Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: unifrax_com_au---isofrax_blanket.asp
                                                                       Product Information Sheet


Isofrax鈩? 1260C Blanket
Introduction
Isofrax鈩? Thermal Insulation from Unifrax is a revolutionary new
fibre that utilizes a unique, patented silica-magnesia chemistry
to solve a variety of demanding, high temperature application
problems. Isofrax 1260C Blanket is the product of a long-term
research and development effort by Unifrax to produce an
insulating blanket which has the high temperature performance
characteristics required in many applications at temperatures up
to 1260掳C/2300掳F and also meets European regulatory require-
ments (Directive 97/69/EC). Isofrax 1260C Blanket provides:
鈥? Low thermal conductivity
鈥? Required handling strength
鈥? Excellent thermal stability
鈥? Low heat storage
鈥? Thermal shock resistance
鈥? Flexibility
鈥? Low weight
鈥? Excellent corrosion resistance
Isofrax 1260C Blanket has excellent chemical stability
and is unaffected by most chemicals except hydrofluoric and Typical Product Properties
phosphoric acids and concentrated alkalies. If wet by water or
Colour Bluish White
steam, thermal and physical properties remain unaffected after
Melting Point >1500掳C (2730掳F)
drying. Isofrax 1260C Blanket also provides superior resistance
Temperature Grade 1260掳C (2300掳F)
to attack from molten aluminum alloys at high temperatures.
Recommended Operating Temperature1 1260掳C (2300掳F)
Product Forms 2.54 g/cm3
Specific Gravity
Isofrax 1260C Blanket is an inorganic, needled insulating
Isofrax 1260C Blanket has a temperature rating of 1260掳C,
blanket which is manufactured using Isofrax 1260C spun
but can withstand short-term temperature excursions above
fibres. The extra long spun fibres, cross-locked through
1260掳C with moderate shrinkage. The enhanced thermal
a unique forming process, produce a blanket with good
handling strength. The following table summarizes the stability of Isofrax 1260C Blanket provides a safety margin
standard sizes available for Isofrax 1260C Blanket: in the event of a furnace control malfunction or burner failure.
This safety margin helps to avoid furnace hot spots and equip-
13 (1鈦?2), 25 (1), 38 (1.5), 50 (2)
Thickness 鈥? mm(in)
ment damage resulting from temperature overruns. The follow-
Density kg/m3 鈥? (pcf) 96 (6), 128 (8)
ing graph compares the shrinkage characteristics of Isofrax
Width 鈥? mm(in) 610 (24), 1220 (48)
1260C Blanket with other high temperature insulating materials.
Roll length 鈥? mm(ft) 3660(12), 7320 (24)

Applications Thermal Shrinkage
Isofrax 1260C Blanket provides solutions to a variety of (25mm (1z), 128 kg/m3 (8 pcf Blanket))
heat processing problems. These typical applications include: 10
鈥? Removable insulating blankets for weld stress relieving
鈥? Reusable insulation for steam and gas turbines
8
鈥? High temperature kiln and furnace insulation
% Linear Shrinkage (24 hrs)




鈥? Furnace door linings and seals
Isofrax鈩?
鈥? Furnace Repairs 6
鈥? Boiler and incinerator linings Fiberfrax庐
鈥? Seals and gaskets Insulfrax鈩?
4
鈥? Automotive heat shields
Mineral Wool
鈥? Appliance insulation
鈥? Fire protection 2
鈥? Duct, stack and flue linings
鈥? Vessel covers and lids
0
鈥? Personnel heat shields 掳C 800 1200 1400
1000 1260
鈥? Molten metal splash protection 掳F 1472 2192 2552
1832 2300
Temperature
Refer to the product Material Safety Data Sheet (MSDS) for
recommended work practices and other product safety information.
Typical Product Parameters
Isofrax 1260C Blanket is produced on the Unifrax Corporation鈥檚
SEF furnaces which utilize proprietary mechanical spinning
and needling processes, along with the latest process control
technology. Use of this state-of-the-art manufacturing process
results in the following product parameters for Isofrax 1260C
Blanket:
Parameter Isofrax 1260C Blanket Isofrax 1260C Blanket
3
128 kg/m3 (8 pcf)
Density 96 kg/m (6 pcf)
Chemical Analysis (%) SiO2 鈥? 72 to 77 SiO2 鈥? 72 to 77
MgO 鈥? 19 to 26 MgO 鈥? 19 to 26
Trace Elements 鈥? 0 to 4 Trace Elements 鈥? 0 to 4
Average Fibre Diameter (microns) 3.0 to 5.0 3.0 to 5.0
Average Tensile Strength 35 kPa (5 psi) 42 kPa (6 psi)
(ASTM 686-76)
Compression Recovery (%)
@ 10% Compression: 96% Recovery
@ 30% Compression: 89% Recovery
@ 50% Compression: 78% Recovery

