MATERIAL SAFETY DATA SHEET
Revision Date: 06/04/2003
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION
PRODUCT: Tellus庐 Oil T 22
MSDS NUMBER: 60531E - 8
PRODUCT CODE(S): 65400
MANUFACTURER TELEPHONE NUMBERS
SOPUS Products Spill Information: (877) 242-7400
P.O. Box 4453 Health Information: (877) 504-9351
Houston, TX. 77210-4453 MSDS Assistance Number: (877) 276-7285
SECTION 2 PRODUCT/INGREDIENTS
INGREDIENTS CAS# CONCENTRATION
Hydraulic Oil
Highly refined petroleum oils Mixture 85 - 95 %weight
Proprietary additives (contains <1% zinc) Proprietary 3-9 %weight
SECTION 3 HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Appearance & Odor: Pale liquid. Mild odor.
Health Hazards: No known immediate health hazards. High-pressure injection under the skin may cause
serious damage.
Physical Hazards: No known physical hazards.
NFPA Rating (Health, Fire, Reactivity): 0, 1, 0
Hazard Rating:Least - 0 Slight - 1 Moderate - 2 High - 3 Extreme - 4
Inhalation:
Inhalation of vapors (generated at high temperatures only) or oil mist may cause mild irritation of the nose, throat, and
respiratory tract.
Eye Irritation:
Lubricating oils are generally considered no more than minimally irritating to the eyes.
Skin Contact:
May cause slight irritation of the skin. If irritation occurs, a temporary burning sensation and minor redness and/or swelling
may result. Release of the material during high-pressure applications may result in injection under the skin causing
possible extensive tissue damage which is difficult to heal. Other adverse effects not expected from brief skin contact.
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
Ingestion:
Lubricating oils are generally no more than slightly toxic if swallowed.
Other Health Effects:
Material may release hydrogen sulfide (H2S), a highly toxic and extremely flammable gas, when heated to 180 Degrees F
or higher. H2S can cause irritation of the eyes and respiratory tract, headache, dizziness, nausea, vomitting, diarrhea, and
pulmonary edema. The odor ("rotten egg") threshold is 0.02 ppm. Do not depend on sense of smell for warning; H2S
rapidly deadens the sense of smell.
Signs and Symptoms:
Irritation as noted above. Local necrosis is evidenced by delayed onset of pain and tissue damage a few hours following
injection.
Aggravated Medical Conditions:
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure to this product.
For additional health information, refer to section 11.
SECTION 4 FIRST AID MEASURES
Inhalation:
If the victim has difficulty breathing or tightness of the chest, is dizzy, vomiting or unresponsive, give 100% oxygen with
rescue breathing or CPR as required and transport to the nearest medical facility.
Skin:
Remove contaminated clothing and shoes and wipe excess from skin. Flush skin with water, then wash with soap and
water. If irritation occurs, get medical attention. Do not reuse clothing until cleaned. If material is injected under the skin,
transport to the nearest medical facility for additional treatment. If redness, swelling, pain and/or blisters occur, transport
to the nearest medical facility for additional treatment.
Eye:
Flush with water. If irritation occurs, get medical attention.
Ingestion:
Do not induce vomiting. In general, no treatment is necessary unless large quantities of product are ingested. However,
get medical attention. Have victim rinse mouth out with water, then drink sips of water to remove taste from mouth. If
vomiting occurs spontaneously, keep head below hips to prevent aspiration.
Note to Physician:
In general, emesis induction is unnecessary in high viscosity, low volatility products such as oils and greases.
SECTION 5 FIRE FIGHTING MEASURES
Flash Point [Method]: >350 潞F/>176.67 潞C [ Cleveland Open Cup]
Extinguishing Media:
Material will float and can be re-ignited on surface of water. Use water fog, 'alcohol foam', dry chemical or carbon dioxide
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
(CO2) to extinguish flames. Do not use a direct stream of water.
Fire Fighting Instructions:
Material will not burn unless preheated. Do not enter confined fire space without full bunker gear (helmet with face shield,
bunker coats, gloves and rubber boots), including a positive pressure, NIOSH approved, self-contained breathing
apparatus.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Protective Measures:
May burn although not readily ignitable.
Wear appropriate personal protective equipment when cleaning up spills. Refer to Section 8.
Spill Management:
FOR LARGE SPILLS: Remove with vacuum truck or pump to storage/salvage vessels.
