Search   
MSDS 
:
 N-Ethylethylenediamine, 98+%
CAS 
:
 110-72-5
SYNONYMS 
:
 2-Ethylaminoethylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-72-5 |N-ETHYLETHYLENEDIAMINE | >98 | 203-795-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Causes burns.Corrosive.Highly flammable.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Vapors may cause
dizziness or suffocation.
Chronic:
None

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting and seek IMMEDIATE MEDICAL ADVICE.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Will be easily ignited by heat,
sparks or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Do not get in eyes, on skin, or on
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use only in a chemical fume hood. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-72-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 128 - 130 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 10 deg C ( 50.00 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8370g/cm3
Molecular Formula: C4H12N2
Molecular Weight: 88.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-72-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-ETHYLETHYLENEDIAMINE -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.*
Hazard Class: 3 (8)
UN Number: 2733
Packing Group: II
IMO
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3.2 (8)
UN Number: 2733
Packing Group: II
RID/ADR
Shipping Name: AMINES, FLAMMABLE, CORROSIVE, N.O.S.
Hazard Class: 3
UN Number: 2733
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 34 Causes burns.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 110-72-5: 2
Canada
CAS# 110-72-5 is listed on Canada's NDSL List.
CAS# 110-72-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-72-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/22/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Anilinoethanol, 98% 122-98-5
2,4-Dimethylstyrene 2234-20-0
5-Sulfoisophthalic acid,monosodium salt 98% 6362-79-4
1,3-Dichloro-2-Butene, 96%, Mixture of Cis and Trans Isomers 926-57-8
3,4-Difluorobenzonitrile, 97% 64248-62-0
3-Aminopyrazole-4-Carboxylic Acid, 95% 24447-68-5
N-Methyl-p-phenylenediamine dihydrochloride, 98% (titr.) 5395-70-0
9,10-Bis(Phenylethynyl)Anthracene 10075-85-1
2-(2-Benzoxazolyl)malondialdehyde 40071-07-6
Bicyclohexyl 92-51-3
9-Octyl-9-heptadecanol, tech. 17687-72-8
1-Naphthyl isocyanate, 99% 86-84-0
3-Cyanophenol, 97% 873-62-1
Trimethylacetamide, 98% 754-10-9
4-Acetoxybiphenyl, 99+% 148-86-7
Allyl Acetate, 99% 591-87-7
Ethyl Thiocyanate, 99% (GC) 542-90-5
3,5-Dichlorobenzoic Acid, 99% 51-36-5
Ethyl 2-aminocyclopenta[b]thiophene-3-carboxylate, 99+% 4815-29-6
4-Carboxybenzaldehyde 97% 619-66-9
N-Methylacetamide, 99+% 79-16-3
5-Nitro-2-furanacrolein, tech, 92% 1874-22-2
(2R,3R)-3-Phenyl Glycidol, 96% (GC) 98819-68-2
2-Bromopyridine, 99% 109-04-6
Citronellyl Acetate, 97% 150-84-5
4-Penten-1-ol, 99% 821-09-0
Alpha, Alpha-Dicyclopropylbenzene-Methanol 5689-19-0
Osmium(III) chloride, 63.2% to 65.2% Os 13444-93-4
Tetramethylammonium Fluoride Trihydrate, 99% (Titr.) 373-68-2
Cytochrome c, horse heart muscle 90% warburg activity 9007-43-6
Octylamine, 99+% (GC) 111-86-4
2,3-Diaminonaphthalene, 97% 771-97-1
1-(4-Bromophenyl)-2-Pyrrolidinone 99+%(GC) 7661-32-7
4-Aminobutyric acid, 99+% 56-12-2
2'-Methylacetoacetanilide, 99% (HPLC) 93-68-5
4-Cyclohexyl-1-Butanol, 99% 4441-57-0
Pipes (1,4-Piperazinebis(Ethanesulfonic Acid)) 98.5+% 5625-37-6
5-Norbornene-2-acrylic acid, 99% 15222-64-7
4-Amino-2,6-Dimethylpyrimidine, 99% 461-98-3
N-Methyloctylamine, 95% (GC) 2439-54-5
Poly(2-ethylhexyl acrylate), 32% solids solution in Toluene, average 108-88-3
N-Ethylethylenediamine, 98+% 110-72-5
4,6-Dihydroxy-2-Mercaptopyrimidine, 98% 504-17-6
Poly T(R)-128 68550-83-4
Cyclopropylphenylmethane, 99% 1667-00-1
2-Methylindoline, 99+% 6872-06-6
4-Biphenylmethanol 98% 3597-91-9
2-Bromofluorene, 95% 1133-80-8
2-Norbornaneacetic Acid, 96% 1007-01-8
Poly(vinyl chloride), high molecular weight 9002-86-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net