For additional information about product performance or to identify
the recommended product for your application, please contact the
Unifrax Application Engineering Group at 716-278-3899.
Data are average results of tests conducted under standard
procedures and are subject to variation. Results should not
be used for specification purposes.

Insulating Value
The following table summarizes the insulating character-
istics of Isofrax 1260C Blanket (assumes 128 kg/m3
(8 pcf) density):
Insulation Thickness 25mm (1z) 51mm (2z) 102mm (4z) 203mm (8z) 254mm (10z)
Hot Face Cold Face (掳C/掳F) (掳C/掳F) (掳C/掳F) (掳C/掳F) (掳C/掳F)
650掳C (1202掳F) (171/340) (119/246) (82/181) (59/138) (53/128)
870掳C (1598掳F) (248/479) (174/346) (119/247) (82/180) (73/164)
1100掳C (2012掳F) (338/640) (243/470) (168/335) (114/238) (101/214)
All heat flow calculations are based on a surface emissivity factor of 0.90, an ambient temperature of 27掳C (80掳F) and
0 km/h (mph) wind velocity, unless otherwise stated.

Health and Safety Information Notes:
(1) The recommended operating temperature of Isofrax
Isofrax Thermal Insulation from Unifrax, according to
1260C Blanket is determined by irreversible linear change
Directive 97/69/EC, possesses a fibre chemistry within the
criteria, not melting point.
regulatory definition of a 鈥渕an-made vitreous (silicate) fibre
with random orientation with alkaline oxide and alkaline earth
oxide content greater than 18% by weight.鈥? Isofrax fibres have
been tested pursuant to EU protocol ECB/TM/26, Revision 7,
Nota Q, Directive 97/69/EC, with results that are below
regulatory thresholds. As a result, Isofrax Thermal Insulation
does not require additional labeling or further testing. In
addition, Intratracheal Instillation Biopersistance Testing per
the German Hazardous Substance Ordinance has been con-
ducted on Isofrax fibres with results that are below regulatory
thresholds. Refer to the product Material Safety Data Sheet
(MSDS) for recommended work practices and other product
safety information.




Form C-1452 English Unifrax Corporation Unifrax GmbH
Effective 11/99
Corporate Headquarters Hanns-Martin-Schleyer-Str. 30
漏1999, Unifrax Corporation
All Rights Reserved 2351 Whirlpool Street 47877 Willich, Germany
Printed in USA
Niagara Falls, New York 14305-2413 Telephone: 49-2154-94780
Page 2 of 2
Telephone: 716-278-3800 Telefax: 49-2154-947810
Data are average results of tests conducted under standard procedures and are subject
to variation. Results should not be used for specification purposes. The following are trade- Telefax: 716-278-3900 Web Address: www.unifrax.com
marks of Unifrax Corporation: Isofrax鈩? Thermal Insulation, Insulfrax鈩?, Fiberfrax庐
Web Address: www.unifrax.com Email: info@unifrax.com
Email: info@unifrax.com

