Product Name: Moncina Dry & Prep
Page: 1 of 5
This revision issued: February, 2004
SECTION 1 - IDENTIFICATION OF CHEMICAL PRODUCT AND COMPANY
Statement of Hazardous Nature
This product is classified as: Not classified as hazardous according to the criteria of NOHSC Australia.
Dangerous according to the Australian Dangerous Goods (ADG) Code.
p 02 9363 2753
australianbeautysolutions pty ltd
exclusive distributor of MONCINA 庐 nail products f 02 9328 5092
240 New South Head Road, Edgecliff NSW 2027 email: info @moncina.com.au
www.moncina.com.au
Substance: Mixture of solvents.
Trade Name: Moncina Dry & Prep
Product Use: Fingernail prepping liquid.
Creation Date: May, 2003
Revision Date: February, 2004
Section 2 - Composition/Information on Ingredients
3 3
Ingredients CAS No Conc,% TWA (mg/m ) STEL (mg/m )
Ethyl acetate 141-78-6 >30 720 not set
Isopropanol 67-63-0 >40 983 1230
Isobutyl acetate 110-19-0 >20 713 not set
Other non hazardous ingredients secret to 100 not set not set
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non
hazardous ingredients are also possible.
The TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5
day working week. The STEL (Short Term Exposure Limit) is an exposure value that should not be exceeded for more than 15 minutes and should
not be repeated for more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is
used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.
Section 3 - Hazards Identification
Risk Phrases: R11, R66. Highly flammable. Repeated exposure may cause skin dryness or cracking.
Safety Phrases: S24, S29, S33. Avoid contact with skin. Do not empty into drains. Take precautionary measures
against static discharges.
SUSDP Classification: None allocated.
ADG Classification: Class 3 (FLAMMABLE LIQUID, N.O.S.)
UN Number: 1993
Emergency Overview
Physical Description & colour: Clear, colourless mobile liquid.
Odour: Fruity ester (chemical) odour.
Major Health Hazards: no significant risk factors have been found for this product.
Potential Health Effects
Note that in this MSDS we are addressing risks offered to workers who may be exposed to the product for
up to 40 hours per week. The risk offered to their clients or to domestic users are negligible.
Inhalation
Short term exposure: Available data indicates that this product is not harmful. However product may be mildly
irritating, although unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term inhalation.
Skin Contact:
Short term exposure: Available data indicates that this product is not harmful. It should present no hazards in
normal use. However product may be irritating, but is unlikely to cause anything more than mild transient discomfort.
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina Dry & Prep
Page: 2 of 5
This revision issued: February, 2004
Long Term exposure: No data for health effects associated with long term skin exposure.
Eye Contact:
Short term exposure: Available data shows that this product is not harmful. However product is believed to be
mildly irritating, to eyes, but is unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term eye exposure.
Ingestion:
Short term exposure: This product may be irritating to mucous membranes but is unlikely to cause anything more
than transient discomfort.
Long Term exposure: No data for health effects associated with long term ingestion.
Carcinogen Status:
NOHSC: No significant ingredient is classified as carcinogenic by NOHSC.
NTP: No significant ingredient is classified as carcinogenic by NTP.
IARC: Isopropanol is Class 3 - unclassifiable as to carcinogenicity to humans.
Section 4 - First Aid Measures
General Information:
You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by
this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all
times. Have this MSDS with you when you call.
Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Skin Contact: Irritation is unlikely. However, if irritation does occur, flush with lukewarm, gently flowing water for 5
minutes or until chemical is removed. If in doubt obtain medical advice.
Eye Contact: Quickly and gently blot or brush product away. Flush the contaminated eye(s) with lukewarm, gently
flowing water until the product is removed or until irritation has ceased, while holding the eyelid(s) open. Obtain
medical advice if irritation becomes painful or lasts more than a few minutes.
