Search   
MSDS 
:
 Diethyl sebacate, 98%
CAS 
:
 110-40-7
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-40-7 |Diethyl sebacate | 98% | 203-764-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-40-7:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: fruity odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 312 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 93 deg C (> 199.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9630g/cm3
Molecular Formula: C14H26O4
Molecular Weight: 258.35

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-40-7: VS1180000
LD50/LC50:
CAS# 110-40-7: Draize test, rabbit, skin: 500 mg/24H Mild; Oral,
rat: LD50 = 14470 mg/kg.
Carcinogenicity:
Diethyl sebacate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50: 2.73 mg/L; 96 Hr; Flow through

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 110-40-7: No information available.
Canada
CAS# 110-40-7 is listed on Canada's DSL List.
CAS# 110-40-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-40-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/11/1998 Revision #3 Date: 7/30/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl O-Mesitylsulfonylacetohydroxamate, 98% 38202-27-6
1,1-Methylene-di-2-naphthol, 98% 1096-84-0
2-Naphthyl benzoate, 98% 93-44-7
4-Fluorobenzyl triphenyl phosphoniumchloride, 98% 0-01-1
3,4-Methylenedioxyacetophenone, 98% 3162-29-6
Chloromethyl chlorosulfate, 98% 49715-04-0
2,4,5-Trihydroxypyrimidine, 97% 496-76-4
3-Nitro-1,2-phenylenediamine, 98% 3694-52-8
1-Fluoro-4-hydroxy-1,4-diazabicyclo[2.2.2]octane 162241-33-0
5-Bromo-4-chloro-3-indolyl-??-d-glucuronide monocyclohexylamine salt, 114162-64-0
Diethyl sebacate, 98% 110-40-7
Propyl Disulfide, 99% (GC) 629-19-6
Tetraethyl ethylenediphosphonate, 95% 995-32-4
9-Aminoacridine hydrochloride monohydrate, 98% 134-50-9
N-Benzoyl-D,L-methionine, 98% 4703-38-2
N-(p-Toluenesulfonyl)-DL-methionine, 98% 4703-33-7
5-Bromo-2-hydroxybenzyl alcohol, 98% 2316-64-5
2-Acetoxyacetophenone, 98% 7250-94-4
Diethyldithiocarbamic acid, 97% 147-84-2
4-Chloro-2-isopropyl-5-methylphenol, 98% 89-68-9
DL-6-Methoxy-alpha-methyl-2-napthalenemethanol, 98% 77301-42-9
4-Sulfonic calix[6]arene hydrate
Decanenitrile 1975-78-6
2-Cyanoethyl 2-naphthyl ketone 0-01-1
Betha, Betha-Dimethyl-Gamma-Methylene-Gamma-Butyrolactone, 99% 0-00-1
Bromocresol green, ozone friendly ready to use spray for TLC, solvent 67-63-0
Dimethylaminobenzaldehyde, ozone friendly ready to use spray for TLC 67-63-0
Ninhydrine, ozone friendly ready to use spray for TLC chromatography 67-63-0
Phosphomolybdic acid, ozone friendly ready to use spray for TLC 67-63-0
Rhodamine B, ozone friendly ready to use spray for TLC 67-63-0
Phenol/Chloroform/Isoamylalcohol, stabilized, water sat. sol., 67-66-3
Phenol/TRIS saturated sol., stabilized, DNase, RNase and Protease 77-86-1
Chloroform/Isoamyl alcohol, DNase, RNase and Protease free (24 parts 67-66-3
Citric acid trisodium salt hydrate, DNase RNase and Protease free 68-04-2
Ethylenediaminetetraacetic acid disodium salt, DNase, RNase and 139-33-3
Ethylenediaminetetraacetic acid tetrasodium salt, DNase, RNase and 64-02-8
Tris Borate EDTA buffer, 10x, DNase, RNase and Protease free, pH 8.3 77-86-1
Tris EDTA buffer, DNase, RNase and Protease free, ready to use, pH 77-86-1
Tris EDTA acetate buffer, 10x, DNase, RNase and Protease free, pH 8.3 77-86-1
HEPES free acid, DNase, Rnase and Protease free 7365-45-9
Citric acid, anhydrous, Rnase and Protease free 77-92-9
Acrylamide ultra sequencing gel, 4%, ready-to-use solution 57-13-6
Acrylamide ultra sequencing gel, 6%, ready-to-use solution 57-13-6
Acrylamide ultra sequencing gel, 8%, ready-to-use solution 57-13-6
Acrylamide / N,N'-Methylenebisacrylamide 19:1, 40% mix solution in 79-06-1
Acrylamide / N,N'-Methylenebisacrylamide 29:1, 40% mix solution in 79-06-1
Acrylamide / N,N'-Methylenebisacrylamide 37.5:1, 40% mix solution in 0-01-1
4-Butoxyacetanilide, 97% 23563-26-0
1-(??5-Bromopropoxy)-4-nitrobenzene, 97% 13094-50-3
4-Iodo-3-nitrotoluene, 97% 5326-39-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net