Product Name: Moncina range of Fine Grade Powders
Page: 1 of 4
This revision issued: February, 2004
SECTION 1 - IDENTIFICATION OF CHEMICAL PRODUCT AND COMPANY
Statement of Hazardous Nature
This product is classified as: Not classified as hazardous according to the criteria of NOHSC Australia.
Not a Dangerous Good according to the Australian Dangerous Goods (ADG) Code.
p 02 9363 2753
australianbeautysolutions pty ltd
exclusive distributor of MONCINA 庐 nail products f 02 9328 5092
240 New South Head Road, Edgecliff NSW 2027 email: info @moncina.com.au
www.moncina.com.au
Substance: Polymer.
Trade Name: Moncina range of Fine Grade Powders
Product Use: Ingredient used in preparing acrylic fingernails.
Creation Date: May, 2003
Revision Date: February, 2004
Section 2 - Composition/Information on Ingredients
3 3
Ingredients CAS No Conc,% TWA (mg/m ) STEL (mg/m )
Poly (Ethyl and Methyl Methacrylate ) 25685-29-4 pure * not set not set
* Commercially pure.
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non
hazardous ingredients are also possible.
The TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5
day working week. The STEL (Short Term Exposure Limit) is an exposure value that should not be exceeded for more than 15 minutes and should
not be repeated for more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is
used w hen the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.
Section 3 - Hazards Identification
Risk Phrases: Not Hazardous - No criteria found.
Safety Phrases: Not Hazardous - No criteria found.
SUSDP Classification: None allocated.
ADG Classification: None allocated. Not a Dangerous Good.
UN Number: None allocated
Emergency Overview
Physical Description & colour: Fine powdered solid - various colours depending on added dye.
Odour: Mild odour.
Major Health Hazards: no significant risk factors have been found for this product.
Potential Health Effects
Note that in this MSDS we are addressing risks offered to workers who may be exposed to the product for
up to 40 hours per week. The risk offered to their clients or to domestic users are negligible.
Inhalation
Short term exposure: Available data indicates that this product is not harmful. However product may be mildly
irritating, although unlikely to cause anything more than mild transient discomfort.
Long Term exposure: No data for health effects associated with long term inhalation.
Skin Contact:
Short term exposure: Available data indicates that this product is not harmful. It should present no hazards in
normal use. In addition product is unlikely to cause any discomfort in normal use.
Long Term exposure: No data for health effects associated with long term skin exposure.
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina range of Fine Grade Powders
Page: 2 of 4
This revision issued: February, 2004
Eye Contact:
Short term exposure: Available data shows that this product is not harmful. However product may be mildly
irritating to eyes, but is unlikely to cause anything more than mild discomfort which should disappear once product is
removed.
Long Term exposure: No data for health effects associated with long term eye exposure.
Ingestion:
Short term exposure: This product is unlikely to cause any irritation problems in the short or long term.
Long Term exposure: No data for health effects associated with long term ingestion.
Carcinogen Status:
NOHSC: No significant ingredient is classified as carcinogenic by NOHSC.
NTP: No significant ingredient is classified as carcinogenic by NTP.
IARC: No significant ingredient is classified as carcinogenic by IARC.
Section 4 - First Aid Measures
General Information:
You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by
this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all
times. Have this MSDS with you when you call.
Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Skin Contact: No specific health data is available for this product. If any unusual symptoms become evident, or if in
doubt, contact a Poisons Information Centre or a doctor.
Eye Contact: No effects expected. If irritation does occur, flush contaminated eye(s) with lukewarm, gently flowing
water for 5 minutes or until the product is removed. Obtain medical advice if irritation becomes painful or lasts more
than a few minutes.
Ingestion: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Section 5 - Fire Fighting Measures
Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is
involved in a fire. Violent steam generation or eruption may occur upon application of direct water stream on hot
liquids in bulk. This product, if scattered, may form flammable or explosive dust clouds in air.
Fire decomposition products from this product may be toxic if inhaled. Take appropriate protective measures.
Extinguishing Media: Preferred extinguishing media are carbon dioxide, dry chemical, foam, water fog.
Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade. Do not scatter spilled
material with high pressure water jets.
Flash point: Not flammable.
Upper Flammability Limit: No data.
Lower Flammability Limit: No data.
Autoignition temperature: No data.
Flammability Class: No data.
Section 6 - Accidental Release Measures
Accidental release: Minor spills do not normally need any special cleanup measures. In the event of a major spill,
prevent spillage from entering drains or water courses. As a minimum, wear overalls, goggles and gloves. Suitable
materials for prot ective clothing include cotton, rubber, PVC. Stop leak if safe to do so, and contain spill. Sweep up
and shovel or collect recoverable product into labelled containers for recycling or salvage, and dispose of promptly.
Recycle containers wherever possible after careful cleaning. After spills, wash area preventing runoff from entering
drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for
approved landfill. Ensure legality of disposal by consulting regulations prior to disposal. Thoroughly launder protective
clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to
laundry.
Section 7 - Handling and Storage
Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check
Section 8 of this MSDS for details of personal protective measures, and make sure that those measures are followed.
