Thursday, June 29, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Sudan Black
MSDS No.: LV504
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
0
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
0
Last Update: 2-7-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
J
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
4197255 Sudan Black
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
Avoid contact and inhalation.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Avoid contact and inhalation.
Signs and Symptoms:
Medical Conditions Generally Aggravated by Exposure:
Emergency and First Aid Procedures:
Thursday, June 29, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Sudan Black
MSDS No.: LV504
INHALATION: Remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
INGESTION: If swallowed, wash out mouth with water provided the person is conscious. Call a physician.
SKIN: Immediately wash skin with soap and copious water.
EYES: Flush eyes with copious amounts of water for at least 15 minutes.
Other Health Warnings:
Wash contaminated clothing before reuse.
This product is not listed as a carcinogen by OSHA, IARC or NTP
V. Fire Fighting Measures:
Flash Point: NA Lower Explosive Limit: NA Upper Explosive Limit: NA
F.P. Method:
Fire Extinguishing Media: Water spray, carbon dioxide, dry chemical or appropriate foam.
Special Fire Fighting Procedures:
Wear self contained breathing apparatus and protective clothing to prevent skin and eye contact.
Unusual Fire and Explosion:
Unusual fire and explosions hazards. Emits toxic fumes under fire conditions.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear respirator, chemical safety goggles, rubber boots and heavy rubber gloves. Sweep up, place in a bag and hold for waste
disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete
VII. Handling and Storage:
Precautions to be Taken:
SEE SECTION 8.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Mechanical exhaust required.
Personal Protective Equipment:
Chemical safety goggles, compatible chemical resistant gloves, NIOSH/MSHA-approved respirator, safety shower and eye bath.
Avoid inhalation, contact with eyes, skin and clothing. Avoid prolonger or repeated exposure. Wash thoroughly after handling.
Keep tightly closed. Store in a cool, dry place.
Thursday, June 29, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Sudan Black
MSDS No.: LV504
IX. Physical and Chemical Properties:
Boiling Point: NA Melting Point: 120C
Evaporation Rate (Butyl Acetate = 1): NA Vapor Pressure (mm Hg.): NA
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NA
Solubility In Water: NE Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable.
Incompatibility (Materials to Avoid):
Strong oxidizing agents.
Decomposition/By Products:
Toxic fumes of carbon monoxide, carbon dioxide, and nitrogen oxides.
Hazardous Polymerization:
None.
XI. Toxicological Information:
ACUTE EFFECTS:
May be harmful by inhalation, ingestion, or skin absorption. May cause eye and skin irritation.
Not listed as a carcinogen with OSHA, IARC or NTP
To the best of our knowledge, the chemical, physical and toxicological properties have not been thoroughly investigated.
XII. Ecological Information:
Data not yet available.
XIII. Disposal Considerations:
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and
scrubber. Observe all federal, state and local environmental regulations.
XIV. Transport Information:
Keep in closed container. Avoid incompatible materials. Use only in well-ventilated areas. Avoid dust generation and accumulation.
Wash thoroughly after handling.
XV. Regulatory Information:
TFE 13466 EPA TSCA Section 8 (B) Chemical Inventory.
XVI. Other Information:
Thursday, June 29, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Sudan Black
MSDS No.: LV504
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
Using this product under normal, properly instructed procedures should not be hazardous.
|