Search   
MSDS 
:
 3,5-di-tert.-butylcatechol, 99%
CAS 
:
 1020-31-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1020-31-1 |3,5-Di-tert-butylcatechol, 99% | | 213-816-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 1020-31-1:


Personal Protective Equipment

Eyes:
Wear safety glasses and chemical goggles if splashing
is possible.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 96.00 - 99.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H22O2
Molecular Weight: 222.33

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Acid chlorides - acid anhydrides - oxidizing agents - brass - copper,
copper alloys.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1020-31-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,5-Di-tert-butylcatechol, 99% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1020-31-1: No information available.
Canada
CAS# 1020-31-1 is listed on Canada's NDSL List.
CAS# 1020-31-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1020-31-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromo-6-Methoxy Naphthalene 0-00-0
Acrylamide Solution, 40% 79-06-1
Bicyclo(2.2.1)hepta-2,5-diene, 96%, stabilized with 0.05-0.25% BHT 121-46-0
Oleic Anhydride, 95+% (Titr.) 24909-72-6
D-Arabitol, 99% 488-82-4
Buffer pH 10.0 7664-41-7
Dehydrocarnitine Hydrochloride 96+% 10457-99-5
2-Amino-1-benzylbenzimidazole, 99+% 43182-10-1
3,5-di-tert.-butylcatechol, 99% 1020-31-1
Diethyl Citrate, tech 32074-56-9
Rutin Trihydrate, 98% (Titr.) 153-18-4
Custom Oil Standard-Single Element Solution 95-47-6
Acetonitrile, anhydrous, 99.9% 75-05-8
Egg Lecithin 93685-90-6
DL-Isoleucine 443-79-8
Argon 7440-37-1
Acrylamide Solution (40%) 79-06-1
Sym.-Dibenzoylhydrazine 787-84-8
Carbon Monoxide 630-08-0
4M Potassium Chloride Saturated with Silver Chloride 7447-40-7
2,4,5,7-Tetranitro-9-Fluorenone, 98% 746-53-2
Potassium Chloride Solution (Filling Sol'n for pH Electrodes) 7447-40-7
Concentrated Buffer Solution pH 10
Biuret Solution Reagent A 1310-58-3
Boron Trifluoride Ethanol Complex 0-01-1
Bromide Standard 1 Mg/Ml
Barium Perchlorate Trihydrate 10294-39-0
Chlorazol Fast Scarlet Dye 3441-14-3
Pyrazole Sulfone 0-00-0
Iron (II) Disulfide 12068-85-8
4-(2-Hydroxyethyl)-1-piperazinepropane- sulfonic acid, 97% (titr.) 16052-06-5
Kjeldahl Copper Catalyst Tablets 7758-98-7
Kjeldahl Titanium Catalyst Tablets 7757-82-6
Amberlite IRA-402, (Anion Exchange Resin)
2-Butyne-1,4-Diol (Pract) 110-65-6
3-Fluoro-4-methylaniline, 99% 452-77-7
2-Bromo-2-methylpropionyl bromide 20769-85-1
Perspex Chips
Sodium Tetrachloroaurate(III) 13874-02-7
Shellac Orange 9000-59-3
Sodium Cyclamate 139-05-9
Tapers Wax
Trichloroethylene Stabilized with 0.02% Triethylamine 79-01-6
Neryl acetate, 97%, mixt. of ca 55-65% neryl- and 35-45% geranyl 141-12-8
N,N,N',N'-Tetramethyl-p-phenylenediamine, 98% 100-22-1
Crystal Violet Indicator Solution 548-62-9
Nickel(II) Carbonate Tetrahydrate 12244-51-8
Sudan III in 70% Methanol 67-56-1
1-Butanol. HPLC grade, 99.4% 71-36-3
Disperse Blue 3 2475-46-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net