SensoriC
Material Safety Data Sheets
Sensors containing hydrous electrolytes
Rev. 09/2006
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 1
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
1. PRODUCT IDENTIFICATION:
Electrochemical gas sensors containing hydrous electrolyte
Product names:
Cl2 3E 50, NH3 3E 100 SE, NH3 3E 1000 SE, HF 3E 10 SE, NO2 3E 50
2. MANUFACTURER:
SensoriC Gas Sensors a Division of MST Technology GmbH
Justus-von-Liebig Str. 22
53121 Bonn Germany
Phone: ++49 (0)228 52 66 40
Fax: ++49 (0)228 62 40 76
Rev. 09/2006
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 2
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
3. COMPOSITION / INFORMATION ON INGREDIENTS:
ABS plastic housings, proprietary noble metal catalyst electrodes, halogen free organic solvents,
acrylamide (Cl2 and NO2 sensors), inorganic non toxic salts
4. HAZARDS IDENTIFICATION:
The product is considered to be non 鈥? hazardous. The electrolyte inside the sensor constitutes the main
potential hazard. This may leak out should the housing be damaged or tampered with.
4.1. Inhalation of electrolyte:
Inhalation is not an expected hazard unless heated to high temperatures. Harmful if inhaled.
4.2. Ingestion electrolyte:
Harmful if swallowed. Ingestion of Cl2 and NO2 electrolyte may cause nervous system disturbances.
4.3. Skin or eye contact of electrolyte:
May cause skin irritation.
4.4. Aggravation of pre-existing conditions:
Persons with pre-existing skin disorders, eye problems or central or peripheral nervous system conditions
may be more susceptible to the effects of this substance
4.5. Chronic health hazards:
Prolonged or repeated exposure to Cl2 and NO2 electrolyte may casue reproductive disorders and /or
Rev. 09/2006
cancer. Risk of cancer depends on level and duration of exposure.
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 3
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
5. FIRST AID MEASURES:
In case of leakage and:
5.1. Eye contact with electrolyte:
Irrigate thoroughly with water for at least 15 minutes. Obtain medical advice.
5.2. Inhalation of electrolyte:
Remove to fresh air. Rest and keep warm. Obtain medical advice if applicable.
5.3. Skin contact with electrolyte:
Immediately flush the skin thoroughly with soap and copios amounts of water for at least 15 minutes.
Remove contaminated clothing and wash before re-use. Obtain medical advice if continued irritation.
5.4. Ingestion of electrolyte:
If swallowed DO NOT INDUCE VOMITING. Wash out mouth thoroughly with water and give
plenty of water to drink. Obtain medical advice.
6. FIRE FIGHTING MEASURES:
6.1. Fire:
Not considered to be a fire hazard.
6.2. Explosion:
Not considered to be an explosion hazard.
Rev. 09/2006
6.3. Fire extinguishing media:
Use any means suitable for extinguishing surrounding fire.
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 4
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
7. ACCIDENTIAL RELEASE MEASURES:
Damage
Should any SensoriC gas sensor be so severely damaged or tampered with that the leakage of the
contents occurs then the following procedures should be adopted:
鈥void skin contact with any liquid or internal component through the use of protective
gloves.
鈥isconnect SensoriC gas sensor if it is attached to any equipment.
鈥se copious amounts of clean water to wash away any spilt electrolyte, particularly
important in equipment because of the corrosive nature of the electrolyte.
鈥bserve first aid measures in case of eye contact, inhalation, skin contact or ingestion of
electrolyte.
8. HANDLING and STORAGE:
Must not be exposed to temperatures outside the range specified on the specification sheet.
Should not be exposed to organic vapors, which may cause physical damage to the body of the
sensor.
Must not be stored in areas containing organic solvents or in flammable liquid stores.
9. EXPOSURE CONTROLS / PERSONAL PROTECTION:
Rev. 09/2006
None in normal operation
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 5
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
10. PHYSICAL and CHEMICAL PROPERTIES:
鈥? Colour coded sensors in plastic housing with connection pins or flying leads.
鈥? Sensor is a sealed unit
11. STABILITY and REACTIVITY:
Non applicable.
12. TOXICOLOGICAL INFORMATION:
To the best manufacturer麓s knowledge, the toxicological properties have not been thoroughly investigated.
13. DISPOSAL CONSIDERATIONS:
Contains toxic compounds irrespective of physical condition. Should be disposed of according to
local waste management requirements and environmental legislation.
Should not be burnt since they may evolve toxic fumes.
Rev. 09/2006
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 6
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
SensoriC MSDS - hydrous
14. TRANSPORT REGULATIONS
SensoriC gas sensors are classified under UN 2800 (batteries - Wet non-spillable) and conform to the
special provisions, section 4.5 paragraph A67 of the dangerous goods regulations. As such
SensoriC gas sensors are classed as non-dangerous and may be transported without special
packing, labels etc. It is important, however, to check any local regulations.
15. REGULATORY INFORMATION:
Non applicable
Rev. 09/2006
SensoriC deems the data contained herein as factual, and the opinions expressed are those of qualified experts based on the results of tests conducted.
The above data can not be used as a warranty provision or representation for which SensoriC assumes legal responsibility. The data are offered solely
for consideration, investigation and verification. Any use of this information is subject to federal, state and local laws and regulations.
SensoriC Sensors are designed and manufactured in
Justus-von-Liebig-Str. 22, D- 53121 Bonn, Germany 7
Tel: ++49 (0) 228 52 66 40 Fax: ++49 (0) 228 5266439
|