liquid_chlorine.asp 7782-50-5 7732-18-5 7681-52-9
pscoop_com_au---sammy_pool_concentrated_clarifier.asp N/A
pscoop_com_au---sammy_spa_alkalinity_decreaser.asp 7681-38-1
pscoop_com_au---sammy_spa_sanitiser.asp 13840-33-0 7447-41-8 554-13-2 36355-96-1 1310-65-2 7732-18-5
pscoop_com_au---sammy_spa_shock.asp 10058-23-8 7778-80-5 7646-93-7 546-93-0
pscoop_com_au---sewercide.asp 1310-73-2 7429-90-5
pscoop_com_au---sika_firerate.asp N/A
pscoop_com_au---silvershield.asp N/A
pscoop_com_au---silver_brazing_flux.asp 7789-29-9
pscoop_com_au---sista_filling_foam.asp N/A
pscoop_com_au---solvent_cement_type_n_fast.asp N/A
pscoop_com_au---spakfilla_rapid.asp 50815-87-7 471-34-1 7732-18-5
pscoop_com_au---spot_marking_paint_-_yellow.asp N/A
pscoop_com_au---sugar_soap_powder.asp 497-19-8 10213-79-3
pscoop_com_au---supa_glue.asp 7085-85-0 9011-14-7
pscoop_com_au---threading_oil_msds.asp N/A
pscoop_com_au---ultrawhite.asp 7647-01-0 8001-54-5
pscoop_com_au---urethane_bond.asp 1330-20-7 108-65-6 4098-71-9 100-41-4
pscoop_com_au---vmr.asp 1330-20-7 78-83-1 79-93-2 127-18-4
pscoop_com_au---water_shield.asp 142-82-5 106-97-8 74-98-6 8052-41-3 1330-20-7 108-88-3 100-41-4
quikdry_water_removable_blockout.asp 67-63-0
qwiklift-htball-grades.asp 64742-65-0
qwik_com---msds_qwik-sf.asp N/A
ramset_co_nz---multi-nox_msds_doc_msds.asp 64742-52-5
redeyerpm_com---fullcure830verowhite-msds-051019.asp 22-41-4 5888-33-5 154608-99-8 87320-05-6
redeyerpm_com---msdsmodmat_p400abs_0904.asp 009003-56-9 008042-47-5 067701-27-3 000110-30-5
redeyerpm_com---msdsmodmat_pc_0404.asp 11121-39-3
redeyerpm_com---msdsmodmat_ppsf_0404.asp N/A
redeyerpm_com---msds_abs-m30imodel_108053a.asp 2008-01-1
redeyerpm_com---msds_abs-m30model_1071180b.asp 2007-05-3
redeyerpm_com---msds_fullcure720_model_051019.asp 22-41-4 5888-33-5 154608-99-8
redeyerpm_com---msds_fullcure840veroblue_model_051019.asp 22-41-4 5888-33-5 154608-99-8 87320-05-6
redeyerpm_com---msds_fullcure870veroblacke.asp 22-41-4 5888-33-5 154608-99-8 87320-05-6
redeyerpm_com---msds_fullcure950tangogray_model_051019.asp 5888-33-5 154608-99-8
redeyerpm_com---msds_fullcure970tangoblack_model_051019.asp 5888-33-5
redeyerpm_com---msds_pc-absmodel_1045890a.asp 100-42-5 2005-05-2
resource_invensys_com---mi_001-001.asp N/A
resource_invensys_com---mi_019-179.asp N/A
resource_invensys_com---msds_030_b.asp 063148-62-9
resource_invensys_com---msds_047.asp N/A
resource_invensys_com---msds_049.asp 7732-18-5 107-21-1 7447-40-7 7783-90-6
resource_invensys_com---msds_050.asp 7732-18-5 107-21-1 7447-40-7 7790-53-6 7601-54-9 7761-88-8
resource_invensys_com---msds_051.asp 7440-36-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC