24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
Material Safety Data Sheet
Manufacturer: JEEN International Corporation Chemtrec Emergency Tel.# 800-424-9300
24 MADISON ROAD Chemtrec Int鈥檒 Tel.# 703-527-3887(Collect Calls Accepted)
FAIRFIELD, NJ 07004
Telephone #: 973-439-1401 Date Prepared: 3-30-98
Section 1 - Identification
Product Number: 04-PMB
Trade Name: JEECIDE PMB HMIS Codes:
Product Class: Cosmetic Preservative Blend H 1
F 0
R 0
Section 2 - Ingredients
Component CAS No. Classification
IODOPROPYNYL BUTYLCARBAMATE 55406-53-6 Cosmetic Preservative (INCI Name)
METHYL PARABEN 99-76-3 Cosmetic Preservative (INCI Name)
BUTYL PARABEN 94-26-8 Cosmetic Preservative (INCI Name)
PROPYLENE GLYCOL 57-55-6 Cosmetic Solvent (INCI Name)
*SARA TITLE III Section 313 Listed
This product is supplied in compliance with TSCA reporting requirements.
Section 3 - Physical Data
Boiling Point: 186潞C Vapor Pressure:
Percent Volatile: <3% Viscosity: > 43 cp
Evaporation Rate: (NBAC=1) 0.01 Specific Gravity: approx. 1.1g/ml
Solubility in Water: Partially pH: Neutral
Appearance: Clear, Light Amber Liquid Odor: Slight
Section 4 - Fire and Explosion Hazard Data
Flashpoint: >100潞C Method Used: COC
Flammability Limits in Air (by Vol.) Lower Upper
Extinguishing Medium: Foam, CO2, waterspray
Special Fire Fighting Procedure: Use self-contained breathing apparatus and protective clothing.
Section 5 - Reactivity Data
Stability: Stable Conditions to Avoid: Strong Acids and Bases.
Incompatibility: (Materials to Avoid)
Hazardous Decomposition Products: Do not occur
Hazardous Polymerization: Does not occur
Polymerization Conditions to Avoid:
Corrosive to Metal: Avoid contact with blank iron.
Page No. 1 of 2 - MSDS - JEECIDE PMB
24 Madison Road, Fairfield, New Jersey 07004, USA
Tel: 800-771-JEEN (5336), Tel: 973-439-1401, Fax: 973-439-1402,
email: info@jeen.com , Website: www.jeen.com
MATERIAL SAFETY DATA SHEET
Section 6 - Health Hazard Data
Toxicological Test Data: (active ingredients)
Iodopropynyl Butylcarbamate: LD50 rat: 1470 - 1795 mg/kg
Methyl Paraben: LD 50 mus: 960 mg/kg
Butyl Paraben: LD 50 mus: 230 mg/kg.
Effects of Overexposure
Routes of overexposure to this product include eye or skin contact or by inhalation.
EYE: Contact may result in irritation.
SKIN: Contact may result in irritation.
INHALATION: Prolonged exposure to vapors may cause dizziness, headache, nausea, confusion or vomiting.
INGESTION: May cause irritation to respiratory tract or mucous membranes.
First Aid and Emergency Procedures
EYE: Flush with large quantities of water for 15 minutes. Obtain medical attention if irritation develops.
SKIN: Remove contaminated clothing. Wash areas affected with water and soap. Remove and launder
contaminated clothing before reuse.
INHALATION: Move to fresh air, provide aid in breathing if necessary. Get immediate medical attention.
INGESTION: If swallowed, do not induce vomiting. Dilute any effect by drinking water and get immediate medical
attention.
Section 7 - Special Protection Information
Respiratory Protection: If vapors or mists may be generated, wear a NIOSH/MSHA approved organic vapor or mist
respirator.
Eye Protection: Use chemical safety goggles or face shields.
Protective Clothing: Use gloves impervious to solvent plus impervious aprons, clothing and boots as necessary
to prevent skin contact.
Ventilation: Use general or local exhausts to control vapors or mists to levels below OSHA PEL and
ACGIH
Other: Eyewash fountains should be easily accessible.
Section 8 - Precautions for Safe Handling and Use
Storage Care: Store in dry, cool, ventilated areas away from food or feed products. Keep out of the reach
of children.
Section 9 - Environmental Data
Environmental Toxicity Data: The product is biodegradable.
Spill and Leak Procedures: Do not discard into sewerage or open waters. Take up with oil spill absorbent and
dispose of according to local authority regulations.
Hazardous Substance Superfund: N/A
Waste Disposal Method: Incineration according to local, state and federal requirements.
Hazardous Waste 40 CFR 261: No, (Biodegradable)
Container Disposal: Reuse for suitable products which contain appropriate diluted concentration in
final use level or clean thoroughly before any other reuse.
While JEEN International Corporation believes the data set forth herein are accurate as of the date hereof, it is furnished without warranty of any kind and specially disclaims
all liability for reliance on the information provided. The data is furnished solely for your consideration, investigation and verification. Since the conditions of handling and use
are beyond our control, we make no guarantee of results and assume no liability for damage incurred by use of this material. It is the responsibility of the user to comply with
all applicable laws and regulations.
Page No. 2 of 2 - MSDS - JEECIDE PMB
|