**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 544-63-8 |Myristic Acid | 99.5+% | 208-875-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 544-63-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 250 deg C
Freezing/Melting Point: 54C-55C
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble in water.
Specific Gravity/Density: 0.8622
Molecular Formula: C14H28O2
Molecular Weight: 228.1948
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 544-63-8: QH4375000
LD50/LC50:
CAS# 544-63-8: Draize test, rabbit, eye: 100 mg Mild; Oral, rat:
LD50 = >10 gm/kg.
Carcinogenicity:
Myristic Acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 544-63-8: 0
Canada
CAS# 544-63-8 is listed on Canada's DSL List.
CAS# 544-63-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 544-63-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/30/1998 Revision #3 Date: 3/04/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Myristic acid, 99.5+%
| 544-63-8 |
|
Chlorodimethylphenylsilane 95%
| 768-33-2 |
|
2-Amino-5-Methyl-1,3,4-Thiadiazole, 97%
| 108-33-8 |
|
Acetic-d3 acid, sodium salt, 99+ atom % d
| 39230-37-0 |
|
3-Benzoylpyridine, 97%
| 5424-19-1 |
|
p-Propylbenzaldehyde diethyl acetal, 99%
| 89557-35-7 |
|
5-(Trifluoromethyl)-4h-1,2,4-triazole-- 3(2h)-thione hemihydrate, 97%
| 68744-64-1 |
|
4-Dimethylamino-2-Methylazobenzene, 98% (Titr.)
| 54-88-6 |
|
Gallium, 99.9999%
| 7440-55-3 |
|
Hexanoic acid
| 142-62-1 |
|
2,4-Dichloro-alpha-methylbenzyl alcohol
| 1475-13-4 |
|
P-Methylanisole, 96% (GC)
| 104-93-8 |
|
D,l-isoproterenol sulfate dihydrate, 97%
| 6078-56-4 |
|
3,4-Lutidine, 98%
| 583-58-4 |
|
1-(3-Chloropropoxy)-4-fluorobenzene, mixture of chloro- and
| 1716-42-3 |
|
Zinc Nitrate Hexahydrate
| 10196-18-6 |
|
Zinc oxide
| 1314-13-2 |
|
4-Bromothioanisole, 97%
| 104-95-0 |
|
1,2-Bis-(4-Pyridyl)-Ethane, 97%
| 4916-57-8 |
|
4-Nitrophenyl Sulfate, Potassium Salt Monohydrate, 99+%
| 6217-68-1 |
|
Chicago sky blue 6B
| 2610-05-1 |
|
1H-Benzimidazole-5-carboxylic acid, 98%
| 15788-16-6 |
|
Zinc sulfate heptahydrate
| 7446-20-0 |
|
Cellulose Acetate Butyrate, Average M.W. 16000
| 9004-36-8 |
|
Bromoacetaldehyde Diethyl Acetal, 99% (GC)
| 2032-35-1 |
|
2-Methoxyfuran, 97%
| 25414-22-6 |
|
4-Methoxy-1-naphthol, 98+%
| 84-85-5 |
|
4-Methylpyrimidine, 97%
| 3438-46-8 |
|
Mixture of Silicon(IV)Chloride (57.5%) and Chlorotrimethylsilane
| 75-77-4 |
|
5-(4-Methylphenyl)-5-Phenylhydantoin, 99+%
| 51169-17-6 |
|
4-Fluoro-3-nitrobenzotrifluoride, 96%
| 367-86-2 |
|
2,6-Difluoroaniline, 97%
| 5509-65-9 |
|
4-(Diethylamino)butanenitrile, 97%
| 5336-75-4 |
|
Ethylene Sulfide, 98+%, stabilized with 0.5% Butylmercaptane
| |
|
Cycloheptene, 97%
| 628-92-2 |
|
Tricosanoic Acid, 99%
| 2433-96-7 |
|
2-Amino-P-Cresol, 97%
| 95-84-1 |
|
Isopulegyl acetate, 98%, mixture of isomers
| 89-49-6 |
|
Dimethyl Cis-1,2-Cyclopropanedicarboxylate 98%
| 826-34-6 |
|
Phenolphthalein Complexon
| 62698-58-2 |
|
4-Cyano-9-Fluorenone, 99.5+%
| 0-00-1 |
|
Borane-Triethylamine Complex
| 1722-26-5 |
|
2,6-Dithiopurine 98%
| 5437-25-2 |
|
p-Benzyloxyphenol, 98%
| 103-16-2 |
|
1-Bromonaphthalene
| 90-11-9 |
|
Ethyl 4-Chlorobutyrate, 97+%(GC)
| 3153-36-4 |
|
Hexatriacontane, 98%
| 630-06-8 |
|
Erbium Oxide, 99.99+%
| 12061-16-4 |
|
1,1'-Diethyl-2,2'-Dicarbocyanine Iodide, 99% (UV-Vis)
| 14187-31-6 |
|
2-Nitrobenzyl chloride, 98%
| 612-23-7 |
|
|