Search   
MSDS 
:
 Sym.-Dibenzoylhydrazine
CAS 
:
 787-84-8
SYNONYMS 
:
 Benzoic Acid, 2-Benzoylhydrazide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 787-84-8 |Benzoic Acid, 2-Benzoylhydrazide | ca 100 | 212-329-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and in contact with skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 787-84-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white to tan
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 238.50 - 240.50 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H12N2O2
Molecular Weight: 240.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 787-84-8: MV2085000
LD50/LC50:
Not available.
Carcinogenicity:
Benzoic Acid, 2-Benzoylhydrazide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21 Harmful by inhalation and in contact with
skin.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 787-84-8: No information available.
Canada
CAS# 787-84-8 is listed on Canada's NDSL List.
CAS# 787-84-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 787-84-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/24/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromo-6-Methoxy Naphthalene 0-00-0
Acrylamide Solution, 40% 79-06-1
Bicyclo(2.2.1)hepta-2,5-diene, 96%, stabilized with 0.05-0.25% BHT 121-46-0
Oleic Anhydride, 95+% (Titr.) 24909-72-6
D-Arabitol, 99% 488-82-4
Buffer pH 10.0 7664-41-7
Dehydrocarnitine Hydrochloride 96+% 10457-99-5
2-Amino-1-benzylbenzimidazole, 99+% 43182-10-1
3,5-di-tert.-butylcatechol, 99% 1020-31-1
Diethyl Citrate, tech 32074-56-9
Rutin Trihydrate, 98% (Titr.) 153-18-4
Custom Oil Standard-Single Element Solution 95-47-6
Acetonitrile, anhydrous, 99.9% 75-05-8
Egg Lecithin 93685-90-6
DL-Isoleucine 443-79-8
Argon 7440-37-1
Acrylamide Solution (40%) 79-06-1
Sym.-Dibenzoylhydrazine 787-84-8
Carbon Monoxide 630-08-0
4M Potassium Chloride Saturated with Silver Chloride 7447-40-7
2,4,5,7-Tetranitro-9-Fluorenone, 98% 746-53-2
Potassium Chloride Solution (Filling Sol'n for pH Electrodes) 7447-40-7
Concentrated Buffer Solution pH 10
Biuret Solution Reagent A 1310-58-3
Boron Trifluoride Ethanol Complex 0-01-1
Bromide Standard 1 Mg/Ml
Barium Perchlorate Trihydrate 10294-39-0
Chlorazol Fast Scarlet Dye 3441-14-3
Pyrazole Sulfone 0-00-0
Iron (II) Disulfide 12068-85-8
4-(2-Hydroxyethyl)-1-piperazinepropane- sulfonic acid, 97% (titr.) 16052-06-5
Kjeldahl Copper Catalyst Tablets 7758-98-7
Kjeldahl Titanium Catalyst Tablets 7757-82-6
Amberlite IRA-402, (Anion Exchange Resin)
2-Butyne-1,4-Diol (Pract) 110-65-6
3-Fluoro-4-methylaniline, 99% 452-77-7
2-Bromo-2-methylpropionyl bromide 20769-85-1
Perspex Chips
Sodium Tetrachloroaurate(III) 13874-02-7
Shellac Orange 9000-59-3
Sodium Cyclamate 139-05-9
Tapers Wax
Trichloroethylene Stabilized with 0.02% Triethylamine 79-01-6
Neryl acetate, 97%, mixt. of ca 55-65% neryl- and 35-45% geranyl 141-12-8
N,N,N',N'-Tetramethyl-p-phenylenediamine, 98% 100-22-1
Crystal Violet Indicator Solution 548-62-9
Nickel(II) Carbonate Tetrahydrate 12244-51-8
Sudan III in 70% Methanol 67-56-1
1-Butanol. HPLC grade, 99.4% 71-36-3
Disperse Blue 3 2475-46-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net