Search   
MSDS 
:
 Squalene, 99+% (GC)
CAS 
:
 111-02-4
SYNONYMS 
:
 2,6,10,15,19,23-Hexamethyl-2,6,10,14,18,22-Tetracosahexaene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111-02-4 |Squalene | 99 | 203-826-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of
water. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
Water may be ineffective. Cool containers with flooding quantities
of water until well after fire is out. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation. Place under an inert
atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Handle under an inert atmosphere. Store
protected from air. Store and handle protected from air.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 111-02-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to faint colored
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 12 cP 25.00 deg C
Boiling Point: 285 deg C @ 25.00mmHg
Freezing/Melting Point: -75 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density: .8580g/cm3
Molecular Formula: C30H50
Molecular Weight: 410.71

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to air, strong oxidants.
Incompatibilities with Other Materials:
Air.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111-02-4: XB6010000
LD50/LC50:
CAS# 111-02-4: Oral, mouse: LD50 = 5 gm/kg.
Carcinogenicity:
Squalene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111-02-4: No information available.
Canada
CAS# 111-02-4 is listed on Canada's DSL List.
CAS# 111-02-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111-02-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/19/1998 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-Arabitol, 99+% 7643-75-6
7-Amino-1,3-Naphthalenedisulfonic Acid Monopotassium Salt (Techn) 842-15-9
4-Chloro-4'-Methoxybutyrophenone, 98% 40877-19-8
Lanthionine, 98% 922-55-4
Boc-On, 99% 58632-95-4
Diisopropanolamine, 99% (Titr.) 110-97-4
Tetrahydrothiopyran-4-one, 99% 1072-72-6
1-Ethyl-4-Piperidone, 98% 3612-18-8
1-Chloro-3-Hydroxypropane, 98% 627-30-5
1,1-Diphenylethanol 599-67-7
4-Aminoquinaldine, 98% 6628-04-2
1,1-Dichlorobutane, 95% (GC) 541-33-3
2-Chloro-4-fluoroaniline 2106-02-7
alpha-Dimethylamino-3',4'-dihydroxyaceto- phenone, hydrochloride 16899-83-5
2,2-Dimethoxypropane, 98% 77-76-9
2,2-Dimethyl-5-(2-Tetrahydropyrrolylidene) -1,3-Dioxane-4,6-Dione, 0-00-1
2-(4-Methoxyphenyl)-4,4-Bis(Methylthio)- 0-01-1
Hydrazine Monohydrochloride, 98+% 2644-70-4
Poly(acrylamide), carboxyl modified, high carboxyl content
Mordant yellow 12 6470-98-0
Bismuth Nitrate, 5-Hydrate, 98% 10035-06-0
Squalene, 99+% (GC) 111-02-4
O-Fluorocinnamic Acid, 98% 451-69-4
3-Cyanobenzoic Acid, 98% 1877-72-1
p-Toluenesulfonic acid, 12% in acetic acid 64-19-7
o-Anisidine, 99+% 90-04-0
(R)-(-)-2-Amino-1-Propanol 35320-23-1
3-Fluorobenzoyl chloride, 97% 1711-07-5
7-Methylquinoline (Pract) 612-60-2
Cis-1,2-Dihydro-3-Fluorocatechol, 95% 0-00-1
Trans-2-Hydroxy-1-Cyclohexyl-Amine Hydrochloride, 99% 5456-63-3
3-Bromo-1,1,1-trifluoroacetone 431-35-6
Titanium(IV)Ethoxide,33-35% TiO2 3087-36-3
n,n-Dimethylformamide dimethyl acetal, ca 97% (gc) 4637-24-5
Diisopropylcyanamide, 97+% 3085-76-5
2-Naphthylacetonitrile 7498-57-9
Methylaminoacetonitrile hydrochloride 98+% 25808-30-4
2,3-Dihydroxyquinoxaline, 99+% 15804-19-0
4,4'-Trimethylenedipiperidine, 97% 16898-52-5
3-Methyl-1-cyclohexene, 98% 591-48-0
4-Methylsulfonyl-3-nitrobenzoic acid, 99%
2,2,5-Trimethyl-1,3-Dioxane-4,6-Dione, 98% 3709-18-0
(p-methoxyphenyl)acetonitrile, 97% 104-47-2
1,9-Dichlorononane, 99% 821-99-8
Samarium(III) Sulfate Octahydrate, 99.999% 13465-58-2
Pyrrole-2-Carboxaldehyde, 99% 1003-29-8
1,4-Butanediol Diglycidyl Ether, Tech., 50-60% (GC) 2425-79-8
n-Pentyl-triphenylphosphoniumbromide, 99+% 21406-61-1
Trans-4-Hydroxystilbene, 98% 6554-98-9
Ethyl Phenylglyoxylate, 95% (GC) 1603-79-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net