MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: SEALANT 11
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
1. General Notes
This formulation is a trade secret and considered confidential and proprietary information of Team, Inc.
UND = Undetermined
NA = Not Applicable
2. Product Information
Product Part Number / Name: 800-0007 / SEALANT 11
Chemical Family: Inorganic Alkaline Salt
Product Use: Industrial Leak Sealant
Product Description: Inorganic Sealant
3. Hazardous Ingredients OSHA ACGIH OSHA ACGIH
PEL TLV PEL TLV Possible
Compound CAS Number Percent (mg/m3) (mg/m3) (ppm) (ppm) Carcinogen
quartz 14808-60-7 25 - 50 10 0.05 250 yes
aluminum oxide 1344-28-1 5 - 10 15 10
Notes
4. Physical Data
Boiling Point (F): 212 Specific Gravity (H20 = 1): 1.35
Vapor Pressure (mm Hg): 23 / 75 F Melting Point (F): UND.
Solubility in H20: Dispersible Evaporation Rate (Butyl Acetate = 1): 1
Appearance and Odor: Odorless, grey paste.
5. Fire and Explosion Hazard Information
Flash Point (Closed Cup) (F): > 302
Flammability Limits in Air (%): Low: UND. High: UND.
Extinguishing Media: Water or chemical type extinguisher.
Special Fire Fighting Procedures: None known.
Unusual Fire and Explosion None known.
Page 1 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: SEALANT 11
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
6. Reactivity Data
Stability: Stable.
Conditions to Avoid: Evaporative drying.
Materials to Avoid: None known.
Hazardous Decomposition Products: None known.
Hazardous Polymerization: Will not occur.
7. Health Hazards
Routes of Entry:
Inhalation: Yes
Skin: Yes
Eyes: Yes
Ingestion: Yes
Acute Symtoms:
Inhalation: May cause irritation to the mucous membrane of throat and respiratory
tract.
Skin: Repeated or prolonged exposure may cause irritation.
Eyes: May cause irritation and in extreme cases, possibly blindness.
Ingestion: Mild alkali - May cause irritation to the gasterol-intestinal tract.
Carcinogenicity:
National Toxicology Yes
IARC Monographs: Yes
OSHA Regulated: Yes
Chronic Symptoms: Repeated or prolonged exposure may result in accumulation of toxins to
cause illness to the body and possibly death.
Page 2 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: SEALANT 11
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
Medical Conditions Aggravated: None known.
1st Aid Procedures:
Inhalation: Immediately remove from contaminated area to fresh air. Keep individual
quiet. In case of respiratory distress, give oxygen or give artificial
respiration. Obtain medical attention.
Skin: Thoroughly wash affected area with soap and water. Flush area with
water for 15 minutes. If irritation develops, obtain medical attention.
Eyes: Flush with low pressure water for at least 15 minutes. If irritation
develops, obtain medical attention.
Ingestion: Induce vomiting. Promptly initiate gastric lavage or stomach pump. Obtain
medical attention.
8. Safe Handling / Disposal / Use
Releases or Spills: Sweep or pick up with industrial vacuum. Place in container for disposal.
If needed, clean with alcohol or acetone.
Disposal: Landfill or incinerate in accordance with federal, state, and local
regulations.
Ventilation: Use adequate ventilation.
Other Storage Precautions: Keep away from open flames.
9. Control Measures
Respiratory Protection: If ventilation is poor, a caustic vapor respirator is recommended.
Ventilation: Local exhaust is usually adequate. If necessary use mechanical exhaust.
Hand Protection: Caustic resistant gloves recommended.
Eye Protection: Safety goggles or glasses.
Other: Acid suits or aprons.
Hygienic Practices: Wash hands with soap and water.
Page 3 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: SEALANT 11
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
10. Hazard Ratings
NFPA
Health: 2
Flammability: 0
Reactivity: 0
11. Additional Information
This data is offered in good faith as typical values and not as a product specification. No warranty, is
either expressed or implied. The recommended handling procedures are believed to be generally
applicable. However, each user should review these recommendations in the specific context of the
intended use.
End of Document
Page 4 of 4
|