Search   
MSDS 
:
 2-Methyl-1-hexene, 98%
CAS 
:
 6094-02-6
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6094-02-6 |2-Methyl-1-hexene | 98% | 228-041-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 10 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Highly flammable. Irritating to eyes, respiratory system
and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May cause dermatitis. May cause cyanosis of
the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation.
Inhalation may produce burning sensation, coughing, wheezing,
laryngitis, shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. May be ignited by heat, sparks, and
flame.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT use straight streams of water. Cool containers
with flooding quantities of water until well after fire is out. Use
water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Cover with an activated carbon adsorbent and place into a closed
container for disposal. Remove all sources of ignition. Use a
spark-proof tool. Flush spill area with water. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation. Use with adequate
ventilation. Wash clothing before reuse. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 6094-02-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 92 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: -6 deg C ( 21.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Not available.
Specific Gravity/Density: .6970g/cm3
Molecular Formula: C7H14
Molecular Weight: 98.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6094-02-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methyl-1-hexene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 10 Flammable.
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 6094-02-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6094-02-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6094-02-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/26/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Platinum on calcium carbonate (5% pt) 471-34-1
Myricetin, 95% 529-44-2
3,3-Diphenylpropylamine, 98% 5586-73-2
2,4,5-Trimethoxycinnamic Acid, 98+% Trans 24160-53-0
Bacitracin, zinc salt, potency min. 60 units/mg (on the dry 1405-89-6
Pyrithyldione 98% 77-04-3
cis-1,2,3,6-Tetrahydrophthalic anhydride, 98% 935-79-5
2,4,6-Triaminopyrimidine, 97% 1004-38-2
4-Acetylpiperidine Hydrochloride, 98% 0-00-1
3-Chloro-Benzophenone, 99+% 1016-78-0
p-Tolyl isocyanate, 99% 622-58-2
Allylthiourea, 98% 109-57-9
Tetramethylammonium Fluoride Tetrahydrate, 98% 17787-40-5
N,N-Diethylhydroxylamine, 97% 3710-84-7
Aceanthrenequinone, 99+% 6373-11-1
2-Methyl-1-hexene, 98% 6094-02-6
Borane-methyl sulfide complex 13292-87-0
Acetylcholine Iodide, 99% (Titr.) 2260-50-6
Cobalt phthalocyanine 3317-67-7
2,4,4-Trimethyl-2-pentene, 98% 107-40-4
Gamma-Undecalactone, 98% 104-67-6
2,3-Dihydroimidazo(2,1-b)Benzothiazol-6- Amine, 90% (Titr.) 78291-99-3
3,4-Dichlorobenzylamine, 98% 102-49-8
Trifluoroacetic acid 2,2,2-trifluoroethyl ester, 99+% 407-38-5
3,5-Dimethylpyrazole, 98.5% 67-51-6
5-Chloroindole, 99% 17422-32-1
3,4-Dibromothiophene, 97% 3141-26-2
4,5,6-Triaminopyrimidine Sulfate Hydrate, 97% 6640-23-9
(S,S)-(+)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 93621-94-4
DL-Camphor, 98% 76-22-2
3-Bromobenzyl alcohol, 99% 15852-73-0
Formaldoxime hydrochloride, 99% (titr.) 3473-11-8
N-Phenyl Di-P-Tolylamine, 97% (GC) 20440-95-3
Poly(vinyl acetate), Secondary Standard, Molecular Weight Series 9003-20-7
Isopropyl beta-D-Thiogalactopyranoside, contains ca. 15% 1,4-Dioxane 123-91-1
Phosphorus Pentachloride, Reagent (Crystals) 10026-13-8
Beryllium fluoride, 98.5+% 7787-49-7
Cholesteryl Oleyl Carbonate, 99+%(TLC) 17110-51-9
Phenylacetone, 99+% 103-79-7
2-Amino-9-Fluorenone 3096-57-9
3,3-Tetramethyleneglutaric Acid, 99% 16713-66-9
Dimethyl Suberimidate Dihydrochloride, 99% 34490-86-3
5-Fluoro-1-indanone, 98% 700-84-5
2,3,5,6-Tetrabromo-4-Methyl-4-Nitrocyclo-Hexa-2,5-Dienone, 97% 95111-49-2
3'-Bromoacetophenone, 97% 2142-63-4
3,5-bis(trifluoromethyl)benzoic acid, 98% 725-89-3
1-Amino-1-cyclohexanecarboxylic acid, 98% 2756-85-6
Methyl Dichlorophosphite, 98% 3279-26-3
1-Chloro-3-Tosylamido-7-Amino-2-Heptanone Hydrochloride, 98% 4238-41-9
Reserpine, 97% (UV-Vis) 50-55-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net