Search   
MSDS 
:
 Propyl Disulfide, 99% (GC)
CAS 
:
 629-19-6
SYNONYMS 
:
 Dipropyldisulfide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 629-19-6 |Propyl Disulfide | 99 | 211-079-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes.The toxicological properties of this material
have not been fully investigated.Lachrymator (substance which
increases the flow of tears).

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Combustible liquid. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 629-19-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: penetrating, sharp, oily odor
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 20 deg
Viscosity: Not available.
Boiling Point: 195 - 196 deg C @ 760.00mm Hg
Freezing/Melting Point: -86 deg C
Autoignition Temperature: Not available.
Flash Point: 66 deg C ( 150.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9600g/cm3
Molecular Formula: C6H14S2
Molecular Weight: 150.31

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 629-19-6: JO1955000
LD50/LC50:
Not available.
Carcinogenicity:
Propyl Disulfide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 39 Wear eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 629-19-6: No information available.
Canada
CAS# 629-19-6 is listed on Canada's DSL List.
CAS# 629-19-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 629-19-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/22/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl O-Mesitylsulfonylacetohydroxamate, 98% 38202-27-6
1,1-Methylene-di-2-naphthol, 98% 1096-84-0
2-Naphthyl benzoate, 98% 93-44-7
4-Fluorobenzyl triphenyl phosphoniumchloride, 98% 0-01-1
3,4-Methylenedioxyacetophenone, 98% 3162-29-6
Chloromethyl chlorosulfate, 98% 49715-04-0
2,4,5-Trihydroxypyrimidine, 97% 496-76-4
3-Nitro-1,2-phenylenediamine, 98% 3694-52-8
1-Fluoro-4-hydroxy-1,4-diazabicyclo[2.2.2]octane 162241-33-0
5-Bromo-4-chloro-3-indolyl-??-d-glucuronide monocyclohexylamine salt, 114162-64-0
Diethyl sebacate, 98% 110-40-7
Propyl Disulfide, 99% (GC) 629-19-6
Tetraethyl ethylenediphosphonate, 95% 995-32-4
9-Aminoacridine hydrochloride monohydrate, 98% 134-50-9
N-Benzoyl-D,L-methionine, 98% 4703-38-2
N-(p-Toluenesulfonyl)-DL-methionine, 98% 4703-33-7
5-Bromo-2-hydroxybenzyl alcohol, 98% 2316-64-5
2-Acetoxyacetophenone, 98% 7250-94-4
Diethyldithiocarbamic acid, 97% 147-84-2
4-Chloro-2-isopropyl-5-methylphenol, 98% 89-68-9
DL-6-Methoxy-alpha-methyl-2-napthalenemethanol, 98% 77301-42-9
4-Sulfonic calix[6]arene hydrate
Decanenitrile 1975-78-6
2-Cyanoethyl 2-naphthyl ketone 0-01-1
Betha, Betha-Dimethyl-Gamma-Methylene-Gamma-Butyrolactone, 99% 0-00-1
Bromocresol green, ozone friendly ready to use spray for TLC, solvent 67-63-0
Dimethylaminobenzaldehyde, ozone friendly ready to use spray for TLC 67-63-0
Ninhydrine, ozone friendly ready to use spray for TLC chromatography 67-63-0
Phosphomolybdic acid, ozone friendly ready to use spray for TLC 67-63-0
Rhodamine B, ozone friendly ready to use spray for TLC 67-63-0
Phenol/Chloroform/Isoamylalcohol, stabilized, water sat. sol., 67-66-3
Phenol/TRIS saturated sol., stabilized, DNase, RNase and Protease 77-86-1
Chloroform/Isoamyl alcohol, DNase, RNase and Protease free (24 parts 67-66-3
Citric acid trisodium salt hydrate, DNase RNase and Protease free 68-04-2
Ethylenediaminetetraacetic acid disodium salt, DNase, RNase and 139-33-3
Ethylenediaminetetraacetic acid tetrasodium salt, DNase, RNase and 64-02-8
Tris Borate EDTA buffer, 10x, DNase, RNase and Protease free, pH 8.3 77-86-1
Tris EDTA buffer, DNase, RNase and Protease free, ready to use, pH 77-86-1
Tris EDTA acetate buffer, 10x, DNase, RNase and Protease free, pH 8.3 77-86-1
HEPES free acid, DNase, Rnase and Protease free 7365-45-9
Citric acid, anhydrous, Rnase and Protease free 77-92-9
Acrylamide ultra sequencing gel, 4%, ready-to-use solution 57-13-6
Acrylamide ultra sequencing gel, 6%, ready-to-use solution 57-13-6
Acrylamide ultra sequencing gel, 8%, ready-to-use solution 57-13-6
Acrylamide / N,N'-Methylenebisacrylamide 19:1, 40% mix solution in 79-06-1
Acrylamide / N,N'-Methylenebisacrylamide 29:1, 40% mix solution in 79-06-1
Acrylamide / N,N'-Methylenebisacrylamide 37.5:1, 40% mix solution in 0-01-1
4-Butoxyacetanilide, 97% 23563-26-0
1-(??5-Bromopropoxy)-4-nitrobenzene, 97% 13094-50-3
4-Iodo-3-nitrotoluene, 97% 5326-39-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net