Search   
MSDS 
:
 Phosphorus Pentachloride, Reagent (Crystals)
CAS 
:
 10026-13-8
SYNONYMS 
:
 Phosphorus Perchloride; Phosphoric Chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10026-13-8 |Phosphorus Pentachloride | 100.0 | 233-060-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34 37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns. Irritating to respiratory
system.Corrosive.Water-Reactive.

Potential Health Effects
Eye:
Causes severe eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes digestive tract burns with immediate pain, swelling of the
throat, convulsions, and possible coma. May be harmful if swallowed.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Wash clothing before reuse. Destroy contaminated
shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately. Call a poison
control center.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water
Reactive. Material will react with water and may release a flammable
and/or toxic gas. Use extinguishing media appropriate to the
surrounding fire. Substance is noncombustible. Contact with water can
cause violent liberation of heat and splattering of the material.
Extinguishing Media:
Do NOT use water directly on fire. Substance is noncombustible; use
agent most appropriate to extinguish surrounding fire. If water is
the only media available, use in flooding amounts. Use carbon dioxide
or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Minimize
dust generation and accumulation. Follow all MSDS and label
precautions even after container is emptied because they may contain
product residues. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Do not allow
contact with water.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Corrosives area. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: solid
Appearance: white to pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 167 deg C
Autoignition Temperature: Noncombustible
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Reacts with water.
Specific Gravity/Density: Not available.
Molecular Formula: PCl5
Molecular Weight: 208.2388

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, contact with water.
Incompatibilities with Other Materials:
Reacts violently with water. Alcohols, amines, aluminum, sodium,
potassium acids.
Hazardous Decomposition Products:
Hydrogen chloride, oxides of phosphorus, irritating and toxic fumes
and gases, phosphorous fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10026-13-8: TB6125000
LD50/LC50:
CAS# 10026-13-8: Inhalation, rat: LC50 = 205 mg/m3; Oral, rat: LD50
= 660 mg/kg.
Carcinogenicity:
Phosphorus Pentachloride -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
R 37 Irritating to respiratory system.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10026-13-8: 1
United Kingdom Occupational Exposure Limits
CAS# 10026-13-8: OES-United Kingdom, TWA 0.1 ppm TWA; 0.87 mg/m3 TWA

Canada
CAS# 10026-13-8 is listed on Canada's DSL List.
CAS# 10026-13-8 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 10026-13-8: OEL-AUSTRALIA:TWA 0.1 ppm (1 mg/m3)
OEL-BELGIUM:TWA 0.1 ppm (0.85 mg/m3)
OEL-DENMARK:TWA 1 mg/m3
OEL-FINLAND:STEL 1 mg/m3;Skin
OEL-FRANCE:TWA 0.1 ppm (1 mg/m3)
OEL-GERMANY:TWA 1 mg/m3
OEL-JAPAN:TWA 0.1 ppm (0.85 mg/m3)
OEL-THE NETHERLANDS:TWA 1 mg/m3
OEL-THE PHILIPPINES:TWA 1 mg/m3
OEL-POLAND:TWA 0.3 mg/m3
OEL-RUSSIA:TWA 0.1 ppm;STEL 0.2 mg/m3;Skin
OEL-SWITZERLAND:TWA 1 mg/m3;STEL 2 mg/m3
OEL-THAILAND:TWA 1 mg/m3
OEL-TURKEY:TWA 1 mg/m3
OEL-UNITED KINGDOM:TWA 0.1 ppm (1 mg/m3)
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 10026-13-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/13/1999 Revision #2 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Platinum on calcium carbonate (5% pt) 471-34-1
Myricetin, 95% 529-44-2
3,3-Diphenylpropylamine, 98% 5586-73-2
2,4,5-Trimethoxycinnamic Acid, 98+% Trans 24160-53-0
Bacitracin, zinc salt, potency min. 60 units/mg (on the dry 1405-89-6
Pyrithyldione 98% 77-04-3
cis-1,2,3,6-Tetrahydrophthalic anhydride, 98% 935-79-5
2,4,6-Triaminopyrimidine, 97% 1004-38-2
4-Acetylpiperidine Hydrochloride, 98% 0-00-1
3-Chloro-Benzophenone, 99+% 1016-78-0
p-Tolyl isocyanate, 99% 622-58-2
Allylthiourea, 98% 109-57-9
Tetramethylammonium Fluoride Tetrahydrate, 98% 17787-40-5
N,N-Diethylhydroxylamine, 97% 3710-84-7
Aceanthrenequinone, 99+% 6373-11-1
2-Methyl-1-hexene, 98% 6094-02-6
Borane-methyl sulfide complex 13292-87-0
Acetylcholine Iodide, 99% (Titr.) 2260-50-6
Cobalt phthalocyanine 3317-67-7
2,4,4-Trimethyl-2-pentene, 98% 107-40-4
Gamma-Undecalactone, 98% 104-67-6
2,3-Dihydroimidazo(2,1-b)Benzothiazol-6- Amine, 90% (Titr.) 78291-99-3
3,4-Dichlorobenzylamine, 98% 102-49-8
Trifluoroacetic acid 2,2,2-trifluoroethyl ester, 99+% 407-38-5
3,5-Dimethylpyrazole, 98.5% 67-51-6
5-Chloroindole, 99% 17422-32-1
3,4-Dibromothiophene, 97% 3141-26-2
4,5,6-Triaminopyrimidine Sulfate Hydrate, 97% 6640-23-9
(S,S)-(+)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 93621-94-4
DL-Camphor, 98% 76-22-2
3-Bromobenzyl alcohol, 99% 15852-73-0
Formaldoxime hydrochloride, 99% (titr.) 3473-11-8
N-Phenyl Di-P-Tolylamine, 97% (GC) 20440-95-3
Poly(vinyl acetate), Secondary Standard, Molecular Weight Series 9003-20-7
Isopropyl beta-D-Thiogalactopyranoside, contains ca. 15% 1,4-Dioxane 123-91-1
Phosphorus Pentachloride, Reagent (Crystals) 10026-13-8
Beryllium fluoride, 98.5+% 7787-49-7
Cholesteryl Oleyl Carbonate, 99+%(TLC) 17110-51-9
Phenylacetone, 99+% 103-79-7
2-Amino-9-Fluorenone 3096-57-9
3,3-Tetramethyleneglutaric Acid, 99% 16713-66-9
Dimethyl Suberimidate Dihydrochloride, 99% 34490-86-3
5-Fluoro-1-indanone, 98% 700-84-5
2,3,5,6-Tetrabromo-4-Methyl-4-Nitrocyclo-Hexa-2,5-Dienone, 97% 95111-49-2
3'-Bromoacetophenone, 97% 2142-63-4
3,5-bis(trifluoromethyl)benzoic acid, 98% 725-89-3
1-Amino-1-cyclohexanecarboxylic acid, 98% 2756-85-6
Methyl Dichlorophosphite, 98% 3279-26-3
1-Chloro-3-Tosylamido-7-Amino-2-Heptanone Hydrochloride, 98% 4238-41-9
Reserpine, 97% (UV-Vis) 50-55-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net