Ingestion: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Section 5 - Fire Fighting Measures
Fire and Explosion Hazards: This product is classified as a C1 combustible product. There is a moderate risk of
an explosion from this product if commercial quantities are involved in a fire. Firefighters should take care and
appropriate precautions. Any explosion will likely spread the fire to surrounding materials. Water spray may be used
to cool drums involved in a fire, reducing the chances of an explosion. Vapours from this product are heavier than air
and may accumulate in sumps, pits and other low-lying spaces, forming potentially explosive mixtures. They may also
flash back considerable distances.
Fire decomposition products from this product may be toxic if inhaled. Take appropriate protective measures.
Extinguishing Media: Preferred extinguishing media are carbon dioxide, dry chemical, foam, water fog. Foam is
the preferred medium for large fires.
Fire Fighting: When fighting fires involving significant quantities of this product, wear a splash suit complete with
self contained breathing apparatus.
Flash point: 20掳C
Upper Flammability Limit: 11.4%
Lower Flammability Limit: 2.0%
Autoignition temperature: No data.
Flammability Class: C1
Section 6 - Accidental Release Measures
Accidental release: In the event of a major spill, prevent spillage from entering drains or water courses. Evacuate
the spill area and deny entry to unnecessary and unprotected personnel. Immediately call the Fire Brigade. As a
minimum, wear overalls, goggles and gloves. Suitable materials for protective clothing include rubber, PVC. Stop leak
if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. If spill is too
large or if absorbent material is not available, try to create a dike to stop material spreading or going into drains or
waterways. Avoid using sawdust or other combustible material. Sweep up and shovel or collect recoverable product
into labelled containers for recycling or salvage, and dispose of promptly. Recycle containers wherever possible after
careful cleaning. After spills, wash area preventing runoff from entering drains. If a significant quantity of material
enters drains, advise emergency services. This material may be suitable for approved landfill. Ensure legality of
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina Dry & Prep
Page: 3 of 5
This revision issued: February, 2004
disposal by consulting regulations prior to disposal. Thoroughly launder protective clothing before storage or re-use.
Advise laundry of nature of contamination when sending contaminated clothing to laundry.
Section 7 - Handling and Storage
Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check
Section 8 of this MSDS for details of personal protective measures, and make sure that those measures are followed.
The measures detailed below under "Storage" should be followed during handling in order to minimise risks to
persons using the product in the workplace. Also, avoid contact or contamination of product with incompatible
materials listed in Section 10.
Storage: Store in a cool, well ventilated area, and make sure that surrounding electrical devices and switches are
suitable. Check containers periodically for leaks. Containers should be kept closed in order to minimise contamination
and possible evaporation. Make sure that the product does not come into contact with substances listed under
"Materials to avoid" in Section 10. If you keep more than 100L of flammable liquids of Packaging Groups I and or II,
you probably require a license to do so. If you have any doubts, we suggest you contact your licensing authority in
order to clarify your obligations. Check packaging - there may be further storage instructions on the label.
Section 8 - Exposure Controls and Personal Protection
The following Australian Standards will provide general advice regarding safety clothing and equipment:
Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial Clothing: AS2919, Industrial Eye
Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210.
TWA (mg/m3) STEL (mg/m3)
Exposure Limits
Ethyl acetate 720 not set
Isopropanol 983 1230
Isobutyl acetate 713 not set
Note that in this MSDS we are addressing risks offered to workers who may be exposed to the product for
up to 40 hours per week. The risk offered to their clients or to domestic users are negligible.
Ventilation: No special ventilation requirements are normally necessary for this product unless temperatures are
high, or unless there has been a large spill. However make sure that the work environment remains clean and that
vapours and mists are minimised.
Eye Protection: Eye protection is not normally necessary when this product is being used.
Skin Protection: You should avoid contact even with mild skin irritants. Therefore you should wear suitable
impervious gloves when handling this product. See below for suitable material types.
Protective Material Types: We suggest that protective clothing be made from the following materials: rubber,
PVC.
Respirator: Usually, no respirator is necessary when using this product. However, if you have any doubts consult
the Australian Standard mentioned above.
Safety deluge showers should be provided near to where this product is being used if used in bulk quantities.
Section 9 - Physical and Chemical Properties:
Physical Description & colour: Clear, colourless mobile liquid.
Odour: Fruity ester (chemical) odour.
