Monday, May 22, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Ninhydrin Powder Crystals
MSDS No.: NRP01
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
1
Last Update: 2-21-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
F
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
485472 Ninhydrin 100 NE NE 255 C
III. Hazardous Identification:
Hazard Category:
X Acute Chronic Fire Pressure Reactive
Hazardous Identification Information:
Harmful if swallowed. Respiratory system irritant. Skin and eye irritant.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Harmful if swallowed. Respiratory system irritant. Skin and eye irritant.
Signs and Symptoms:
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory system diseases
Emergency and First Aid Procedures:
Monday, May 22, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Ninhydrin Powder Crystals
MSDS No.: NRP01
Inhalation: Remove to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen (To be
administered by qualified medical personnel only!) Keep victim at rest and warm. Get medical attention.
Ingestion: If victim is conscious and alert, wash mouth out with water and give plenty of water to drink. (Never give anything by
mouth to an unconscious person!) Get medical attention immediately.
Skin: Flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing. Seek medical attention if
conditions warrant.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Do not allow victim to
rub or keep eyes closed. Get medical aid immediately.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Use proper extinguishing media suitable for surrounding fire.
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Cover with inert absorbent material (sand or earth recommended; do
not use flammable substances such as sawdust). Sweep up and place in bag or vacuum up with proper filter equipped instrument.
Avoid creating dust. Ventilate and wash spill site after collection. Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Store at room temperature (15-25 C recommended). Protect from direct sunlight and moisture. Avoid
incompatible materials. Use only in well-ventilated areas. Avoid dust generation and accumulation. Wash thoroughly after
handling.
Other Precautions:
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged and then disposed of according to local, state, and federal regulations.
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, rubber or plastic gloves, dust respirator, protective clothing
Monday, May 22, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Ninhydrin Powder Crystals
MSDS No.: NRP01
IX. Physical and Chemical Properties:
Boiling Point: NE Melting Point: 255 C
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NE
Solubility In Water: Soluble Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Oxidizing agents, sunlight, moisture
Decomposition/By Products:
Hazardous Polymerization:
Has not been reported.
XI. Toxicological Information:
The chemical, physical, and toxicological properties of have not been thoroughly investigated.
XII. Ecological Information:
Do not allow to enter drinking water supplies, waste water, or soil. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Store at room temperature (15-25 C recommended). Protect from direct sunlight and moisture. Avoid
incompatible materials. Avoid dust generation and accumulation. Wash thoroughly after handling.
XV. Regulatory Information:
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Monday, May 22, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Ninhydrin Powder Crystals
MSDS No.: NRP01
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|