Monday, January 14, 2008
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: 3M Novec Engineered Fluid
MSDS No.: NS7100
I. Basic Information:
Contact: Not Available
Manufacturer: 3-M Company
Information Telephone Number: Not Available
Address: Not Available
Emergency Contact: Not Available
City, ST Zip: Not Available
Emergency Telephone Number: Not Available
Country:
Emergency Restrictions:
Product Name: 3M Novec Engineered Fluid
MSDS No.: NS7100
Issue Date: 2-21-2008
Supersedes Date: Not Available
II. Hazards Identification:
EMERGENCY OVERVIEW
Non-flammable. Non-toxic.
OSHA Regulatory Status
This material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Potential Health Effects
Route(s) of Entry:
Inhalation
Health Hazards (Acute and Chronic):
No known immediate health, physical or environmental hazard.
Signs and Symptoms:
EYES: Contact with eyes during use is not expected to result in significant irritation
INHALATION: If thermal decomposition occurs: Respiratory Effects: May include cough, sneezing,shortness of breath, chest tightness, nasal
discharge, and wheezing.
SKIN: Contact with skin during products is not expected to result in significant irritation.
INGESTION: No health effects expected.
Medical Conditions Generally Aggravated by Exposure:
None.
Other Health Warnings:
None.
Potential Environmental Effects
Not Available
III. Composition/Information on Ingredients:
Chemical Name CAS No. % Range Trade Secret
Non-hazardous components 0 Not Available
IV. First Aid Measures:
Emergency and First Aid Procedures:
EYES:No need for first aid is anticipated
INHALATION: If signs/symptoms develop, remove to fresh air. If signs/symptoms persist, contact a physician.
SKIN: No need for first aid is anticipated
INGESTION: No need for first aid is anticipated.
Note to Physicians:
If this product is used as indicated it is unlikely that any adverse health issues will occur.
Monday, January 14, 2008
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: 3M Novec Engineered Fluid
MSDS No.: NS7100
V. Fire Fighting Measures:
Suitable Extinguishing Media:
Mixture will not burn. No unusual effects are anticipated during fire fighting operations.
Unsuitable Extinguishing Media:
None known
Products of Combustion:
When fire fighting conditions are severe and total, thermal decomposition of this product is possible creating hydrogen flouride.
Protection of Firefighters:
Wear full protective clothing including helmet, self-contained breathing apparatus. Avoid breathing the products and substances that may result from
thermal decomposition. Keep containers cool with water spray to avoid rupture.
VI. Accidental Release Measures:
Personal Precautions:
Wear safety glasses/goggles.
Environmental Precautions:
Take precautuons to not release into the environment.
Methods for Containment:
Mix in sufficient absorbent until dry.
Methods for Cleanup:
Use inorganic absorbent material such as vermiculate or bentonite.
Other Information:
Ventilate area with fresh air.
VII. Handling and Storage:
Handling Precautions:
Normal warehouse storage.
Storage Precautions:
None specified.
VIII. Exposure Controls/Personal Protection:
Chemical Name OSHA PEL ACGIH TLV Other Limits
Non-hazardous components None None Not Available
Engineering Controls:
Use only with adequate ventilation.
Personal Protective Equipment:
Safety glasses/goggles, latex gloves.
IX. Physical and Chemical Properties:
Boiling Point: 61 C Melting Point: -135 C
Boiling Range: Not Available Freezing Point: Not Available
Solubility In Water: <12ppm Evaporation Rate (Butyl Acetate = 1): 49
Flash Point: N/A Flash Point Method: N/A
Monday, January 14, 2008
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: 3M Novec Engineered Fluid
MSDS No.: NS7100
Odor Threshold: Not Available Appearance and Odor: Clear, colorless. Slight ethereal odor.
Vapor Density (AIR = 1): 8.6 Air Vapor Pressure (mm Hg.): 202mmHg
pH Range: N/A Not Available
Partition Coefficient:
Not Available Auto-Ignition Temp: Not Available
Decomposition Temp:
Lower Explosive Limit: N/A Upper Explosive Limit: N/A
Specific Gravity (H20 = 1): Not Available
Not Available
Other Information:
X. Stability and Reactivity:
Stability:
Stable
Conditions to Avoid:
Not Available
Incompatible Materials:
Extreme heat may cause thermal decomposition. Avoid strong bases.
Hazardous Decomposition Products:
Decomposition of this product at temperatures above 300 C can form perfluoroisobutylene. No health hazard is associated with product use due to
PFIB exposure.
Possibility of Hazardous Reactions:
Will not occur.
XI. Toxicological Information:
Insignificant toxicity.
XII. Ecological Information:
This low solubility substance has insignificant toxicity to aquatic organisms.
XIII. Disposal Considerations:
Dispose of according to local, state, and federal regulations.
XIV. Transport Information:
Shipping Name: Not Available
DOT Hazard Class: Not Available DOT Subsidiary Hazard Class: Not Available
UN/NA#: Not Available Not Available
Packing Group:
Transportation Information:
Not regulated for all forms of transport.
XV. Regulatory Information:
The components of this product are in compliance with the chemical notification requirements of TSCA.
Monday, January 14, 2008
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: 3M Novec Engineered Fluid
MSDS No.: NS7100
XVI. Other Information:
Liquid Gas Solid
Chemical State: X
Pure Mixture
Chemical Type: 0
X
Hazard Category: 0 0
Acute Chronic Fire
Pressure Reactive
Additional Manufacturer Warnings:
The information above is believed to be accurate and represents the best 0
information currently available to us. However, we make no warranty of
0
merchantability or any other warranty, expressed or implied, with respect to
such information, and we assume no liability resulting from its use. Users
0
should make their own investigation to determine the suitability of the
information for their particular purposes. B
Additional Product Information:
Using this product under normal, properly instructed procedures should not be hazardous.
|