Boiling Point: 77掳C at 100kPa
Freezing/Melting Point: No specific data. Liquid at normal temperatures.
Volatiles: >99% at 100掳C
Vapour Pressure: 9.63 kPa at 20掳C
Vapour Density: No data.
Specific Gravity: No data. Known to be less than 1
Water Solubility: Approx 8.7% at 20掳C
pH: No data.
Volatility: No data.
Odour Threshold: No data.
Evaporation Rate: No data.
Coeff Oil/water distribution: No data
Autoignition temp: No data.
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina Dry & Prep
Page: 4 of 5
This revision issued: February, 2004
Section 10 - Stability and Reactivity
Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have
any doubts, contact the supplier for advice on shelf life properties.
Conditions to Avoid: This product should be kept in a cool place, preferably below 30掳C. Keep away from sources
of sparks or ignition. Handle and open containers carefully. Any electrical equipment in the area of this product should
be flame proofed.
Incompatibilities: oxidising agents.
Fire Decomposition: Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Water.
Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision,
disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation: This product is unlikely to undergo polymerisation processes.
Section 11 - Toxicological Information
Local Effects:
Target Organs: There is no data to hand indicating any particular target organs.
Classification of Hazardous Ingredients
Ingredient Risk Phrases
No hazardous ingredients present in hazardous concentrations.
Section 12 - Ecological Information
This product is biodegradable. It will not accumulate in the soil or water or cause long term problems.
Section 13 - Disposal Considerations
Disposal: Containers should be emptied as completely as practical before disposal. If possible, recycle containers
either in-house or send to recycle company. If this is not practical, send to a commercial waste disposal site. Please
do NOT dispose into sewers or waterways.
Section 14 - Transport Information
ADG Code: 1993, FLAMMABLE LIQUID, N.O.S.
Hazchem Code: 3[Y]E
Special Provisions: SP109, SP185, SP274
Dangerous Goods Class: Class 3, Flammable liquids.
Packaging Group: II
Packaging Method: 3.8.3, RT1
Class 3 Flammable Liquids shall not be loaded in the same vehicle or packed in the same freight container with
Classes 1 (Explosives), 2.1 (Flammable Gases where flammable liquids and flammable gases are both in bulk), 2.3
(Toxic Gases), 4.2 (Spontaneously Combustible Substances), 5.1 (Oxidising Agents), 5.2 (Organic Peroxides), 6
(Toxic Substances, except Flammable Liquid is nitromethane), and 7 (Radioactive Substances). They may however
be loaded in the same vehicle or packed in the same freight container with Classes 2.1 (Flammable Gases except
where the Flammable Liquids and Flammable Gases are in bulk), 2.2 (Non-Flammable Non-Toxic Gases), 4.1
(Flammable Solids), 4.3 (Dangerous When Wet Substances), 6 (Toxic Substances, except where Flammable Liquid is
nitromethane), 8 (Corrosive Substances), 9 (Miscellaneous Dangerous Goods), Foodstuffs or foodstuff empties.
Section 15 - Regulatory Information
AICS: All of the significant ingredients in this formulation are to be found in the public AICS Database.
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina Dry & Prep
Page: 5 of 5
This revision issued: February, 2004
Section 16 - Other Information
This MSDS contains only safety-related information. For other data see product literature.
Acronyms:
ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail
AICS Australian Inventory of Chemical Substances
CAS number Chemical Abstracts Service Registry Number
Hazchem Number Emergency action code of numbers and letters that provide information to
emergency services especially firefighters
IARC International Agency for Research on Cancer
NOHSC National Occupational Health and Safety Commission
NOS Not otherwise specified
NTP National Toxicology Program (USA)
R-Phrase Risk Phrase
SUSDP Standard for the Uniform Scheduling of Drugs & Poisons
UN Number United Nations Number
THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND
HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS MSDS IN THE CONTEXT OF
HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE.
IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE,
THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS
OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT
TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.
Please read all labels carefully before using product.
This MSDS copyright 漏 Kilford & Kilford Pty Ltd, February, 2004.
http://www.kilford.com.au/ Phone (02)9516 2079
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
|