Search   
MSDS 
:
 Boc-On, 99%
CAS 
:
 58632-95-4
SYNONYMS 
:
 2-(Tert-Butoxycarbonyloxyimino)-2-Phenylacetonitrile.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 58632-95-4 |Boc-On | 99% | 261-370-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause
gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 58632-95-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to pale yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 87.00 - 89.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: practically insoluble
Specific Gravity/Density:
Molecular Formula: C13H14N2O3
Molecular Weight: 246.27

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 58632-95-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Boc-On -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 58632-95-4: No information available.
Canada
CAS# 58632-95-4 is listed on Canada's NDSL List.
CAS# 58632-95-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 58632-95-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-(-)-Arabitol, 99+% 7643-75-6
7-Amino-1,3-Naphthalenedisulfonic Acid Monopotassium Salt (Techn) 842-15-9
4-Chloro-4'-Methoxybutyrophenone, 98% 40877-19-8
Lanthionine, 98% 922-55-4
Boc-On, 99% 58632-95-4
Diisopropanolamine, 99% (Titr.) 110-97-4
Tetrahydrothiopyran-4-one, 99% 1072-72-6
1-Ethyl-4-Piperidone, 98% 3612-18-8
1-Chloro-3-Hydroxypropane, 98% 627-30-5
1,1-Diphenylethanol 599-67-7
4-Aminoquinaldine, 98% 6628-04-2
1,1-Dichlorobutane, 95% (GC) 541-33-3
2-Chloro-4-fluoroaniline 2106-02-7
alpha-Dimethylamino-3',4'-dihydroxyaceto- phenone, hydrochloride 16899-83-5
2,2-Dimethoxypropane, 98% 77-76-9
2,2-Dimethyl-5-(2-Tetrahydropyrrolylidene) -1,3-Dioxane-4,6-Dione, 0-00-1
2-(4-Methoxyphenyl)-4,4-Bis(Methylthio)- 0-01-1
Hydrazine Monohydrochloride, 98+% 2644-70-4
Poly(acrylamide), carboxyl modified, high carboxyl content
Mordant yellow 12 6470-98-0
Bismuth Nitrate, 5-Hydrate, 98% 10035-06-0
Squalene, 99+% (GC) 111-02-4
O-Fluorocinnamic Acid, 98% 451-69-4
3-Cyanobenzoic Acid, 98% 1877-72-1
p-Toluenesulfonic acid, 12% in acetic acid 64-19-7
o-Anisidine, 99+% 90-04-0
(R)-(-)-2-Amino-1-Propanol 35320-23-1
3-Fluorobenzoyl chloride, 97% 1711-07-5
7-Methylquinoline (Pract) 612-60-2
Cis-1,2-Dihydro-3-Fluorocatechol, 95% 0-00-1
Trans-2-Hydroxy-1-Cyclohexyl-Amine Hydrochloride, 99% 5456-63-3
3-Bromo-1,1,1-trifluoroacetone 431-35-6
Titanium(IV)Ethoxide,33-35% TiO2 3087-36-3
n,n-Dimethylformamide dimethyl acetal, ca 97% (gc) 4637-24-5
Diisopropylcyanamide, 97+% 3085-76-5
2-Naphthylacetonitrile 7498-57-9
Methylaminoacetonitrile hydrochloride 98+% 25808-30-4
2,3-Dihydroxyquinoxaline, 99+% 15804-19-0
4,4'-Trimethylenedipiperidine, 97% 16898-52-5
3-Methyl-1-cyclohexene, 98% 591-48-0
4-Methylsulfonyl-3-nitrobenzoic acid, 99%
2,2,5-Trimethyl-1,3-Dioxane-4,6-Dione, 98% 3709-18-0
(p-methoxyphenyl)acetonitrile, 97% 104-47-2
1,9-Dichlorononane, 99% 821-99-8
Samarium(III) Sulfate Octahydrate, 99.999% 13465-58-2
Pyrrole-2-Carboxaldehyde, 99% 1003-29-8
1,4-Butanediol Diglycidyl Ether, Tech., 50-60% (GC) 2425-79-8
n-Pentyl-triphenylphosphoniumbromide, 99+% 21406-61-1
Trans-4-Hydroxystilbene, 98% 6554-98-9
Ethyl Phenylglyoxylate, 95% (GC) 1603-79-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net