Search   
MSDS 
:
 Dibenzylamine, 98%
CAS 
:
 103-49-1
SYNONYMS 
:
 N-(Phenylmethyl)benzenemethanamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 103-49-1 |Dibenzylamine | 98 | 203-117-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 21 25 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin. Toxic if swallowed. Irritating to
eyes, respiratory system and skin.Toxic.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Effects of contact may be delayed.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract irritation.
Effects may be delayed.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. If breathing has ceased
apply artificial respiration using oxygen and a suitable mechanical
device such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Water runoff can cause environmental damage. Dike
and collect water used to fight fire. During a fire, irritating and
highly toxic gases may be generated by thermal decomposition or
combustion.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers. Stop leak only if
you can do so without risk.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 103-49-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Yellow Liquid
Odor: Ammoniacal Odor
pH: Not available.
Vapor Pressure: <1 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 300 deg C @ 760.00mm Hg
Freezing/Melting Point: -26 deg C
Autoignition Temperature: Not available.
Flash Point: 143 deg C ( 289.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 1.0260g/cm3
Molecular Formula: C14H15N
Molecular Weight: 197.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, acid chlorides, acid anhydrides,
chloroformates.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 103-49-1 unlisted.
LD50/LC50:
Not available.
Oral, rat: LD50 = 50-500 mg/kg; Dermal, rabbit: LD50 =
Carcinogenicity:
Dibenzylamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 21 Harmful in contact with skin.
R 25 Toxic if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 103-49-1: 2
Canada
CAS# 103-49-1 is listed on Canada's DSL List.
CAS# 103-49-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 103-49-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/26/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Alpha, Alpha, Alpha-Trifluoro-P-Tolunitrile, 99% 455-18-5
Ethyl 4-methoxybenzoate, 98% 94-30-4
Ethanesulfonic Acid, 95% (Titr.) 594-45-6
3,6-Dihydroxybenzonorbornane, 96% (uv-vis) 15155-91-5
Ethyl 3-Aminobenzoate, 99+% 582-33-2
Chromium(III)acetylacetonate, 97% 21679-31-2
2-(2-(Methylamino)ethyl)pyridine dihydrochloride 5579-84-0
2-Amino-4-chlorobenzoic acid, 98% 89-77-0
N-(2-Hydroxyethyl)Pyrrolidine, 95% 2955-88-6
2,2,2-Trifluoroethyl P-Toluenesulfonate 98% 433-06-7
3,4-Diethoxybenzoic Acid, 99% 5409-31-4
1-Octadecanol 95% 112-92-5
DL-2,3-Diaminopropionic Acid Monohydrochloride, 99% 54897-59-5
5-Methyl-3-heptanone, 96% (gc) 541-85-5
1-Bromo-2,2-dimethoxypropane, 97% 126-38-5
Phenyl 4-Aminosalicylate, 99% 133-11-9
Tetraethyltin, 97% 597-64-8
1-Piperazinepropanol, 98% 5317-32-8
Diethyl Methylmalonate, 99% 609-08-5
2,2,6,6-Tetramethylcyclohexanone, 98% 1195-93-3
2-Nitroresorcinol 601-89-8
o-Methoxycinnamic acid, predominantly trans 6099-03-2
4-Aminobenzyl cyanide, 99% 3544-25-0
2,3-Dichloropyridine, 99% 2402-77-9
2-Amino-1-Phenylethanol, 98% 7568-93-6
Dipropylene Glycol, Tech., 99% (GC) Mixture of Isomeric Propylene 25265-71-8
Dibenzylamine, 98% 103-49-1
6-Chloro-2-picoline, 98% 18368-63-3
Diethyl Oxalacetate Sodium Salt (PRACT) 40876-98-0
Cyclobutanecarboxylic Acid, 98% 3721-95-7
2-(2-Ethoxyethoxy)ethyl Acetate, 99% 112-15-2
2-Mercapto-6-Nitrobenzothiazole, 96% (Titr.) 4845-58-3
Dihydrocytochalasin B 39156-67-7
3-Chloropropylamine Hydrochloride, 98% 6276-54-6
2-Amino-3-Methylbenzoic Acid, 98% 4389-45-1
m-Phenetidine, 96% (gc) 621-33-0
4,4-Diphenylsemicarbazide, 98% 603-51-0
3-Methyl-1-pentyn-3-ol, 99+% 77-75-8
(R)-(+)-N-Benzyl-alpha-methylbenzylamine, 98% 38235-77-7
1,7-Diaza-15-Crown-5, 99% 31249-95-3
l-(-)-Xylose, p.a. 609-06-3
4-Hydroxybenzylidenemalonodinitrile, 99% 3785-90-8
2,2'-Dithiodipyridine, 98% 2127-03-9
Mercury atomic absorption standard solution, 1 mg/ml Hg in 10% HNO3 7439-97-6
Lissamine Rhodamine B Sulfonyl Chloride, 99+% (UV-VIS) 62796-29-6
2,4-Diethyl-2,6-heptadienal, 97% Mixture of Isomers 85136-07-8
Dimethyldiselenide, 99+% 7101-31-7
2-Amino-4-Hydroxy-1H-Pteridine 2236-60-4
Alpha-Bromo-O-Tolunitrile, 98% 22115-41-9
(2-Chloroethyl)trimethylammonium chloride, 98% 999-81-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net