Search   
MSDS 
:
 Diisopropanolamine, 99% (Titr.)
CAS 
:
 110-97-4
SYNONYMS 
:
 1,1'-Iminodi-2-Propanol.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-97-4 |DIISOPROPANOLAMINE | 99% | 203-820-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes.Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes mild skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Dust can be an explosion
hazard when exposed to heat or flame. Containers may explode when
heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 110-97-4:

Russia: 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light yellow cyrstalline lumps
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.02 mm Hg @42 deg C
Viscosity: 1.98 poise @45C
Boiling Point: 249 - 250 deg C @ 760.00mm Hg
Freezing/Melting Point: 33 deg C
Autoignition Temperature: 370 deg C ( 698.00 deg F)
Flash Point: 126 deg C ( 258.80 deg F)
Explosion Limits, lower: 1.10 vol %
Explosion Limits, upper: 5.40 vol %
Decomposition Temperature:
Solubility in water: 870 G/L (20C)
Specific Gravity/Density: .9900g/cm3
Molecular Formula: C6H15NO2
Molecular Weight: 133.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, exposure to
moist air or water.
Incompatibilities with Other Materials:
Moisture, strong acids, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-97-4: UB6600000
LD50/LC50:
CAS# 110-97-4: Draize test, rabbit, eye: 50 mg Severe; Oral, rat:
LD50 = 4765 mg/kg.
Carcinogenicity:
DIISOPROPANOLAMINE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
See Dictionary of Substances and Their Effects 1992.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 110-97-4: 1
Canada
CAS# 110-97-4 is listed on Canada's DSL List.
CAS# 110-97-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-97-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/30/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-Arabitol, 99+% 7643-75-6
7-Amino-1,3-Naphthalenedisulfonic Acid Monopotassium Salt (Techn) 842-15-9
4-Chloro-4'-Methoxybutyrophenone, 98% 40877-19-8
Lanthionine, 98% 922-55-4
Boc-On, 99% 58632-95-4
Diisopropanolamine, 99% (Titr.) 110-97-4
Tetrahydrothiopyran-4-one, 99% 1072-72-6
1-Ethyl-4-Piperidone, 98% 3612-18-8
1-Chloro-3-Hydroxypropane, 98% 627-30-5
1,1-Diphenylethanol 599-67-7
4-Aminoquinaldine, 98% 6628-04-2
1,1-Dichlorobutane, 95% (GC) 541-33-3
2-Chloro-4-fluoroaniline 2106-02-7
alpha-Dimethylamino-3',4'-dihydroxyaceto- phenone, hydrochloride 16899-83-5
2,2-Dimethoxypropane, 98% 77-76-9
2,2-Dimethyl-5-(2-Tetrahydropyrrolylidene) -1,3-Dioxane-4,6-Dione, 0-00-1
2-(4-Methoxyphenyl)-4,4-Bis(Methylthio)- 0-01-1
Hydrazine Monohydrochloride, 98+% 2644-70-4
Poly(acrylamide), carboxyl modified, high carboxyl content
Mordant yellow 12 6470-98-0
Bismuth Nitrate, 5-Hydrate, 98% 10035-06-0
Squalene, 99+% (GC) 111-02-4
O-Fluorocinnamic Acid, 98% 451-69-4
3-Cyanobenzoic Acid, 98% 1877-72-1
p-Toluenesulfonic acid, 12% in acetic acid 64-19-7
o-Anisidine, 99+% 90-04-0
(R)-(-)-2-Amino-1-Propanol 35320-23-1
3-Fluorobenzoyl chloride, 97% 1711-07-5
7-Methylquinoline (Pract) 612-60-2
Cis-1,2-Dihydro-3-Fluorocatechol, 95% 0-00-1
Trans-2-Hydroxy-1-Cyclohexyl-Amine Hydrochloride, 99% 5456-63-3
3-Bromo-1,1,1-trifluoroacetone 431-35-6
Titanium(IV)Ethoxide,33-35% TiO2 3087-36-3
n,n-Dimethylformamide dimethyl acetal, ca 97% (gc) 4637-24-5
Diisopropylcyanamide, 97+% 3085-76-5
2-Naphthylacetonitrile 7498-57-9
Methylaminoacetonitrile hydrochloride 98+% 25808-30-4
2,3-Dihydroxyquinoxaline, 99+% 15804-19-0
4,4'-Trimethylenedipiperidine, 97% 16898-52-5
3-Methyl-1-cyclohexene, 98% 591-48-0
4-Methylsulfonyl-3-nitrobenzoic acid, 99%
2,2,5-Trimethyl-1,3-Dioxane-4,6-Dione, 98% 3709-18-0
(p-methoxyphenyl)acetonitrile, 97% 104-47-2
1,9-Dichlorononane, 99% 821-99-8
Samarium(III) Sulfate Octahydrate, 99.999% 13465-58-2
Pyrrole-2-Carboxaldehyde, 99% 1003-29-8
1,4-Butanediol Diglycidyl Ether, Tech., 50-60% (GC) 2425-79-8
n-Pentyl-triphenylphosphoniumbromide, 99+% 21406-61-1
Trans-4-Hydroxystilbene, 98% 6554-98-9
Ethyl Phenylglyoxylate, 95% (GC) 1603-79-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net