Search   
MSDS 
:
 Bicyclo(2.2.1)hepta-2,5-diene, 96%, stabilized with 0.05-0.25% BHT
CAS 
:
 121-46-0
SYNONYMS 
:
 2,5-Norbornadiene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 121-46-0 |Bicyclo[2.2.1]hepta-2,5-diene | 96 | 204-472-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Extremely flammable liquid and vapor. Vapor may
cause flash fire. This liquid floats on water and may travel to a
source of ignition and spread fire.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Scoop up with a nonsparking tool,
then place into a suitable container for disposal. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with eyes, skin, and clothing. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Use only with adequate ventilation. Keep away
from heat, sparks and flame. Avoid breathing vapor or mist.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Keep under a nitrogen blanket.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 121-46-0:

Russia: 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Clear
Odor: Not available.
pH: Not available.
Vapor Pressure: 25.5 mm Hg @ 25 deg C
Viscosity: 0.85 mPas 20 deg C
Boiling Point: 89 deg C @ 760 mm Hg
Freezing/Melting Point: -19 deg C
Autoignition Temperature: 350 deg C ( 662.00 deg F)
Flash Point: -12 deg C ( 10.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: .85
Molecular Formula: C7H8
Molecular Weight: 92.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Unstable.
Conditions to Avoid:
Mechanical shock, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, and air.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 121-46-0: RB6535000
LD50/LC50:
CAS# 121-46-0: Inhalation, mouse: LC50 = 27700 ppm/30M; Inhalation,
rat: LC50 = 14100 ppm/8H; Oral, mouse: LD50 = 3850 mg/kg.
Carcinogenicity:
Bicyclo[2.2.1]hepta-2,5-diene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: 2,5-NORBORNADIENE, INHIBITED
Hazard Class: 3
UN Number: 2251
Packing Group: II
IMO
Shipping Name: 2,5-NORBORNADIENE, INHIBITED
Hazard Class: 3.2
UN Number: 2251
Packing Group: II
RID/ADR
Shipping Name: 2,5-NORBORNADIENE, INHIBITED
Hazard Class: 3
UN Number: 2251
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 121-46-0: No information available.
Canada
CAS# 121-46-0 is listed on Canada's NDSL List.
CAS# 121-46-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 121-46-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromo-6-Methoxy Naphthalene 0-00-0
Acrylamide Solution, 40% 79-06-1
Bicyclo(2.2.1)hepta-2,5-diene, 96%, stabilized with 0.05-0.25% BHT 121-46-0
Oleic Anhydride, 95+% (Titr.) 24909-72-6
D-Arabitol, 99% 488-82-4
Buffer pH 10.0 7664-41-7
Dehydrocarnitine Hydrochloride 96+% 10457-99-5
2-Amino-1-benzylbenzimidazole, 99+% 43182-10-1
3,5-di-tert.-butylcatechol, 99% 1020-31-1
Diethyl Citrate, tech 32074-56-9
Rutin Trihydrate, 98% (Titr.) 153-18-4
Custom Oil Standard-Single Element Solution 95-47-6
Acetonitrile, anhydrous, 99.9% 75-05-8
Egg Lecithin 93685-90-6
DL-Isoleucine 443-79-8
Argon 7440-37-1
Acrylamide Solution (40%) 79-06-1
Sym.-Dibenzoylhydrazine 787-84-8
Carbon Monoxide 630-08-0
4M Potassium Chloride Saturated with Silver Chloride 7447-40-7
2,4,5,7-Tetranitro-9-Fluorenone, 98% 746-53-2
Potassium Chloride Solution (Filling Sol'n for pH Electrodes) 7447-40-7
Concentrated Buffer Solution pH 10
Biuret Solution Reagent A 1310-58-3
Boron Trifluoride Ethanol Complex 0-01-1
Bromide Standard 1 Mg/Ml
Barium Perchlorate Trihydrate 10294-39-0
Chlorazol Fast Scarlet Dye 3441-14-3
Pyrazole Sulfone 0-00-0
Iron (II) Disulfide 12068-85-8
4-(2-Hydroxyethyl)-1-piperazinepropane- sulfonic acid, 97% (titr.) 16052-06-5
Kjeldahl Copper Catalyst Tablets 7758-98-7
Kjeldahl Titanium Catalyst Tablets 7757-82-6
Amberlite IRA-402, (Anion Exchange Resin)
2-Butyne-1,4-Diol (Pract) 110-65-6
3-Fluoro-4-methylaniline, 99% 452-77-7
2-Bromo-2-methylpropionyl bromide 20769-85-1
Perspex Chips
Sodium Tetrachloroaurate(III) 13874-02-7
Shellac Orange 9000-59-3
Sodium Cyclamate 139-05-9
Tapers Wax
Trichloroethylene Stabilized with 0.02% Triethylamine 79-01-6
Neryl acetate, 97%, mixt. of ca 55-65% neryl- and 35-45% geranyl 141-12-8
N,N,N',N'-Tetramethyl-p-phenylenediamine, 98% 100-22-1
Crystal Violet Indicator Solution 548-62-9
Nickel(II) Carbonate Tetrahydrate 12244-51-8
Sudan III in 70% Methanol 67-56-1
1-Butanol. HPLC grade, 99.4% 71-36-3
Disperse Blue 3 2475-46-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net