24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
MATERIAL SAFETY DATA SHEET
SECTION 1 鈥? CHEMICAL PRODUCT AND DISTRIBUTOR IDENTIFICATION
Issued by: JEEN INTERNATIONAL CORPORATION Chemtrec Emergency Tel.# 800-424-9300
24 MADISON ROAD Chemtrec Int鈥檒 Tel.# 703-527-3887(Collect Calls Accepted)
FAIRFIELD, NJ 07004
Tel#: (973) 439-1401
PRODUCT: JEECIDE DMDM HYDANTOIN
SECTION 2- COMPOSITION, INFORMATION ON INGREDIENTS
CAS # 6440-58-0
Chemical Name: DMDM Hydatntoin
Hazard Symbols: None Listed
Risk Phrases: None Listed
SECTION 3- HAZARDS IDENTIFICATION
Eye Contact: May irritate eyes
Skin Contact: May irritate skin
Inhalation: May irritate respiratory system
SECTION 4- FIRST AID MEASURES
Skin: Wash with soap and water. If irritation develops, seek medical attention.
Eyes: Flush with water for 15 minutes, if irritation develops, seek medical attention.
Inhalation: Remove to fresh air. If not breathing, clear airway and start artificial respiration. If victim is having trouble breathing,
administer oxygen or artificial respiration as needed. Get immediate medical attention.
Ingestion: If swallowed, give 3-4 glasses of water but do not induce vomiting. If vomiting does occur, give fluids again. Get
medical attention to determine whether vomiting or evacuation of stomach is necessary. Do not give anything by
mouth to an unconscious or convulsing person.
SECTION 5- FIRE FIGHTING MEASURES
Flash Point: >200 deg. F
Extinguishing Media: Water, Foam, Dry chemical or Carbon Dioxide
Special Fire Fighting Procedures: Must wear NIOSH/MSHA approved self-contained breathing apparatus and protective clothing.
Cool Fire-Exposed containers with water spray.
Unusual Fire and Explosion Hazards: Products of combustion are toxic. At high Temperatures, this will release formaldehyde.
JEECIDE DMDM HYDANTOIN PAGE 1 OF 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
SECTION 6- ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment
Spills / Leaks: Caution, floors may become slippery. Water appropriate protective equipment and NIOSH / MSHA
approved respirator where mists or vapours of unknown concentrations may be generated (self-contained
breathing apparatus preferred). Warning! When spilled, and liquid spreads over a large area, irritating
levels of gaseous formaldehyde may be released. In such cases, self contained breathing apparatus should
be used. Dike and contain spill with inert material (Sand, Earth, Etc.,) and transfer the liquid and soil
separately to containers for recovery or disposal. Keep spill out of sewers and open bodies of water.
SECTION 7- HANDLING STORAGE
Precautions to be taken in Handling and Storage:
Store in a warm warehouse. Avoid storing below 60 deg. F to prevent crystallization. Keep container sealed. Protect form
freezing.
SECTION 8- EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Personal Protective Equipment
Ventilation: In process where mists or vapors may be generated, proper ventilation must be provided in accordance
with good ventilation practices.
Respiration Protection: In process where mists or vapors may be generated, a NIOSH/MSHA jointly approved respirator is advised
in the absence of proper environmental controls.
Protective Clothing: Rubber or neoprene gloves, when needed, to prevent skin contact. Long sleeves, coveralls or other
appropriate clothing, when needed, to prevent skin contact.
Eye Protection: Wear chemicals splash goggles where there is a potential for eye contact. Use safety glasses with side
shields under normal use conditions.
Other Protective Equipment:
Eye wash station, safety shower in work area.
SECTION 9- PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Water White Liquid
Molecular Weight: 188
Formula: C7 H12 N2 O4
pH: 6.5 鈥? 7.5
Percent Volatile (by weight): 45
Solubility: Soluble in water
Specific Gravity: 1.16 @ 25%
SECTION 10- STABILITY AND REACTIVITY
Stability: Stable
Incompatibility (Material to avoid): Avoid contact with strong oxidizing agents.
Hazards Polymerization: Will not occur
JEECIDE DMDM HYDANTOIN - MSDS - PAGE 2 OF 3
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
SECTION 11- TOXICOLOGICAL INFORMATION
Oral LD50 (Rat): 3300 Mg/Kg
Dermal (Rabbit): Mild Irritant
Eyes (Rabbit): Mild Irritant
Inhalation LD50 (Rat):
For 4 hours > 5 MB/1 Nominal concentration. Histologic examination of nasal turbinates and pulmonary organs indicated a total
ansence of notable pathology.
SECTION 12- ECOLOGICAL INFORMATION
Other: No information available
SECTION 13- DISPOSAL CONSIDERATIONS
Dispose of in compliance with all federal, state and local laws and regulations. Incineration is the preferred method.
SECTION 14- TRANSPORT INFORMATION
IATA: Not regulated as a hazardous material
IMO: Not regulated as a hazardous material
RID / ADR: Not regulated as a hazardous material
SECTION 15- REGULATORY INFORMATION
European / International Regulations
European Labeling in accordance with EC Directives
Hazard Symbols: Not available
SECTION 16- ADDITIONAL INFORMATION
While JEEN International Corporation believes the data set forth herein are accurate as of the date hereof, it is furnished without
warranty of any kind and specially disclaims all liability for reliance on the information provided. The data is furnished solely for your
consideration, investigation and verification. Since the conditions of handling and use are beyond our control, we make no guarantee of
results and assume no liability for damage incurred by use of this material. It is the responsibility of the user to comply with all
applicable laws and regulations.
JEECIDE DMDM HYDANTOIN - MSDS - PAGE 3 OF 3
|