**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-48-1 |4-Cyanopyridine | 98 | 202-856-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause severe eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Cool containers with flooding quantities of water
until well after fire is out. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100-48-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Pale -Yellow Solid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 196 deg C @ 760.00mmHg
Freezing/Melting Point: 78.00 - 80.00 deg C
Autoignition Temperature: Not available.
Flash Point: 88 deg C ( 190.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 3.2 g/100ml (16.4 c)
Specific Gravity/Density:
Molecular Formula: C6H4N2
Molecular Weight: 104.11
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong acids - strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 100-48-1 unlisted.
LD50/LC50:
Not available.
CAS# : 110-86-1 Oral, rat: LD50 = 891 mg/kg.; Inhalation, rat: LC50 =
28500 mg/kg/1H.; Dermal, rabbit: LD50 = 1121
Carcinogenicity:
4-Cyanopyridine -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 100-48-1: 1
Canada
CAS# 100-48-1 is listed on Canada's DSL List.
CAS# 100-48-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-48-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/20/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Succinamic Acid, 97%
| 638-32-4 |
|
Indole-6-Carboxylic Acid, 98+% (titr., dried basis)
| 1670-72-2 |
|
Methyl 2,2,2-Trichloroacetimidate, 98%
| 2533-69-9 |
|
(2R)-2-Boc-Amino-3-Phenylsulfonyl-1-(2-Tetrahydropyranyloxy)Propane,
| 0-01-1 |
|
2-Bromoethyl chloroformate, 97%
| 4801-27-8 |
|
4-Nitrobenzyl alcohol, 99%
| 619-73-8 |
|
4-Chlorotoluene, 98%
| 106-43-4 |
|
1,4-Dioxane-d8, 99 atom % D
| 123-91-1 |
|
1-Bromo-3-fluoropropane
| 352-91-0 |
|
(-)-Corey lactone benzoate
| 7732-18-5 |
|
4-Methoxy-3-buten-2-one, Tech., 90% (GC)
| 4652-27-1 |
|
1,2-Bis(diphenylphosphino)ethane
| 1663-45-2 |
|
Alpha, Alpha, Alpha-Tribromoquinaldine, 98+%
| 613-53-6 |
|
Methyl hydrazinocarboxylate, 97%
| 6294-89-9 |
|
2,6-Dinitroaniline, 97%
| 606-22-4 |
|
Alpha, Alpha-Dichlorotoluene, 95% (GC)
| 98-87-3 |
|
D-(+)-Turanose, 98%
| 547-25-1 |
|
Guanine Hydrochloride, 97% (UV-Vis)
| 635-39-2 |
|
Normal-Butylbenzene, 99+%
| 104-51-8 |
|
4-Cyanopyridine, 98%
| 100-48-1 |
|
1-Fluoro-3-nitrobenzene, 97%
| 402-67-5 |
|
(3-Cyanopropyl)trichlorosilane, 99+%
| 1071-27-8 |
|
Cholesteryl Myristate, Liquid Crystal, 97%
| 1989-52-2 |
|
4-Chloro-1,8-Naphthalic Anhydride, Tech., Contains ca 50% Moisture
| 4053-08-1 |
|
6-(Chloromethyl)uracil, 98%
| 18592-13-7 |
|
4,4'-Dipyridyl, 98%, Anhydrous
| 553-26-4 |
|
Aq 55s
| |
|
4-??n-(P-Methoxybenzylidene)Amino??Phenyl Acetate
| 10484-13-6 |
|
Tetraheptylammonium Iodide, 99% (Titr.)
| 3535-83-9 |
|
Abietic Acid, Tech., 85+% (titr.)
| 514-10-3 |
|
1,2,3,4-Tetrahydroquinoline, 98%
| 635-46-1 |
|
Fast Blue RR Salt
| 27766-45-6 |
|
6-Chloro-2,4-Dinitroaniline, 97%
| 3531-19-9 |
|
Tetrahexylammonium chloride
| 5922-92-9 |
|
3-Methyl-2-Nitrobenzyl Alcohol, 98%
| 80866-76-8 |
|
p-Fluorophenoxy-ethylbromide 95%
| 332-48-9 |
|
2-Chloro-2,2-diphenylacetyl chloride, 97%
| 2902-98-9 |
|
17-Methyltestosterone, 97.0-103.0% (on dry substance)
| 58-18-4 |
|
4-Fluorobenzoyl Chloride, 98%
| 403-43-0 |
|
3-Fluorophenol, 98%
| 372-20-3 |
|
1-(3-Dimethylaminopropyl)-3-Ethyl-Carbodiimide Hydrochloride, 98+%
| 25952-53-8 |
|
Poly(ethylene), Chlorosulfonated (contains 43% Cl, 1.1% S)
| 68037-39-8 |
|
2-Lepidylmalondialdehyde Sesquihydrate, 95%
| |
|
5-Bromosalicylaldehyde, 98%
| 1761-61-1 |
|
4-Morpholinobenzophenone, 99%
| 24758-49-4 |
|
Difurfurylsulfide, 96%
| 13678-67-6 |
|
3-(4-Fluorobenzoyl)-Propionic Acid, 97%
| 366-77-8 |
|
2-Formylphenoxyacetic acid, 98%
| 6280-80-4 |
|
3-Pentanol, 98%
| 584-02-1 |
|
Triphenylbismuth, 98% (GC)
| 603-33-8 |
|
|