Search   
MSDS 
:
 cis-1,2,3,6-Tetrahydrophthalic anhydride, 98%
CAS 
:
 935-79-5
SYNONYMS 
:
 Cis-4-Cyclohexene-1,2-Dicarboxylic Anhydride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 935-79-5 |Cis-1,2,3,6-Tetrahydrophthalic Anhydri| 98% | 213-308-7 |
| |de | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 34 36/37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns. Irritating to eyes and respiratory system.Moisture
sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. Exposure may produce
metabolic acidosis.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Contact with water forms corrosive vapors. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For large fires, use water spray, fog or
alcohol-resistant foam. Do NOT use straight streams of water. For
small fires, use carbon dioxide, dry chemical, dry sand, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Do not allow contact with water. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 935-79-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 101.00 - 102.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 156 deg C ( 312.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts
Specific Gravity/Density:
Molecular Formula: C8H8O3
Molecular Weight: 152.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May decompose on
exposure to moist air or water.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 935-79-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cis-1,2,3,6-Tetrahydrophthalic Anhydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TETRAHYDROPHTHALIC ANHYDRIDES
Hazard Class: 8
UN Number: 2698
Packing Group: III
IMO
Shipping Name: TETRAHYDROPHTHALIC ANHYDRIDES
Hazard Class: 8
UN Number: 2698
Packing Group: III
RID/ADR
Shipping Name: TETRAHYDROPHTHALIC ANHYDRIDES
Hazard Class: 8
UN Number: 2698
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 34 Causes burns.
R 36/37 Irritating to eyes and respiratory system.
Safety Phrases:
S 25 Avoid contact with eyes.
WGK (Water Danger/Protection)
CAS# 935-79-5: No information available.
Canada
CAS# 935-79-5 is listed on Canada's NDSL List.
CAS# 935-79-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 935-79-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Platinum on calcium carbonate (5% pt) 471-34-1
Myricetin, 95% 529-44-2
3,3-Diphenylpropylamine, 98% 5586-73-2
2,4,5-Trimethoxycinnamic Acid, 98+% Trans 24160-53-0
Bacitracin, zinc salt, potency min. 60 units/mg (on the dry 1405-89-6
Pyrithyldione 98% 77-04-3
cis-1,2,3,6-Tetrahydrophthalic anhydride, 98% 935-79-5
2,4,6-Triaminopyrimidine, 97% 1004-38-2
4-Acetylpiperidine Hydrochloride, 98% 0-00-1
3-Chloro-Benzophenone, 99+% 1016-78-0
p-Tolyl isocyanate, 99% 622-58-2
Allylthiourea, 98% 109-57-9
Tetramethylammonium Fluoride Tetrahydrate, 98% 17787-40-5
N,N-Diethylhydroxylamine, 97% 3710-84-7
Aceanthrenequinone, 99+% 6373-11-1
2-Methyl-1-hexene, 98% 6094-02-6
Borane-methyl sulfide complex 13292-87-0
Acetylcholine Iodide, 99% (Titr.) 2260-50-6
Cobalt phthalocyanine 3317-67-7
2,4,4-Trimethyl-2-pentene, 98% 107-40-4
Gamma-Undecalactone, 98% 104-67-6
2,3-Dihydroimidazo(2,1-b)Benzothiazol-6- Amine, 90% (Titr.) 78291-99-3
3,4-Dichlorobenzylamine, 98% 102-49-8
Trifluoroacetic acid 2,2,2-trifluoroethyl ester, 99+% 407-38-5
3,5-Dimethylpyrazole, 98.5% 67-51-6
5-Chloroindole, 99% 17422-32-1
3,4-Dibromothiophene, 97% 3141-26-2
4,5,6-Triaminopyrimidine Sulfate Hydrate, 97% 6640-23-9
(S,S)-(+)-2,5-Bis(Methoxymethyl)Pyrrolidine, 96% 93621-94-4
DL-Camphor, 98% 76-22-2
3-Bromobenzyl alcohol, 99% 15852-73-0
Formaldoxime hydrochloride, 99% (titr.) 3473-11-8
N-Phenyl Di-P-Tolylamine, 97% (GC) 20440-95-3
Poly(vinyl acetate), Secondary Standard, Molecular Weight Series 9003-20-7
Isopropyl beta-D-Thiogalactopyranoside, contains ca. 15% 1,4-Dioxane 123-91-1
Phosphorus Pentachloride, Reagent (Crystals) 10026-13-8
Beryllium fluoride, 98.5+% 7787-49-7
Cholesteryl Oleyl Carbonate, 99+%(TLC) 17110-51-9
Phenylacetone, 99+% 103-79-7
2-Amino-9-Fluorenone 3096-57-9
3,3-Tetramethyleneglutaric Acid, 99% 16713-66-9
Dimethyl Suberimidate Dihydrochloride, 99% 34490-86-3
5-Fluoro-1-indanone, 98% 700-84-5
2,3,5,6-Tetrabromo-4-Methyl-4-Nitrocyclo-Hexa-2,5-Dienone, 97% 95111-49-2
3'-Bromoacetophenone, 97% 2142-63-4
3,5-bis(trifluoromethyl)benzoic acid, 98% 725-89-3
1-Amino-1-cyclohexanecarboxylic acid, 98% 2756-85-6
Methyl Dichlorophosphite, 98% 3279-26-3
1-Chloro-3-Tosylamido-7-Amino-2-Heptanone Hydrochloride, 98% 4238-41-9
Reserpine, 97% (UV-Vis) 50-55-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net