Search   
MSDS 
:
 2-Lepidylmalondialdehyde Sesquihydrate, 95%
CAS 
:
 
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause cardiac disturbances. May cause central nervous
system effects. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. May cause abdominal
pain, nausea, vomiting, and inflammation of the gums and mouth.
Aspiration may lead to pulmonary edema. May cause cardiac
abnormalities. May cause systemic effects. May cause Central Nervous
System Effects characterized by apathy, mental confusion, blurred
vision, and tremors.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Use water spray to keep fire-exposed containers cool. Forms
peroxides of unknown stability. Runoff from fire control or dilution
water may cause pollution.
Extinguishing Media:
Use water spray or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Use only in a chemical fume hood. Discard
contaminated shoes.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 150 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 226.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May form unstable
peroxides.
Conditions to Avoid:
High temperatures, dust generation, excess heat.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
No CAS#s in product.
LD50/LC50:
Carcinogenicity:

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
US FEDERAL
TSCA

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Succinamic Acid, 97% 638-32-4
Indole-6-Carboxylic Acid, 98+% (titr., dried basis) 1670-72-2
Methyl 2,2,2-Trichloroacetimidate, 98% 2533-69-9
(2R)-2-Boc-Amino-3-Phenylsulfonyl-1-(2-Tetrahydropyranyloxy)Propane, 0-01-1
2-Bromoethyl chloroformate, 97% 4801-27-8
4-Nitrobenzyl alcohol, 99% 619-73-8
4-Chlorotoluene, 98% 106-43-4
1,4-Dioxane-d8, 99 atom % D 123-91-1
1-Bromo-3-fluoropropane 352-91-0
(-)-Corey lactone benzoate 7732-18-5
4-Methoxy-3-buten-2-one, Tech., 90% (GC) 4652-27-1
1,2-Bis(diphenylphosphino)ethane 1663-45-2
Alpha, Alpha, Alpha-Tribromoquinaldine, 98+% 613-53-6
Methyl hydrazinocarboxylate, 97% 6294-89-9
2,6-Dinitroaniline, 97% 606-22-4
Alpha, Alpha-Dichlorotoluene, 95% (GC) 98-87-3
D-(+)-Turanose, 98% 547-25-1
Guanine Hydrochloride, 97% (UV-Vis) 635-39-2
Normal-Butylbenzene, 99+% 104-51-8
4-Cyanopyridine, 98% 100-48-1
1-Fluoro-3-nitrobenzene, 97% 402-67-5
(3-Cyanopropyl)trichlorosilane, 99+% 1071-27-8
Cholesteryl Myristate, Liquid Crystal, 97% 1989-52-2
4-Chloro-1,8-Naphthalic Anhydride, Tech., Contains ca 50% Moisture 4053-08-1
6-(Chloromethyl)uracil, 98% 18592-13-7
4,4'-Dipyridyl, 98%, Anhydrous 553-26-4
Aq 55s
4-??n-(P-Methoxybenzylidene)Amino??Phenyl Acetate 10484-13-6
Tetraheptylammonium Iodide, 99% (Titr.) 3535-83-9
Abietic Acid, Tech., 85+% (titr.) 514-10-3
1,2,3,4-Tetrahydroquinoline, 98% 635-46-1
Fast Blue RR Salt 27766-45-6
6-Chloro-2,4-Dinitroaniline, 97% 3531-19-9
Tetrahexylammonium chloride 5922-92-9
3-Methyl-2-Nitrobenzyl Alcohol, 98% 80866-76-8
p-Fluorophenoxy-ethylbromide 95% 332-48-9
2-Chloro-2,2-diphenylacetyl chloride, 97% 2902-98-9
17-Methyltestosterone, 97.0-103.0% (on dry substance) 58-18-4
4-Fluorobenzoyl Chloride, 98% 403-43-0
3-Fluorophenol, 98% 372-20-3
1-(3-Dimethylaminopropyl)-3-Ethyl-Carbodiimide Hydrochloride, 98+% 25952-53-8
Poly(ethylene), Chlorosulfonated (contains 43% Cl, 1.1% S) 68037-39-8
2-Lepidylmalondialdehyde Sesquihydrate, 95%
5-Bromosalicylaldehyde, 98% 1761-61-1
4-Morpholinobenzophenone, 99% 24758-49-4
Difurfurylsulfide, 96% 13678-67-6
3-(4-Fluorobenzoyl)-Propionic Acid, 97% 366-77-8
2-Formylphenoxyacetic acid, 98% 6280-80-4
3-Pentanol, 98% 584-02-1
Triphenylbismuth, 98% (GC) 603-33-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net