Search   
MSDS 
:
 2-Anilinoethanol, 98%
CAS 
:
 122-98-5
SYNONYMS 
:
 N-Phenylethanolamine; PEA; Ethanol,2-(phenylamine); Phenyl     ethanolamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 122-98-5 |2-Anilinoethanol | 98 | 204-588-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 24 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic in contact with skin. Irritating to eyes.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes severe skin irritation. May be fatal if absorbed through the
skin.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do
not get in eyes, on skin, or on clothing. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 122-98-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear brown
Odor: None reported.
pH: Not available.
Vapor Pressure: 2 hPa @ 100 C
Viscosity: Not available.
Boiling Point: 268 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: 410 deg C ( 770.00 deg F)
Flash Point: 305 deg C ( 581.00 deg F)
Explosion Limits, lower: 1.00 vol %
Explosion Limits, upper: 6.80 vol %
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 1.0850g/cm3
Molecular Formula: C8H11NO
Molecular Weight: 137.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Acids - acid chlorides - acid anhydrides - oxidizing agents -
chloroformates.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 122-98-5: KJ7175000
LD50/LC50:
CAS# 122-98-5: Draize test, rabbit, eye: 20 mg Severe; Draize test,
rabbit, eye: 20 mg/24H Moderate; Oral, rat: LD50 = 2230 mg/kg; Skin,
rabbit: LD50 = 63 uL/kg.
Carcinogenicity:
2-Anilinoethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: II
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: II
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 24 Toxic in contact with skin.
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 122-98-5: 1
Canada
CAS# 122-98-5 is listed on Canada's DSL List.
CAS# 122-98-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 122-98-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/28/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Anilinoethanol, 98% 122-98-5
2,4-Dimethylstyrene 2234-20-0
5-Sulfoisophthalic acid,monosodium salt 98% 6362-79-4
1,3-Dichloro-2-Butene, 96%, Mixture of Cis and Trans Isomers 926-57-8
3,4-Difluorobenzonitrile, 97% 64248-62-0
3-Aminopyrazole-4-Carboxylic Acid, 95% 24447-68-5
N-Methyl-p-phenylenediamine dihydrochloride, 98% (titr.) 5395-70-0
9,10-Bis(Phenylethynyl)Anthracene 10075-85-1
2-(2-Benzoxazolyl)malondialdehyde 40071-07-6
Bicyclohexyl 92-51-3
9-Octyl-9-heptadecanol, tech. 17687-72-8
1-Naphthyl isocyanate, 99% 86-84-0
3-Cyanophenol, 97% 873-62-1
Trimethylacetamide, 98% 754-10-9
4-Acetoxybiphenyl, 99+% 148-86-7
Allyl Acetate, 99% 591-87-7
Ethyl Thiocyanate, 99% (GC) 542-90-5
3,5-Dichlorobenzoic Acid, 99% 51-36-5
Ethyl 2-aminocyclopenta[b]thiophene-3-carboxylate, 99+% 4815-29-6
4-Carboxybenzaldehyde 97% 619-66-9
N-Methylacetamide, 99+% 79-16-3
5-Nitro-2-furanacrolein, tech, 92% 1874-22-2
(2R,3R)-3-Phenyl Glycidol, 96% (GC) 98819-68-2
2-Bromopyridine, 99% 109-04-6
Citronellyl Acetate, 97% 150-84-5
4-Penten-1-ol, 99% 821-09-0
Alpha, Alpha-Dicyclopropylbenzene-Methanol 5689-19-0
Osmium(III) chloride, 63.2% to 65.2% Os 13444-93-4
Tetramethylammonium Fluoride Trihydrate, 99% (Titr.) 373-68-2
Cytochrome c, horse heart muscle 90% warburg activity 9007-43-6
Octylamine, 99+% (GC) 111-86-4
2,3-Diaminonaphthalene, 97% 771-97-1
1-(4-Bromophenyl)-2-Pyrrolidinone 99+%(GC) 7661-32-7
4-Aminobutyric acid, 99+% 56-12-2
2'-Methylacetoacetanilide, 99% (HPLC) 93-68-5
4-Cyclohexyl-1-Butanol, 99% 4441-57-0
Pipes (1,4-Piperazinebis(Ethanesulfonic Acid)) 98.5+% 5625-37-6
5-Norbornene-2-acrylic acid, 99% 15222-64-7
4-Amino-2,6-Dimethylpyrimidine, 99% 461-98-3
N-Methyloctylamine, 95% (GC) 2439-54-5
Poly(2-ethylhexyl acrylate), 32% solids solution in Toluene, average 108-88-3
N-Ethylethylenediamine, 98+% 110-72-5
4,6-Dihydroxy-2-Mercaptopyrimidine, 98% 504-17-6
Poly T(R)-128 68550-83-4
Cyclopropylphenylmethane, 99% 1667-00-1
2-Methylindoline, 99+% 6872-06-6
4-Biphenylmethanol 98% 3597-91-9
2-Bromofluorene, 95% 1133-80-8
2-Norbornaneacetic Acid, 96% 1007-01-8
Poly(vinyl chloride), high molecular weight 9002-86-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net