FOR SMALL SPILLS: Soak up residue with an absorbent such as clay, sand or other suitable material. Place in
non-leaking container and seal tightly for proper disposal.
Place in container for proper disposal.
Reporting:
CERCLA: Product is covered by EPA's Comprehensive Environmental Response, Compensation and Liability Act
(CERCLA) petroleum exclusion. Releases to air, land, or water are not reportable under CERCLA (Superfund).
CWA: This product is an oil as defined under Section 311 of EPA's Clean Water Act (CWA). Spills into or leading to
surface waters that cause a sheen must be reported to the National Response Center, 1-800-424-8802.
SECTION 7 HANDLING AND STORAGE
Precautionary Measures:
Wash with soap and water before eating, drinking, smoking, applying cosmetics, or using toilet. Launder contaminated
clothing before reuse. Properly dispose of contaminated leather articles such as shoes or belts that cannot be
decontaminated. Avoid heat, open flames, including pilot lights, and strong oxidizing agents. Use explosion-proof
ventilation to prevent vapor accumulation. Ground all handling equipment to prevent sparking.
Material may release hydrogen sulfide (H2S), a highly toxic and extremely flammable gas, when heated to 180 Degrees F
or higher. H2S may collect in the headspace of the container.
Storage:
Store in a cool, dry place with adequate ventilation. Keep away from open flames and high temperatures.
Container Warnings:
Keep containers closed when not in use. Containers, even those that have been emptied, can contain explosive vapors.
Do not cut, drill, grind, weld or perform similar operations on or near containers.
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
Chemical Limit TWA STEL Ceiling Notation
Oil mist, mineral ACGIH TLV 5 mg/m3 10 mg/m3
Oil mist, mineral OSHA PEL 5 mg/m3
Decomposition Product Limit TWA STEL Ceiling Notation
Hydrogen sulfide ACGIH - TLV 10 ppmm 15 ppmm
OSHA -
Hydrogen sulfide 10 ppmm 15 ppmm
PEL_IS
Decomposition Product Method Condition
Hydrogen sulfide Elevated Temperatures > 180 F.
Exposure Controls
Adequate ventilation to control airborne concentrations below the exposure guidelines/limits.
Personal Protection
Personal protective equipment (PPE) selections vary based on potential exposure conditions such as handling practices,
concentration and ventilation. Information on the selection of eye, skin and respiratory protection for use with this material
is provided below.
Eye Protection:
Chemical Goggles, or Safety glasses with side shields
Skin Protection:
Use protective clothing which is chemically resistant to this material. Selection of protective clothing depends on potential
exposure conditions and may include gloves, boots, suits and other items. The selection(s) should take into account such
factors as job task, type of exposure and durability requirements.
Published literature, test data and/or glove and clothing manufacturers indicate the best protection is provided by:
Neoprene, or Nitrile Rubber
Respiratory Protection:
If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an
approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the
requirements of the OSHA Respiratory Protection Standard, 29 CFR 1910.134.
Types of respirator(s) to be considered in the selection process include:
For Mist: Air Purifying, R or P style NIOSH approved respirator.For Vapors: Air Purifying, R or P style
prefilter & organic cartridge, NIOSH approved respirator. Self-contained breathing apparatus for use in
environments with unknown concentrations or emergency situations.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
Appearance & Odor: Pale liquid. Mild odor.
Substance Chemical Family: Lubricants
> 350 潞F [Cleveland
Flash Point Odor Mild odor.
Open Cup]
Pour Point -20 潞F - -40 潞F Specific Gravity 0.86 - 0.87
Viscosity > 20 cSt @ 40 潞C
SECTION 10 REACTIVITY AND STABILITY
Stability:
Material is stable under normal conditions.
Conditions to Avoid:
Avoid heat and open flames.
Materials to Avoid:
Avoid contact with strong oxidizing agents.
Hazardous Decomposition Products:
Thermal decomposition products are highly dependent on combustion conditions. A complex mixture of airborne solids,
liquids and gases will evolve when this material undergoes pyrolysis or combustion. Aldehydes, Carbon Monoxide,
Carbon Dioxide, Hydrogen Sulfide, Ketones and other unidentified organic compounds may be formed upon combustion.
