Monday, May 22, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Powder Foam-Away
MSDS No.: PC100
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
0
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 1
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
0
Last Update: 2-25-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
A
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
111762 2-Butoxyethanol 1.0-5.0 25 ppm 25 ppm
N/D All Purpose Spray Cleaner >75
75285 Isobutane 1.0-10.0 1,000 ppm 1,000 ppm
74986 Propane 1.0-10.0 1,000 ppm 1,000 ppm -156 F
III. Hazardous Identification:
Hazard Category:
X Acute Chronic Fire X Pressure Reactive
Hazardous Identification Information:
Respiratory and digestive tract irritant. Skin and eye irritant.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Signs and Symptoms:
Inhalation: Dizziness, nausea, headache
Ingestion: Nausea, vomiting, diarrhea
Eyes: Redness, tearing
Medical Conditions Generally Aggravated by Exposure:
Monday, May 22, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Powder Foam-Away
MSDS No.: PC100
Skin, eye, respiratory diseases
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Get medical attention.
Ingestion: Call a Poison Control Center. If victim is conscious and alert, give 2-4 cups water. (Never give anything by mouth to
an unconscious person!) Induce vomiting. Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention if
condition warrants.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid
immediately. Do not allow victim to rub or keep eyes closed.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Water, foam, carbon dioxide, dry chemical
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. Cool fire-exposed containers with water fog.
Unusual Fire and Explosion:
Exposure to temperatures above 120 F may cause containers to burst.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Soak up with
inert absorbent material (do not use flammable substances such as sawdust). Ventilate spill site after collection. Dispose
according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Store below 120 F. Avoid ignition sources (heat, open flame, spark). Avoid
incompatible materials. Use only in well-ventilated areas. Wash thoroughly after handling.
Other Precautions:
DO NOT puncture or incinerate container.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles
Monday, May 22, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Powder Foam-Away
MSDS No.: PC100
IX. Physical and Chemical Properties:
Boiling Point: 212 F Melting Point: NE
Evaporation Rate (Butyl Acetate = 1): >1.0 Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NE
Solubility In Water: Soluble Appearance and Odor:
Other Information: * Appearance & Odor: Clear, colorless liquid; pleasant lemon fragrance
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Ignition sources (heat, open flame, spark)
Decomposition/By Products:
Oxides of carbon
Hazardous Polymerization:
Will not occur.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations. Dispose of empty containers in non-incinerated trash only.
XIV. Transport Information:
Keep in tightly closed container. Keep cool and dry. Transport below 120 F. Avoid ignition sources (heat, open flame, spark).
Avoid incompatible materials. Wash thoroughly after handling.
IATA
Shipping name: Aerosols, non-flammable
Hazard class: 2.2
UN no.: 1950
Non-flammable gas
XV. Regulatory Information:
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
Monday, May 22, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Powder Foam-Away
MSDS No.: PC100
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|