**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6362-79-4 |5-Sulfoisophthalic acid, monosodium sa| 98% | 228-845-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.The toxicological properties of this material have not
been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 6362-79-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 373 - 375 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: in water: 380 g/l
Specific Gravity/Density:
Molecular Formula: C8H5O7SNa
Molecular Weight: 268.16
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 6362-79-4: DB6030000
LD50/LC50:
CAS# 6362-79-4: Draize test, rabbit, eye: 20 mg/24H Moderate; Oral,
rat: LD50 = 6450 mg/kg.
Carcinogenicity:
5-Sulfoisophthalic acid, monosodium salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Water danger/protection WGK 1
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6362-79-4: 1
Canada
CAS# 6362-79-4 is listed on Canada's DSL List.
CAS# 6362-79-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6362-79-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Anilinoethanol, 98%
| 122-98-5 |
|
2,4-Dimethylstyrene
| 2234-20-0 |
|
5-Sulfoisophthalic acid,monosodium salt 98%
| 6362-79-4 |
|
1,3-Dichloro-2-Butene, 96%, Mixture of Cis and Trans Isomers
| 926-57-8 |
|
3,4-Difluorobenzonitrile, 97%
| 64248-62-0 |
|
3-Aminopyrazole-4-Carboxylic Acid, 95%
| 24447-68-5 |
|
N-Methyl-p-phenylenediamine dihydrochloride, 98% (titr.)
| 5395-70-0 |
|
9,10-Bis(Phenylethynyl)Anthracene
| 10075-85-1 |
|
2-(2-Benzoxazolyl)malondialdehyde
| 40071-07-6 |
|
Bicyclohexyl
| 92-51-3 |
|
9-Octyl-9-heptadecanol, tech.
| 17687-72-8 |
|
1-Naphthyl isocyanate, 99%
| 86-84-0 |
|
3-Cyanophenol, 97%
| 873-62-1 |
|
Trimethylacetamide, 98%
| 754-10-9 |
|
4-Acetoxybiphenyl, 99+%
| 148-86-7 |
|
Allyl Acetate, 99%
| 591-87-7 |
|
Ethyl Thiocyanate, 99% (GC)
| 542-90-5 |
|
3,5-Dichlorobenzoic Acid, 99%
| 51-36-5 |
|
Ethyl 2-aminocyclopenta[b]thiophene-3-carboxylate, 99+%
| 4815-29-6 |
|
4-Carboxybenzaldehyde 97%
| 619-66-9 |
|
N-Methylacetamide, 99+%
| 79-16-3 |
|
5-Nitro-2-furanacrolein, tech, 92%
| 1874-22-2 |
|
(2R,3R)-3-Phenyl Glycidol, 96% (GC)
| 98819-68-2 |
|
2-Bromopyridine, 99%
| 109-04-6 |
|
Citronellyl Acetate, 97%
| 150-84-5 |
|
4-Penten-1-ol, 99%
| 821-09-0 |
|
Alpha, Alpha-Dicyclopropylbenzene-Methanol
| 5689-19-0 |
|
Osmium(III) chloride, 63.2% to 65.2% Os
| 13444-93-4 |
|
Tetramethylammonium Fluoride Trihydrate, 99% (Titr.)
| 373-68-2 |
|
Cytochrome c, horse heart muscle 90% warburg activity
| 9007-43-6 |
|
Octylamine, 99+% (GC)
| 111-86-4 |
|
2,3-Diaminonaphthalene, 97%
| 771-97-1 |
|
1-(4-Bromophenyl)-2-Pyrrolidinone 99+%(GC)
| 7661-32-7 |
|
4-Aminobutyric acid, 99+%
| 56-12-2 |
|
2'-Methylacetoacetanilide, 99% (HPLC)
| 93-68-5 |
|
4-Cyclohexyl-1-Butanol, 99%
| 4441-57-0 |
|
Pipes (1,4-Piperazinebis(Ethanesulfonic Acid)) 98.5+%
| 5625-37-6 |
|
5-Norbornene-2-acrylic acid, 99%
| 15222-64-7 |
|
4-Amino-2,6-Dimethylpyrimidine, 99%
| 461-98-3 |
|
N-Methyloctylamine, 95% (GC)
| 2439-54-5 |
|
Poly(2-ethylhexyl acrylate), 32% solids solution in Toluene, average
| 108-88-3 |
|
N-Ethylethylenediamine, 98+%
| 110-72-5 |
|
4,6-Dihydroxy-2-Mercaptopyrimidine, 98%
| 504-17-6 |
|
Poly T(R)-128
| 68550-83-4 |
|
Cyclopropylphenylmethane, 99%
| 1667-00-1 |
|
2-Methylindoline, 99+%
| 6872-06-6 |
|
4-Biphenylmethanol 98%
| 3597-91-9 |
|
2-Bromofluorene, 95%
| 1133-80-8 |
|
2-Norbornaneacetic Acid, 96%
| 1007-01-8 |
|
Poly(vinyl chloride), high molecular weight
| 9002-86-2 |
|
|