SECTION 11 TOXICOLOGICAL INFORMATION
Acute Toxicity
OSHA
TEST Result Material Tested
Classification
Dermal LD50 >5.0 g/kg(Rabbit) Non-Toxic Based on components(s)
Oral LD50 >5.0 g/kg(Rat) Non-Toxic Based on components(s)
Carcinogenicity Classification
Chemical Name NTP IARC ACGIH OSHA
Hydraulic Oil No Not Reviewed No No
SECTION 12 ECOLOGICAL INFORMATION
Environmental Impact Summary:
There is no ecological data available for this product. However, this product is an oil. It is persistent and does not readily
biodegrade. However, it does not bioaccumulate.
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
SECTION 13 DISPOSAL CONSIDERATIONS
RCRA Information:
Under RCRA, it is the responsibility of the user of the material to determine, at the time of the disposal, whether the
material meets RCRA criteria for hazardous waste. This is because material uses, transformations, mixtures, processes,
etc. may affect the classification. Refer to the latest EPA, state and local regulations regarding proper disposal.
SECTION 14 TRANSPORT INFORMATION
US Department of Transportation Classification
This material is not subject to DOT regulations under 49 CFR Parts 171-180.
Oil: This product is an oil under 49CFR (DOT) Part 130. If shipped by rail or highway in a tank with a capacity of 3500
gallons or more, it is subject to these requirements. Mixtures or solutions containing 10% or more of this product may also
be subject to this rule.
International Air Transport Association
Not regulated under IATA rules.
International Maritime Organization Classification
Not regulated under International Maritime Organization rules.
SECTION 15 REGULATORY INFORMATION
Federal Regulatory Status
OSHA Classification:
Product is hazardous according to the OSHA Hazard Communication Standard, 29 CFR 1910.1200, because it carries the
occupational exposure limit for mineral oil mist.
Ozone Depleting Substances (40 CFR 82 Clean Air Act):
This material does not contain nor was it directly manufactured with any Class I or Class II ozone depleting substances.
Superfund Amendment & Reauthorization Act (SARA) Title III:
There are no components in this product on the SARA 302 list.
SARA Hazard Categories (311/312):
Immediate Health Delayed Health Fire Pressure Reactivity
NO NO NO NO NO
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
SARA Toxic Release Inventory (TRI) (313):
There are no components in this product on the SARA 313 list.
Toxic Substances Control Act (TSCA) Status:
All component(s) of this material is(are) listed on the EPA/TSCA Inventory of Chemical Substances.
Other Chemical Inventories:
Component(s) of this material is (are) listed on the Australian AICS, Canadian DSL, European EINECS,
State Regulation
This material is not regulated by California Prop 65, New Jersey Right-to-Know Chemical List or Pennsylvania
Right-To-Know Chemical List. However for details on your regulation requirements you should contact the appropriate
agency in your state.
SECTION 16 OTHER INFORMATION
Revision#: 8
Revision Date: 06/04/2003
Revisions since last change (discussion): This Material Safety Data Sheet (MSDS) has been newly reviewed
to fully comply with the guidance contained in the ANSI MSDS standard (ANSI Z400.1-1998). We encourage
you to take the opportunity to read the MSDS and review the information contained therein.
SECTION 17 LABEL INFORMATION
READ AND UNDERSTAND MATERIAL SAFETY DATA SHEET BEFORE HANDLING OR DISPOSING OF PRODUCT.
THIS LABEL COMPLIES WITH THE REQUIREMENTS OF THE OSHA HAZARD COMMUNICATION STANDARD (29
CFR 1910.1200) FOR USE IN THE WORKPLACE. THIS LABEL IS NOT INTENDED TO BE USED WITH PACKAGING
INTENDED FOR SALE TO CONSUMERS AND MAY NOT CONFORM WITH THE REQUIREMENTS OF THE
CONSUMER PRODUCT SAFETY ACT OR OTHER RELATED REGULATORY REQUIREMENTS.
PRODUCT CODE(S): 65400
Tellus庐 Oil T 22
ATTENTION!
PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE OIL ACNE OR DERMATITIS. HIGH-PRESSURE
INJECTION UNDER SKIN MAY CAUSE SERIOUS DAMAGE.
Precautionary Measures: Avoid prolonged or repeated contact with eyes, skin and clothing. Avoid breathing of
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
vapors, fumes, or mist. Use only with adequate ventilation. Wash thoroughly after handling.
FIRST AID
Inhalation: If the victim has difficulty breathing or tightness of the chest, is dizzy, vomiting or unresponsive, give 100%
oxygen with rescue breathing or CPR as required and transport to the nearest medical facility.
