Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

7732-18-5
106-97-8
64-02-8
74-98-6
111-76-2
68956-79-6
68391-01-5

File Name: oppictures_com---mmm-cl574.asp
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574                 10/12/2004




Material Safety Data Sheet
Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Disinfecting Office Cleaner CL574
MANUFACTURER: 3M
DIVISION: Stationery & Office Supplies

ADDRESS: 3M Center
St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 10/12/2004
Supercedes Date: 03/23/2004

Document Group: 19-0389-7

Product Use:
Specific Use: Cleaner


SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
WATER 7732-18-5 88 - 93
BUTANE 106-97-8 2- 4
TETRASODIUM ETHYLENEDIAMINETETRAACETATE 64-02-8 1- 3
PROPANE 74-98-6 1- 3
2-BUTOXYETHANOL 111-76-2 1- 3
Lemon Fragrance Trade Secret <1
C12-C18-ALKYL[(ETHYLPHENYL)METHYL]DIMETHYL AMMONIUM 68956-79-6 < 0.1
CHLORIDES
BENZYL-C12-18-ALKYLDIMETHYL AMMONIUM CHLORIDES 68391-01-5 < 0.1



SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: White foaming liquid.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: Flammable liquid and vapor. Closed containers exposed to heat from
fire may build pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back.
May cause target organ effects.


_________________________________________________________________________________________________
Page 1 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004




3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.


Skin Contact:
Prolonged or repeated exposure may cause:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.




Inhalation:
Intentional concentration and inhalation may be harmful or fatal.

Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.

May be absorbed following inhalation and cause target organ effects.


Ingestion:
Ingestion may cause:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.




Target Organ Effects:
Prolonged or repeated exposure may cause:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,
nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.




SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.

Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.

Skin Contact: Wash affected area with soap and water. If signs/symptoms develop, get medical attention.

Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.

If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious
person. Get immediate medical attention.


_________________________________________________________________________________________________
Page 2 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004




SECTION 5: FIRE FIGHTING MEASURES

5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature
00 潞F [Test Method: Closed Cup] [Details: Propellent]
Flash Point
1.1 %
Flammable Limits - LEL
10.6 %
Flammable Limits - UEL


5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).

5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA). Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.

Unusual Fire and Explosion Hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build
pressure and explode. Vapors may travel long distances along the ground or floor to an ignition source and flash back.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.


SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Refer to other sections of this MSDS for information regarding physical and health hazards,
respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information
on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up
by qualified personnel. Remove all ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-
sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to
disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and
could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains and build
dikes to prevent entry into sewer systems or bodies of water. Cover spill area with a fire-extinguishing foam designed for use on
solvents, such as alcohols and acetone, that can dissolve in water. An AR - AFFF type foam is recommended. Working from around
the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in
sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or
flammability hazard. Collect as much of the spilled material as possible using non-sparking tools. Clean up residue with water.
Collect the resulting residue containing solution. Place in a metal container approved for transportation by appropriate authorities.
Seal the container. Dispose of collected material as soon as possible.

In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.



SECTION 7: HANDLING AND STORAGE

7.1 HANDLING
Avoid eye contact with vapors, mists, or spray. Avoid breathing of vapors, mists or spray. Do not eat, drink or smoke when using this
product. Wash exposed areas thoroughly with soap and water. Ground containers securely when transferring contents. Wear low

_________________________________________________________________________________________________
Page 3 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004



static or properly grounded shoes. Do not spray near flames or sources of ignition. Avoid static discharge. Keep away from heat,
sparks, open flame, pilot lights and other sources of ignition. Avoid contact with oxidizing agents.

7.2 STORAGE
Keep container tightly closed. Store away from acids. Store away from heat. Store out of direct sunlight. Store away from oxidizing
agents. Keep container in well-ventilated area.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 ENGINEERING CONTROLS
Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement. Provide appropriate local exhaust
ventilation on open containers.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.

8.2.2 Skin Protection
Avoid skin contact.

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Neoprene.

8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Avoid
breathing of vapors, mists or spray.


8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.

8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
2-BUTOXYETHANOL ACGIH TWA 20 ppm Table A3
2-BUTOXYETHANOL OSHA TWA, Vacated 25 ppm Skin Notation*
2-BUTOXYETHANOL OSHA TWA 50 ppm Skin Notation*; Table Z-1
BUTANE ACGIH TWA 1000 ppm
BUTANE OSHA TWA 800 ppm Table Z-1A
PROPANE ACGIH TWA 1000 ppm
PROPANE OSHA TWA 1000 ppm Table Z-1

* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye,
either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.

VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.

SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline


_________________________________________________________________________________________________
Page 4 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004



OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)



SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

White foaming liquid.
Odor, Color, Grade:
Liquid
General Physical Form:
No Data Available
Autoignition temperature
00 潞F [Test Method: Closed Cup] [Details: Propellent]
Flash Point
1.1 %
Flammable Limits - LEL
10.6 %
Flammable Limits - UEL
<=343 潞F [Details: Liquid portion]
Boiling point
0.97 g/ml
Density
>=1 [Ref Std: AIR=1]
Vapor Density

18 mmHg [@ 68 潞F]
Vapor Pressure

0.97 [Ref Std: WATER=1]
Specific Gravity
7-9
pH
Not Applicable
Melting point
100 %
Solubility In Water




SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.

Materials and Conditions to Avoid: Sparks and/or flames


Hazardous Polymerization: Hazardous polymerization will not occur.


Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion



SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.



