**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 402-67-5 |1-Fluoro-3-nitrobenzene, 97% | | 206-953-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be absorbed through the skin.
Absorption into the body may cause cyanosis (bluish discoloration of
skin due to deficient oxygenation of the blood). Effects may be
delayed.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes effects similar to those of acute skin absorption.
Effects may be delayed 2 to 4 hours.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Laboratory experiments have resulted in mutagenic effects.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
For methemoglobinemia, administer oxygen alone or with Methylene
Blue depending on the methemoglobin concentration in the blood.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Combustible
liquid. Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Remove all sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 402-67-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: clear brown
Odor: None reported.
pH: Not available.
Vapor Pressure: 5.5 mm Hg @ 70 C
Viscosity: Not available.
Boiling Point: 214 - 216 deg C
Freezing/Melting Point: 27 deg C
Autoignition Temperature: Not available.
Flash Point: 83 deg C ( 181.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.34
Molecular Formula: C6H4FNO2
Molecular Weight: 141.10
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, hydrogen fluoride gas, nitrogen, fluoride
fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 402-67-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Fluoro-3-nitrobenzene, 97% -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 402-67-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 402-67-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 402-67-5 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 4/09/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Succinamic Acid, 97%
| 638-32-4 |
|
Indole-6-Carboxylic Acid, 98+% (titr., dried basis)
| 1670-72-2 |
|
Methyl 2,2,2-Trichloroacetimidate, 98%
| 2533-69-9 |
|
(2R)-2-Boc-Amino-3-Phenylsulfonyl-1-(2-Tetrahydropyranyloxy)Propane,
| 0-01-1 |
|
2-Bromoethyl chloroformate, 97%
| 4801-27-8 |
|
4-Nitrobenzyl alcohol, 99%
| 619-73-8 |
|
4-Chlorotoluene, 98%
| 106-43-4 |
|
1,4-Dioxane-d8, 99 atom % D
| 123-91-1 |
|
1-Bromo-3-fluoropropane
| 352-91-0 |
|
(-)-Corey lactone benzoate
| 7732-18-5 |
|
4-Methoxy-3-buten-2-one, Tech., 90% (GC)
| 4652-27-1 |
|
1,2-Bis(diphenylphosphino)ethane
| 1663-45-2 |
|
Alpha, Alpha, Alpha-Tribromoquinaldine, 98+%
| 613-53-6 |
|
Methyl hydrazinocarboxylate, 97%
| 6294-89-9 |
|
2,6-Dinitroaniline, 97%
| 606-22-4 |
|
Alpha, Alpha-Dichlorotoluene, 95% (GC)
| 98-87-3 |
|
D-(+)-Turanose, 98%
| 547-25-1 |
|
Guanine Hydrochloride, 97% (UV-Vis)
| 635-39-2 |
|
Normal-Butylbenzene, 99+%
| 104-51-8 |
|
4-Cyanopyridine, 98%
| 100-48-1 |
|
1-Fluoro-3-nitrobenzene, 97%
| 402-67-5 |
|
(3-Cyanopropyl)trichlorosilane, 99+%
| 1071-27-8 |
|
Cholesteryl Myristate, Liquid Crystal, 97%
| 1989-52-2 |
|
4-Chloro-1,8-Naphthalic Anhydride, Tech., Contains ca 50% Moisture
| 4053-08-1 |
|
6-(Chloromethyl)uracil, 98%
| 18592-13-7 |
|
4,4'-Dipyridyl, 98%, Anhydrous
| 553-26-4 |
|
Aq 55s
| |
|
4-??n-(P-Methoxybenzylidene)Amino??Phenyl Acetate
| 10484-13-6 |
|
Tetraheptylammonium Iodide, 99% (Titr.)
| 3535-83-9 |
|
Abietic Acid, Tech., 85+% (titr.)
| 514-10-3 |
|
1,2,3,4-Tetrahydroquinoline, 98%
| 635-46-1 |
|
Fast Blue RR Salt
| 27766-45-6 |
|
6-Chloro-2,4-Dinitroaniline, 97%
| 3531-19-9 |
|
Tetrahexylammonium chloride
| 5922-92-9 |
|
3-Methyl-2-Nitrobenzyl Alcohol, 98%
| 80866-76-8 |
|
p-Fluorophenoxy-ethylbromide 95%
| 332-48-9 |
|
2-Chloro-2,2-diphenylacetyl chloride, 97%
| 2902-98-9 |
|
17-Methyltestosterone, 97.0-103.0% (on dry substance)
| 58-18-4 |
|
4-Fluorobenzoyl Chloride, 98%
| 403-43-0 |
|
3-Fluorophenol, 98%
| 372-20-3 |
|
1-(3-Dimethylaminopropyl)-3-Ethyl-Carbodiimide Hydrochloride, 98+%
| 25952-53-8 |
|
Poly(ethylene), Chlorosulfonated (contains 43% Cl, 1.1% S)
| 68037-39-8 |
|
2-Lepidylmalondialdehyde Sesquihydrate, 95%
| |
|
5-Bromosalicylaldehyde, 98%
| 1761-61-1 |
|
4-Morpholinobenzophenone, 99%
| 24758-49-4 |
|
Difurfurylsulfide, 96%
| 13678-67-6 |
|
3-(4-Fluorobenzoyl)-Propionic Acid, 97%
| 366-77-8 |
|
2-Formylphenoxyacetic acid, 98%
| 6280-80-4 |
|
3-Pentanol, 98%
| 584-02-1 |
|
Triphenylbismuth, 98% (GC)
| 603-33-8 |
|
|