Skin Contact: Remove contaminated clothing and shoes and wipe excess from skin. Flush skin with water, then wash
with soap and water. If irritation occurs, get medical attention. Do not reuse clothing until cleaned. If material is injected
under the skin, transport to the nearest medical facility for additional treatment. If redness, swelling, pain and/or blisters
occur, transport to the nearest medical facility for additional treatment.
Eye Contact: Flush with water. If irritation occurs, get medical attention.
Ingestion: Do not induce vomiting. In general, no treatment is necessary unless large quantities of product are ingested.
However, get medical attention. If vomiting occurs spontaneously, keep head below hips to prevent aspiration. Have
victim rinse mouth out with water, then drink sips of water to remove taste from mouth.
FIRE
In case of fire, Use water fog, 'alcohol foam', dry chemical or carbon dioxide (CO2) to extinguish flames. Do not use a
direct stream of water. Material will float and can be re-ignited on surface of water.
SPILL OR LEAK
Dike and contain spill.
FOR LARGE SPILLS: Remove with vacuum truck or pump to storage/salvage vessels.
FOR SMALL SPILLS: Soak up residue with an absorbent such as clay, sand or other suitable material. Place in
non-leaking container and seal tightly for proper disposal.
CONTAINS: Highly refined petroleum oils, Mixture; Proprietary additives (contains <1% zinc), Proprietary
NFPA Rating (Health, Fire, Reactivity): 0, 1, 0
TRANSPORTATION
US Department of Transportation Classification
This material is not subject to DOT regulations under 49 CFR Parts 171-180.
Oil: This product is an oil under 49CFR (DOT) Part 130. If shipped by rail or highway in a tank with a capacity of 3500
gallons or more, it is subject to these requirements. Mixtures or solutions containing 10% or more of this product may also
be subject to this rule.
CAUTION: Misuse of empty containers can be hazardous. Empty containers can be hazardous if used to store toxic,
flammable, or reactive materials. Cutting or welding of empty containers might cause fire, explosion or toxic fumes from
residues. Do not pressurize or expose to open flames or heat. Keep container closed and drum bungs in place.
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
Name and Address
SOPUS Products
P.O. Box 4453
Houston, TX 77210-4453
ADMINISTRATIVE INFORMATION
MANUFACTURER ADDRESS: SOPUS Products, P.O. Box 4453, Houston, TX. 77210-4453
Company Product Stewardship & Regulatory Compliance Contact: Timothy W Childs
Phone Number: (281) 874-7708
THE INFORMATION CONTAINED IN THIS DATA SHEET IS BASED ON THE DATA AVAILABLE TO US AT THIS TIME,
AND IS BELIEVED TO BE ACCURATE BASED UPON THAT : IT IS PROVIDED INDEPENDENTLY OF ANY SALE OF
THE PRODUCT, FOR PURPOSE OF HAZARD COMMUNICATION. IT IS NOT INTENDED TO CONSTITUTE
PRODUCT PERFORMANCE INFORMATION, AND NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND IS MADE
WITH RESPECT TO THE PRODUCT, UNDERLYING DATA OR THE INFORMATION CONTAINED HEREIN. YOU ARE
URGED TO OBTAIN DATA SHEETS FOR ALL PRODUCTS YOU BUY, PROCESS, USE OR DISTRIBUTE, AND ARE
ENCOURAGED TO ADVISE THOSE WHO MAY COME IN CONTACT WITH SUCH PRODUCTS OF THE
INFORMATION CONTAINED HEREIN.
TO DETERMINE THE APPLICABILITY OR EFFECT OF ANY LAW OR REGULATION WITH RESPECT TO THE
PRODUCT, YOU SHOULD CONSULT WITH YOUR LEGAL ADVISOR OR THE APPROPRIATE GOVERNMENT
AGENCY. WE WILL NOT PROVIDE ADVICE ON SUCH MATTERS, OR BE RESPONSIBLE FOR ANY INJURY FROM
THE USE OF THE PRODUCT DESCRIBED HEREIN. THE UNDERLYING DATA, AND THE INFORMATION PROVIDED
HEREIN AS A RESULT OF THAT DATA, IS THE PROPERTY OF SOPUS PRODUCTS AND IS NOT TO BE THE
SUBJECT OF SALE OR EXCHANGE WITHOUT THE EXPRESS WRITTEN CONSENT OF SOPUS PRODUCTS.
38420-11460-100R-06/03/2003
Tellus庐 Oil T 22 MSDS# 60531E
Page of 8
|