SECTION 12: ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION

_________________________________________________________________________________________________
Page 5 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004




Not determined.

CHEMICAL FATE INFORMATION
Not determined.


SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Incinerate in a permitted hazardous waste incinerator. Combustion products will include HCl. Facility
must be capable of handling halogenated materials.
As a disposal alternative, dispose of waste product in a permitted hazardous waste facility.
Dispose of empty product containers in a sanitary landfill.


EPA Hazardous Waste Number (RCRA): D001 (Ignitable)

Since regulations vary, consult applicable regulations or authorities before disposal.


SECTION 14:TRANSPORT INFORMATION
ID Number(s):
70-0712-0156-3, 70-0712-0764-4, 70-0712-2313-8




Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.


SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.


311/312 Hazard Categories:
Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No



Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):

Ingredient C.A.S. No % by Wt
2-BUTOXYETHANOL (GLYCOL ETHERS) 111-76-2 1- 3



STATE REGULATIONS
Contact 3M for more information.




_________________________________________________________________________________________________
Page 6 of 7
3M MATERIAL SAFETY DATA SHEET Disinfecting Office Cleaner CL574 10/12/2004




CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.

Contact 3M for more information.




INTERNATIONAL REGULATIONS
Contact 3M for more information.




This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.


SECTION 16: OTHER INFORMATION


Revision Changes:
Section 14: ID Number(s) was modified.
Section 8: Exposure guidelines ingredient information was modified.
Section 1: Initial issue message was modified.


DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.


3M MSDSs are available at www.3M.com




_________________________________________________________________________________________________
Page 7 of 7

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
oppictures_com---dry_erase.asp 64-17-5 63-63-0
oppictures_com---duc000156001.asp 64742-47-8
oppictures_com---epi-e532.asp N/A
oppictures_com---epie1014.asp N/A
oppictures_com---faldpnxl.asp 811-97-2
oppictures_com---faldpsjc.asp 75-37-6
oppictures_com---faldpsxl.asp 75-37-6
oppictures_com---fkl-f195022.asp 111-77-3 25085-34-1
oppictures_com---gec1a3000b01.asp N/A
oppictures_com---gojodeluxelotionsoapwmoisturizers.asp N/A
oppictures_com---gojoenrichedlotionsoap.asp 141-43-5 112-80-1
oppictures_com---gojofastwipes.asp 64-17-5 5989-27-5
oppictures_com---gojolotionskincleanser.asp 151-21-3 12125-02-9
oppictures_com---gojonaturalorangepumicehandcleaner.asp 5989-27-5
oppictures_com---gojoorangepumicehandcleaner.asp 8002-05-9 1310-73-2 57-55-6 5989-27-5
oppictures_com---gojoultramildantimicrobiallotionsoapwpcmx.asp 141-43-5 112-80-1
oppictures_com---hun-375.asp N/A
oppictures_com---hun-e301.asp N/A
oppictures_com---itw-90130ea.asp 111-76-2 628-63-7 107-98-2
oppictures_com---itw33632.asp 25155-30-0
oppictures_com---itw_90130ct.asp 111-76-2 107-98-2 106-65-0 1119-40-0 627-93-0 628-63-7 624-41-9
oppictures_com---joj-3601.asp N/A
oppictures_com---joj-3684.asp 107-64-2
oppictures_com---joj_1457.asp 07-05-2
oppictures_com---lan1170186.asp 25036-16-2 1333-86-4 9003-07-0 25869-00-5
oppictures_com---loc-01-06983.asp 7085-85-0
oppictures_com---mei41042.asp N/A
oppictures_com---mmm-cl564.asp 7732-18-5 68424-95-3 68424-85-1
oppictures_com---mmm-cl574.asp 7732-18-5 106-97-8 64-02-8 74-98-6 111-76-2 68956-79-6 68391-01-5
oppictures_com---mmm_557bl.asp N/A
oppictures_com---mmm_8003sk4.asp 25038-59-9 25155-30-0 24980-41-4 51580-86-0 1300-72-7 7757-82-6
oppictures_com---mmm_ip900.asp N/A
oppictures_com---mnl0937401.asp 1333-86-4
oppictures_com---mnl8916402.asp 1333-86-4 7631-86-9
oppictures_com---mnl8932602.asp 1333-86-4
oppictures_com---mnl8932702.asp 1333-86-4
oppictures_com---mot40701.asp N/A
oppictures_com---msdslubriderm..asp 8042-47-5 36653-82-4 123-94-4 8006-54-0 57-11-4 50-70-4 139-33-3 99-76-3 94-13-3 120-47-8 94-26-8 102-71-6 9006-65-9 7732-18-5
oppictures_com---msdsneosporin.asp 1405-20-5 1405-89-6 1405-10-3 8009-03-8 8001-29-4 8001-25-0 7695-91-2 8002-31-1 113-24-6
oppictures_com---msds_sheet.asp N/A
oppictures_com---oki182b.asp N/A
oppictures_com---pag-03259.asp 64-17-5
oppictures_com---pag-33032ea.asp 64-17-5
oppictures_com---pag-45114.asp 64-17-5
oppictures_com---pap56331.asp 13563-67-7
oppictures_com---pennr3a.asp N/A
oppictures_com---penslr3g.asp N/A
oppictures_com---purellhandsanitizerwithaloe.asp 64-17-5 67-63-0
oppictures_com---qrt-51-661200.asp 123-86-4 107-98-1
oppictures_com---rea-rr3530.asp 75-37-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC