Search   
MSDS 
:
 2-Amino-1-Phenylethanol, 98%
CAS 
:
 7568-93-6
SYNONYMS 
:
 ??-(Aminomethyl)benzyl Alcohol; Phenylethanolamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7568-93-6 |2-Amino-1-Phenylethanol | 98 | 231-469-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Keep container
tightly closed. Do not ingest or inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7568-93-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Lumps
Color: slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 160 deg C @ 17.00mm Hg
Freezing/Melting Point: 56 - 60 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H11NO
Molecular Weight: 137.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7568-93-6: DN5500000
LD50/LC50:
Not available.
Carcinogenicity:
2-Amino-1-Phenylethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7568-93-6: No information available.
Canada
CAS# 7568-93-6 is listed on Canada's NDSL List.
CAS# 7568-93-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7568-93-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 5/27/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Alpha, Alpha, Alpha-Trifluoro-P-Tolunitrile, 99% 455-18-5
Ethyl 4-methoxybenzoate, 98% 94-30-4
Ethanesulfonic Acid, 95% (Titr.) 594-45-6
3,6-Dihydroxybenzonorbornane, 96% (uv-vis) 15155-91-5
Ethyl 3-Aminobenzoate, 99+% 582-33-2
Chromium(III)acetylacetonate, 97% 21679-31-2
2-(2-(Methylamino)ethyl)pyridine dihydrochloride 5579-84-0
2-Amino-4-chlorobenzoic acid, 98% 89-77-0
N-(2-Hydroxyethyl)Pyrrolidine, 95% 2955-88-6
2,2,2-Trifluoroethyl P-Toluenesulfonate 98% 433-06-7
3,4-Diethoxybenzoic Acid, 99% 5409-31-4
1-Octadecanol 95% 112-92-5
DL-2,3-Diaminopropionic Acid Monohydrochloride, 99% 54897-59-5
5-Methyl-3-heptanone, 96% (gc) 541-85-5
1-Bromo-2,2-dimethoxypropane, 97% 126-38-5
Phenyl 4-Aminosalicylate, 99% 133-11-9
Tetraethyltin, 97% 597-64-8
1-Piperazinepropanol, 98% 5317-32-8
Diethyl Methylmalonate, 99% 609-08-5
2,2,6,6-Tetramethylcyclohexanone, 98% 1195-93-3
2-Nitroresorcinol 601-89-8
o-Methoxycinnamic acid, predominantly trans 6099-03-2
4-Aminobenzyl cyanide, 99% 3544-25-0
2,3-Dichloropyridine, 99% 2402-77-9
2-Amino-1-Phenylethanol, 98% 7568-93-6
Dipropylene Glycol, Tech., 99% (GC) Mixture of Isomeric Propylene 25265-71-8
Dibenzylamine, 98% 103-49-1
6-Chloro-2-picoline, 98% 18368-63-3
Diethyl Oxalacetate Sodium Salt (PRACT) 40876-98-0
Cyclobutanecarboxylic Acid, 98% 3721-95-7
2-(2-Ethoxyethoxy)ethyl Acetate, 99% 112-15-2
2-Mercapto-6-Nitrobenzothiazole, 96% (Titr.) 4845-58-3
Dihydrocytochalasin B 39156-67-7
3-Chloropropylamine Hydrochloride, 98% 6276-54-6
2-Amino-3-Methylbenzoic Acid, 98% 4389-45-1
m-Phenetidine, 96% (gc) 621-33-0
4,4-Diphenylsemicarbazide, 98% 603-51-0
3-Methyl-1-pentyn-3-ol, 99+% 77-75-8
(R)-(+)-N-Benzyl-alpha-methylbenzylamine, 98% 38235-77-7
1,7-Diaza-15-Crown-5, 99% 31249-95-3
l-(-)-Xylose, p.a. 609-06-3
4-Hydroxybenzylidenemalonodinitrile, 99% 3785-90-8
2,2'-Dithiodipyridine, 98% 2127-03-9
Mercury atomic absorption standard solution, 1 mg/ml Hg in 10% HNO3 7439-97-6
Lissamine Rhodamine B Sulfonyl Chloride, 99+% (UV-VIS) 62796-29-6
2,4-Diethyl-2,6-heptadienal, 97% Mixture of Isomers 85136-07-8
Dimethyldiselenide, 99+% 7101-31-7
2-Amino-4-Hydroxy-1H-Pteridine 2236-60-4
Alpha-Bromo-O-Tolunitrile, 98% 22115-41-9
(2-Chloroethyl)trimethylammonium chloride, 98% 999-81-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net