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
sti_fmpdata_net---msds-sss.asp N/A
sti_fmpdata_net---msds-wf300.asp N/A
sti_fmpdata_net---msds_le600_sealant.asp N/A
sti_fmpdata_net---msds_red2.asp N/A
ta-4900_-__cleanroom_topical_antistat_msds_sheet.asp 67-63-0 7732-18-5
tkinet_com---ammonium_bisulfite.asp 10192-30-0 7732-18-5
tkinet_com---ammonium_polysulfide.asp 12259-92-6 1336-21-6 7732-18-5
tkinet_com---ammonium_sulfide.asp 12135-76-1 7732-18-5
tkinet_com---ammonium_thiosulfate.asp 7783-18-8 7783-20-2 10196-04-0 7732-18-5
tkinet_com---calcium_polysulfide.asp 1344-81-6 7732-18-5
tkinet_com---calcium_thiosulfate.asp 10124-41-1 7732-18-5
tkinet_com---cyntrol2040.asp 12259-92-6 1336-21-6 7732-18-5
tkinet_com---kts.asp 10294-66-3 7732-18-5
tkinet_com---magnesium-thiosulfate.asp 10124-53-5 7732-18-5
tkinet_com---nitro-sul_20-40s.asp 12259-92-6 1336-21-6 7732-18-5
tkinet_com---nzn-15-0-0.asp 57-13-6 7779-88-6
tkinet_com---trisert-13-3-4.asp N/A
tkinet_com---trisert-k_5-0-20.asp N/A
tkinet_com---trisert-vg-9-6-8.asp N/A
tkinet_com---trisert-vgn.asp N/A
tkinet_com---trisert_ks_15-0-12-8s.asp N/A
tkinet_com---trisert_nb-26-0-0.asp N/A
tkinet_com---urea_triazone_fertilizer__nsure.asp 57-13-6 7732-18-5
toyobo_co_jp---dia_amy.asp N/A
toyobo_co_jp---dia_inurin.asp N/A
toyobo_co_jp---dia_p-amy.asp N/A
toyobo_co_jp---dia_tg-s.asp N/A
toyobo_co_jp---msds.asp 60857-81-0
toyobo_co_jp---msds_e_procon.asp 25212-74-2
toyobo_co_jp---msds_p84.asp N/A
toyobo_co_jp---msds_procon.asp 25212-74-2
unifrax_com_au---fiberfrax_duraflex.asp N/A
unifrax_com_au---fiberfrax_lo-con_felts.asp N/A
unifrax_com_au---fibermax_17r.asp N/A
unifrax_com_au---foamfrax_binder_b.asp N/A
unifrax_com_au---fyrewrap_msds.asp N/A
unifrax_com_au---isofrax_blanket.asp N/A
unifrax_com_au---isofrax_bulk_fiber.asp N/A
unifrax_com_au---isofrax_paper.asp N/A
unifrax_com_au---xpe_paper_av.asp N/A
unifrax_com_au---xpe_paper_nv.asp N/A
us_coloplast_com---2pc_non-filter_msds.asp 13463-67-7 64754-90-1 24937-78-8 9002-85-1 8013-07-5 9003-07-0 9002-88-4 25038-54-4
us_coloplast_com---assura_ac_90mm_msds.asp 9002-88-4 24937-78-8 26221-73-8 9003-07-0
us_coloplast_com---conveendripcollectormsds.asp N/A
us_coloplast_com---conveennet_pantsmsds.asp N/A
us_coloplast_com---convex_light_msds.asp 9002-88-4 9002-85-1 24937-78-8 75-01-4 9003-07-0 75-35-4 73138-44-0 8013-07-8 102-23-1
us_coloplast_com---easiclose_non-filter_msds.asp 64754-90-1 24937-78-8 9002-85-1 8013-07-8 25038-59-9 9002-88-4 9009-54-5 9003-07-0
us_coloplast_com---isagel_70_msds_updated__fre.asp 64-17-5
us_coloplast_com---isagel_fr_msds.asp 64-17-5
us_coloplast_com---oadmsds.asp 67-63-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC