MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: S-190
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
1. General Notes
This formulation is a trade secret and considered confidential and proprietary information of Team, Inc.
UND = Undetermined
NA = Not Applicable
2. Product Information
Product Part Number / Name: 900-0028 / S-190
Chemical Family: Silicone Resin
Product Use: Industrial Leak Sealant
Product Description: Fibrous Resin Mixture
3. Hazardous Ingredients OSHA ACGIH OSHA ACGIH
PEL TLV PEL TLV Possible
Compound CAS Number Percent (mg/m3) (mg/m3) (ppm) (ppm) Carcinogen
graphite 7782-42-5 10 - 25 15 2
toluene 108-88-3 10 - 25 200 50
aluminum oxide 1344-28-1 10 - 25 15 10
quartz 14808-60-7 10 - 25 10 0.05 250 yes
quartz 14808-60-7 >1 10 0.05 250 yes
carbon fiber 7782-42-5 >1 2 15
carbon fiber 7782-42-5 >1 2 15
quartz 14808-60-7 >0.1 10 0.05 250 yes
Notes
4. Physical Data
Boiling Point (F): 230 Specific Gravity (H20 = 1): 0.9
Vapor Pressure (mm Hg): 6 / 68 F Melting Point (F): UND.
Solubility in H20: Negligible Evaporation Rate (Butyl Acetate = 1): 1
Appearance and Odor: Black pliable semi-solid with solvent odor.
Page 1 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: S-190
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
5. Fire and Explosion Hazard Information
Flash Point (Closed Cup) (F): 205
Flammability Limits in Air (%): Low: 1.2 High: 7.0
Extinguishing Media: Water or chemical type extinguisher.
Special Fire Fighting Procedures: None known.
Unusual Fire and Explosion None known.
6. Reactivity Data
Stability: Stable.
Conditions to Avoid: Keep away from open flame.
Materials to Avoid: None known.
Hazardous Decomposition Products: CO, CO2 and SiO2
Hazardous Polymerization: Will not occur.
7. Health Hazards
Routes of Entry:
Inhalation: Yes
Skin: Yes
Eyes: Yes
Ingestion: Yes
Acute Symtoms:
Inhalation: May cause irritation to the mucous membrane of throat and respiratory
tract.
Skin: Repeated or prolonged exposure may cause irritation.
Eyes: May cause irritation and in extreme cases, possibly blindness.
Page 2 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: S-190
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
Ingestion: May cause dizziness, unconsciousness, CNS disorder (headache,
nausea, vomiting) and if ingested in large quantities, possibly death.
Carcinogenicity:
National Toxicology Yes
IARC Monographs: Yes
OSHA Regulated: Yes
Chronic Symptoms: Repeated or prolonged exposure may result in accumulation of toxins to
cause illness to the body and possibly death. Target organs are CNS,
kidneys, pancreas, lungs, eyes, skin and respiratory tract.
Medical Conditions Aggravated: None known.
1st Aid Procedures:
Inhalation: Immediately remove from contaminated area to fresh air. Keep individual
quiet. In case of respiratory distress, give oxygen or give artificial
respiration. Obtain medical attention.
Skin: Thoroughly wash affected area with soap and water. Flush area with
water for 15 minutes. If irritation develops, obtain medical attention.
Eyes: Flush with water for at least 15 minutes. If irritation develops, obtain
medical attention.
Ingestion: Do not induce vomiting. Obtain medical attention.
8. Safe Handling / Disposal / Use
Releases or Spills: Sweep or pick up with industrial vacuum. Place in container for disposal.
If needed, clean with alcohol or acetone.
Disposal: Landfill or incinerate in accordance with federal, state, and local
regulations.
Ventilation: Use adequate ventilation.
Other Storage Precautions: Keep away from open flames. Avoid prolonged contact with skin.
9. Control Measures
Respiratory Protection: If ventilation is poor, an organic vapor respirator is recommended.
Page 3 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: S-190
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
Ventilation: Local exhaust is usually adequate. If necessary use mechanical exhaust.
Hand Protection: Hydrocarbon resistant gloves recommended.
Eye Protection: Safety goggles or glasses.
Other: Other equipment as necessary.
Hygienic Practices: Wash hands with soap and water.
10. Hazard Ratings
NFPA
Health: 2
Flammability: 2
Reactivity: 0
11. Additional Information
This data is offered in good faith as typical values and not as a product specification. No warranty, is
either expressed or implied. The recommended handling procedures are believed to be generally
applicable. However, each user should review these recommendations in the specific context of the
intended use.
End of Document
Page 4 of 4
|