Search   
MSDS 
:
 Oleic Anhydride, 95+% (Titr.)
CAS 
:
 24909-72-6
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 24909-72-6 |Oleic Anhydride | 95+% | 246-522-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Do not allow contact with water. Keep from
contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 24909-72-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow orange
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 200 - 215 deg C @ 11.00mmHg
Freezing/Melting Point: 22.00 - 23.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 199 deg C ( 390.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: negligible
Specific Gravity/Density: .8890g/cm3
Molecular Formula: C36H66O3
Molecular Weight: 546.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. May decompose on exposure to moist air or
water.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 24909-72-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Oleic Anhydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 24909-72-6: No information available.
Canada
CAS# 24909-72-6 is listed on Canada's NDSL List.
CAS# 24909-72-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 24909-72-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromo-6-Methoxy Naphthalene 0-00-0
Acrylamide Solution, 40% 79-06-1
Bicyclo(2.2.1)hepta-2,5-diene, 96%, stabilized with 0.05-0.25% BHT 121-46-0
Oleic Anhydride, 95+% (Titr.) 24909-72-6
D-Arabitol, 99% 488-82-4
Buffer pH 10.0 7664-41-7
Dehydrocarnitine Hydrochloride 96+% 10457-99-5
2-Amino-1-benzylbenzimidazole, 99+% 43182-10-1
3,5-di-tert.-butylcatechol, 99% 1020-31-1
Diethyl Citrate, tech 32074-56-9
Rutin Trihydrate, 98% (Titr.) 153-18-4
Custom Oil Standard-Single Element Solution 95-47-6
Acetonitrile, anhydrous, 99.9% 75-05-8
Egg Lecithin 93685-90-6
DL-Isoleucine 443-79-8
Argon 7440-37-1
Acrylamide Solution (40%) 79-06-1
Sym.-Dibenzoylhydrazine 787-84-8
Carbon Monoxide 630-08-0
4M Potassium Chloride Saturated with Silver Chloride 7447-40-7
2,4,5,7-Tetranitro-9-Fluorenone, 98% 746-53-2
Potassium Chloride Solution (Filling Sol'n for pH Electrodes) 7447-40-7
Concentrated Buffer Solution pH 10
Biuret Solution Reagent A 1310-58-3
Boron Trifluoride Ethanol Complex 0-01-1
Bromide Standard 1 Mg/Ml
Barium Perchlorate Trihydrate 10294-39-0
Chlorazol Fast Scarlet Dye 3441-14-3
Pyrazole Sulfone 0-00-0
Iron (II) Disulfide 12068-85-8
4-(2-Hydroxyethyl)-1-piperazinepropane- sulfonic acid, 97% (titr.) 16052-06-5
Kjeldahl Copper Catalyst Tablets 7758-98-7
Kjeldahl Titanium Catalyst Tablets 7757-82-6
Amberlite IRA-402, (Anion Exchange Resin)
2-Butyne-1,4-Diol (Pract) 110-65-6
3-Fluoro-4-methylaniline, 99% 452-77-7
2-Bromo-2-methylpropionyl bromide 20769-85-1
Perspex Chips
Sodium Tetrachloroaurate(III) 13874-02-7
Shellac Orange 9000-59-3
Sodium Cyclamate 139-05-9
Tapers Wax
Trichloroethylene Stabilized with 0.02% Triethylamine 79-01-6
Neryl acetate, 97%, mixt. of ca 55-65% neryl- and 35-45% geranyl 141-12-8
N,N,N',N'-Tetramethyl-p-phenylenediamine, 98% 100-22-1
Crystal Violet Indicator Solution 548-62-9
Nickel(II) Carbonate Tetrahydrate 12244-51-8
Sudan III in 70% Methanol 67-56-1
1-Butanol. HPLC grade, 99.4% 71-36-3
Disperse Blue 3 2475-46-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net