The measures detailed below under "Storage" should be followed during handling in order to minimise risks to
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina range of Fine Grade Powders
Page: 3 of 4
This revision issued: February, 2004
persons using the product in the workplace. Also, avoid contact or contamination of product with incompatible
materials listed in Section 10.
Storage: This product is chemically and physically stable and has no special storage requirements. However, make
sure that packaging is sound and store in a suitable clean environment. Store packages of this product in a cool
place. Make sure that the product does not come into contact with substances listed under "Materials to avoid" in
Section 10. Check packaging - there may be further storage instructions on the label.
Section 8 - Exposure Controls and Personal Protection
The following Australian Standards will provide general advice regarding safety clothing and equipment:
Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Industrial Clothing: AS2919, Industrial Eye
Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210.
TWA (mg/m3) STEL (mg/m3)
Exposure Limits
Exposure limits have not been established by NOHSC for this product.
Note that in this MSDS we are addressing risks offered to workers who may be exposed to the product for
up to 40 hours per week. The risk offered to their clients or to domestic users are negligible.
Ventilation: No special ventilation requirements are normally necessary for this product. However make sure that
the work environment remains clean and that dusts are minimised.
Eye Protection: Eye protection is not normally necessary when this product is being used. However, if in doubt,
wear suitable protective glasses or goggles.
Skin Protection: The information at hand indicates that this product is not harmful and that normally no special skin
protection is necessary. However, we suggest that you routinely avoid contact with all chemical products and that you
wear suitable gloves (preferably elbow-length) when handling this product.
Protective Material Types: There is no specific recommendation for any particular protective material type.
Respirator: If there is a significant chance that dusts are likely to build up in the area where this product is being
used, we recommend that you use a suitable Dust Mask.
Section 9 - Physical and Chemical Properties:
Physical Description & colour: Fine powdered solid - various colours depending on added dye.
Odour: Mild odour.
Boiling Point: Decomposes before boiling at 100kPa.
Freezing/Melting Point: Melts in a range above about 100掳C.
Volatiles: No specific data. Expected to be low at 100掳C.
Vapour Pressure: Negligible at normal ambient temperatures.
Vapour Density: No data.
Specific Gravity: No data.
Water Solubility: Insoluble.
pH: No data.
Volatility: No data.
Odour Threshold: No data.
Evaporation Rate: No data.
Coeff Oil/water distribution: No data
Autoignition temp: No data.
Section 10 - Stability and Reactivity
Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have
any doubts, contact the supplier for advice on shelf life properties.
Conditions to Avoid: None known.
Incompatibilities: No particular incompatibilities.
Fire Decomposition: Carbon dioxide, and if combustion is incomplete, carbon monoxide and smoke. Water.
Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision,
disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation: This product is unlikely to undergo polymerisation processes.
Section 11 - Toxicological Information
Local Effects:
Target Organs: There is no data to hand indicating any particular target organs.
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
Product Name: Moncina range of Fine Grade Powders
Page: 4 of 4
This revision issued: February, 2004
Classification of Hazardous Ingredients
Ingredient Risk Phrases
No hazardous ingredients present in hazardous concentrations.
Section 12 - Ecological Information
This product is not biodegradable; it may accumulate in the soil or water and cause long term problems.
Section 13 - Disposal Considerations
Disposal: Containers should be emptied as completely as practical before disposal. If possible, recycle containers
either in-house or send to recycle company. If this is not practical, send to a commercial waste disposal site. This
product should be suitable for landfill. However, check with local Waste Disposal Authority before sending there. Note
that product properties may have been changed in use, significantly altering it's suitability for landfill. Please do NOT
dispose into sewers or waterways.
Section 14 - Transport Information
ADG Code: This product is not classified as a Dangerous Good. No special transport conditions are
necessary unless required by other regulations.
Section 15 - Regulatory Information
AICS: This product was found in the public AICS Database.
Section 16 - Other Information
This MSDS contains only safety-related information. For other data see product literature.
Acronyms:
ADG Code Australian Code for the Transport of Dangerous Goods by Road and Rail
AICS Australian Inventory of Chemical Substances
CAS number Chemical Abstracts Service Registry Number
Hazchem Number Emergency action code of numbers and letters that provide information to
emergency services especially firefighters
IARC International Agency for Research on Cancer
NOHSC National Occupational Health and Safety Commission
NOS Not otherwise specified
NTP National Toxicology Program (USA)
R-Phrase Risk Phrase
SUSDP Standard for the Uniform Scheduling of Drugs & Poisons
UN Number United Nations Number
THIS MSDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND
HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS MSDS IN THE CONTEXT OF
HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE.
IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE,
THE USER SHOULD CONTACT THIS COMPAN SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS
Y
OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT
TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.
Please read all labels carefully before using product.
This MSDS copyright 漏 Kilford & Kilford Pty Ltd, February, 2004.
http://www.kilford.com.au/ Phone (02)9516 2079
MATERIAL SAFETY DATA SHEET
Issued by: australianbeautysolutions pty ltd Phone: 02 9363 2753
|