Search   
MSDS 
:
 Isopulegyl acetate, 98%, mixture of isomers
CAS 
:
 89-49-6
SYNONYMS 
:
 Cyclohexanol, 5-methyl-2-(1-methylethenyl)-, acetate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 89-49-6 |Isopulegyl acetate, mixture of isomers| 98 | unlisted |
| | | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use agent most appropriate to extinguish fire. Use
water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 89-49-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 232 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9250g/cm3
Molecular Formula: C12H20O2
Molecular Weight: 196.29

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong acids, strong bases, strong oxidizing agents, strong reducing
agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 89-49-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Isopulegyl acetate, mixture of isomers -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 89-49-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 89-49-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 89-49-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Myristic acid, 99.5+% 544-63-8
Chlorodimethylphenylsilane 95% 768-33-2
2-Amino-5-Methyl-1,3,4-Thiadiazole, 97% 108-33-8
Acetic-d3 acid, sodium salt, 99+ atom % d 39230-37-0
3-Benzoylpyridine, 97% 5424-19-1
p-Propylbenzaldehyde diethyl acetal, 99% 89557-35-7
5-(Trifluoromethyl)-4h-1,2,4-triazole-- 3(2h)-thione hemihydrate, 97% 68744-64-1
4-Dimethylamino-2-Methylazobenzene, 98% (Titr.) 54-88-6
Gallium, 99.9999% 7440-55-3
Hexanoic acid 142-62-1
2,4-Dichloro-alpha-methylbenzyl alcohol 1475-13-4
P-Methylanisole, 96% (GC) 104-93-8
D,l-isoproterenol sulfate dihydrate, 97% 6078-56-4
3,4-Lutidine, 98% 583-58-4
1-(3-Chloropropoxy)-4-fluorobenzene, mixture of chloro- and 1716-42-3
Zinc Nitrate Hexahydrate 10196-18-6
Zinc oxide 1314-13-2
4-Bromothioanisole, 97% 104-95-0
1,2-Bis-(4-Pyridyl)-Ethane, 97% 4916-57-8
4-Nitrophenyl Sulfate, Potassium Salt Monohydrate, 99+% 6217-68-1
Chicago sky blue 6B 2610-05-1
1H-Benzimidazole-5-carboxylic acid, 98% 15788-16-6
Zinc sulfate heptahydrate 7446-20-0
Cellulose Acetate Butyrate, Average M.W. 16000 9004-36-8
Bromoacetaldehyde Diethyl Acetal, 99% (GC) 2032-35-1
2-Methoxyfuran, 97% 25414-22-6
4-Methoxy-1-naphthol, 98+% 84-85-5
4-Methylpyrimidine, 97% 3438-46-8
Mixture of Silicon(IV)Chloride (57.5%) and Chlorotrimethylsilane 75-77-4
5-(4-Methylphenyl)-5-Phenylhydantoin, 99+% 51169-17-6
4-Fluoro-3-nitrobenzotrifluoride, 96% 367-86-2
2,6-Difluoroaniline, 97% 5509-65-9
4-(Diethylamino)butanenitrile, 97% 5336-75-4
Ethylene Sulfide, 98+%, stabilized with 0.5% Butylmercaptane
Cycloheptene, 97% 628-92-2
Tricosanoic Acid, 99% 2433-96-7
2-Amino-P-Cresol, 97% 95-84-1
Isopulegyl acetate, 98%, mixture of isomers 89-49-6
Dimethyl Cis-1,2-Cyclopropanedicarboxylate 98% 826-34-6
Phenolphthalein Complexon 62698-58-2
4-Cyano-9-Fluorenone, 99.5+% 0-00-1
Borane-Triethylamine Complex 1722-26-5
2,6-Dithiopurine 98% 5437-25-2
p-Benzyloxyphenol, 98% 103-16-2
1-Bromonaphthalene 90-11-9
Ethyl 4-Chlorobutyrate, 97+%(GC) 3153-36-4
Hexatriacontane, 98% 630-06-8
Erbium Oxide, 99.99+% 12061-16-4
1,1'-Diethyl-2,2'-Dicarbocyanine Iodide, 99% (UV-Vis) 14187-31-6
2-Nitrobenzyl chloride, 98% 612-23-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net