Search   
MSDS 
:
 p-Benzyloxyphenol, 98%
CAS 
:
 103-16-2
SYNONYMS 
:
 PBP; Hydroquinone Monobenzyl Ether; Benzoquin.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 103-16-2 |4-Benzyloxyphenol | 98.0 | 203-083-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause dermatitis.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 103-16-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: slightly brown
Odor: faint odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 121.00 - 123.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 1.26
Molecular Formula: C13H12O2
Molecular Weight: 200.24

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 103-16-2: SJ7700000
LD50/LC50:
Not available.
Carcinogenicity:
4-Benzyloxyphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Bacteria: Phytobacterium phosphoreum: EC50 = 1.63-2.15 mg/L; 5,15,30
Minutes; Microtox test; 15 degrees C

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 103-16-2: No information available.
Canada
CAS# 103-16-2 is listed on Canada's NDSL List.
CAS# 103-16-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 103-16-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/04/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Myristic acid, 99.5+% 544-63-8
Chlorodimethylphenylsilane 95% 768-33-2
2-Amino-5-Methyl-1,3,4-Thiadiazole, 97% 108-33-8
Acetic-d3 acid, sodium salt, 99+ atom % d 39230-37-0
3-Benzoylpyridine, 97% 5424-19-1
p-Propylbenzaldehyde diethyl acetal, 99% 89557-35-7
5-(Trifluoromethyl)-4h-1,2,4-triazole-- 3(2h)-thione hemihydrate, 97% 68744-64-1
4-Dimethylamino-2-Methylazobenzene, 98% (Titr.) 54-88-6
Gallium, 99.9999% 7440-55-3
Hexanoic acid 142-62-1
2,4-Dichloro-alpha-methylbenzyl alcohol 1475-13-4
P-Methylanisole, 96% (GC) 104-93-8
D,l-isoproterenol sulfate dihydrate, 97% 6078-56-4
3,4-Lutidine, 98% 583-58-4
1-(3-Chloropropoxy)-4-fluorobenzene, mixture of chloro- and 1716-42-3
Zinc Nitrate Hexahydrate 10196-18-6
Zinc oxide 1314-13-2
4-Bromothioanisole, 97% 104-95-0
1,2-Bis-(4-Pyridyl)-Ethane, 97% 4916-57-8
4-Nitrophenyl Sulfate, Potassium Salt Monohydrate, 99+% 6217-68-1
Chicago sky blue 6B 2610-05-1
1H-Benzimidazole-5-carboxylic acid, 98% 15788-16-6
Zinc sulfate heptahydrate 7446-20-0
Cellulose Acetate Butyrate, Average M.W. 16000 9004-36-8
Bromoacetaldehyde Diethyl Acetal, 99% (GC) 2032-35-1
2-Methoxyfuran, 97% 25414-22-6
4-Methoxy-1-naphthol, 98+% 84-85-5
4-Methylpyrimidine, 97% 3438-46-8
Mixture of Silicon(IV)Chloride (57.5%) and Chlorotrimethylsilane 75-77-4
5-(4-Methylphenyl)-5-Phenylhydantoin, 99+% 51169-17-6
4-Fluoro-3-nitrobenzotrifluoride, 96% 367-86-2
2,6-Difluoroaniline, 97% 5509-65-9
4-(Diethylamino)butanenitrile, 97% 5336-75-4
Ethylene Sulfide, 98+%, stabilized with 0.5% Butylmercaptane
Cycloheptene, 97% 628-92-2
Tricosanoic Acid, 99% 2433-96-7
2-Amino-P-Cresol, 97% 95-84-1
Isopulegyl acetate, 98%, mixture of isomers 89-49-6
Dimethyl Cis-1,2-Cyclopropanedicarboxylate 98% 826-34-6
Phenolphthalein Complexon 62698-58-2
4-Cyano-9-Fluorenone, 99.5+% 0-00-1
Borane-Triethylamine Complex 1722-26-5
2,6-Dithiopurine 98% 5437-25-2
p-Benzyloxyphenol, 98% 103-16-2
1-Bromonaphthalene 90-11-9
Ethyl 4-Chlorobutyrate, 97+%(GC) 3153-36-4
Hexatriacontane, 98% 630-06-8
Erbium Oxide, 99.99+% 12061-16-4
1,1'-Diethyl-2,2'-Dicarbocyanine Iodide, 99% (UV-Vis) 14187-31-6
2-Nitrobenzyl chloride, 98% 612-23-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net