**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 112-54-9 |Dodecyl aldehyde | 96 | 203-983-6 |
|----------------|--------------------------------------|----------|-----------|
| 25013-16-5 |Butylated hydroxyanisole | 0.1 | 246-563-8 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation. May cause irritation of the conjunctiva.
Skin:
May cause skin irritation. No skin absorption data found. Not
expected to cause an allergic skin reaction.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Liquid will float and may
reignite on the surface of water.
Extinguishing Media:
In case of fire, use carbon dioxide, dry chemical powder or
appropriate foam. Product will float on water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep refrigerated. (Store below 4C/39F.) Keep container closed
when not in use. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 112-54-9:
CAS# 25013-16-5:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: colorless
Odor: fatty odor - floral-like
pH: Not applicable.
Vapor Pressure: 0.0153 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 237-239 deg C
Freezing/Melting Point: 12 deg C
Autoignition Temperature: Not available.
Flash Point: 101 deg C ( 213.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 0.8310 g/cm3
Molecular Formula: C12H24O
Molecular Weight: 184.32
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat, prolonged exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong acids, strong
bases, amines, ammonia.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 112-54-9: JR1910000
CAS# 25013-16-5: SL1945000
LD50/LC50:
CAS# 112-54-9: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
rat: LD50 = 23 gm/kg.
CAS# 25013-16-5: Oral, mouse: LD50 = 1100 mg/kg; Oral, rabbit: LD50
= 2100 mg/kg; Oral, rat: LD50 = 2 gm/kg.
Carcinogenicity:
Dodecyl aldehyde -
Not listed by ACGIH, IARC, or NTP.
Butylated hydroxyanisole -
California: carcinogen, initial date 1/1/90
NTP: Suspect carcinogen
IARC: Group 2B carcinogen
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 112-54-9: No information available.
CAS# 25013-16-5: No information available.
Canada
CAS# 112-54-9 is listed on Canada's DSL List.
CAS# 25013-16-5 is listed on Canada's DSL List.
CAS# 112-54-9 is listed on Canada's Ingredient Disclosure List.
CAS# 25013-16-5 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-54-9 is listed on the TSCA inventory.
CAS# 25013-16-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
Text for R-phrases from Section 2
MSDS Creation Date: 4/20/1998 Revision #2 Date: 12/09/2002
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
l-Cysteic Acid Monohydrate, 99+%
| 23537-25-9 |
|
1-Hexanesulfonic acid sodium salt premixed concentrate
| |
|
N-Alpha-Carbobenzyloxy-L-Asparagine, 98%
| 2304-96-3 |
|
Ytterbium atomic absorption standard solution, 1 mg/ml yb in 2% hno3
| |
|
Bromotrichloromethane, 99%
| 75-62-7 |
|
Dicyclopentadiene, 95%, stabilized with 100-200 ppm
| 77-73-6 |
|
3-Amino-1-propanesulfonic acid, 95%
| 3687-18-1 |
|
Copper(ii) fluoride, anhydrous, 99+%
| 7789-19-7 |
|
2-Chloro-4-Fluorophenylacetic Acid
| 177985-32-9 |
|
Cyclopropyl Phenyl Sulfide
| 14633-54-6 |
|
BOC-L-Tyrosine, 99+%
| 3978-80-1 |
|
1,8-Octanediol, 99+%
| 629-41-4 |
|
3-Thiophenecarboxylic acid, 99%
| 88-13-1 |
|
1,2,3-Trimethylbenzene, Tech., 90%
| 526-73-8 |
|
Molybdenum(v) chloride, 98%
| 10241-05-1 |
|
2-Dimethylaminoethyl Acetate
| 1421-89-2 |
|
4-Benzyl-4-Hydroxypiperidine, 95+%(GC)
| 51135-96-7 |
|
8-Chloroquinoline, 99% (gc)
| 611-33-6 |
|
2-Ethyl-3,5(6)-dimethylpyrazine,99.5+%
| 27043-05-6 |
|
p-Ethoxybenzyl Alcohol, 98%
| 6214-44-4 |
|
2,3-Dichlorothiophene, 97%
| 17249-79-5 |
|
Tropolone, 98%
| 533-75-5 |
|
1,3-Difluorobenzene, 99+%
| 372-18-9 |
|
2-Methylundecanal, 95%
| 110-41-8 |
|
2-Ethyl-2-methyl-1,3-dioxolane, 99%
| 126-39-6 |
|
Bromoethane, 98%
| 74-96-4 |
|
1,3,5-Triphenylbenzene, 97%
| 612-71-5 |
|
1-Tetradecene, 92%
| 1120-36-1 |
|
9,10-Anthracenedicarboxaldehyde, 95% (UV-Vis)
| 7044-91-9 |
|
Lead cyclohexanebutyrate
| 62637-99-4 |
|
1-Butanethiol, 99+%
| 109-79-5 |
|
L-(+)-Homoarginine hydrochloride, 99+%
| 1483-01-8 |
|
3,4-(Methylenedioxy)-aniline, 97%
| 14268-66-7 |
|
(2-Chloroethyl)benzene, 99%
| 622-24-2 |
|
Poly(propylene), chlorinated
| 68442-33-1 |
|
Dodecyl aldehyde, 96%, stabilized with 0.1% BHA
| 112-54-9 |
|
N,N'-Diallyltartardiamide
| 58477-85-3 |
|
5,6,7,8-Tetrahydro-2-naphthol, 98%
| 1125-78-6 |
|
Cyclodecanone, 97%
| 1502-06-3 |
|
4-Amino-1-butanol, 98%
| 13325-10-5 |
|
4-Aminoveratrole, 98%
| 6315-89-5 |
|
2-Bromo-4-nitrotoluene, 98%
| 7745-93-9 |
|
Pulegone (Pract), 88% (GC)
| 89-82-7 |
|
Diethyl suberate, 98%
| 2050-23-9 |
|
beta-Bromostyrene, mixture of cis/trans isomers, 97%
| 103-64-0 |
|
Naphthenic acids (pract)
| 1338-24-5 |
|
S(+)-1,3-Butanediol, 98%
| 24621-61-2 |
|
5-Bromo-1,2,4-trimethylbenzene, 99%
| 5469-19-2 |
|
alpha-D(+)-Melibiose hydrate, 99+%
| 585-99-9 |
|
O-Tolualdehyde 98% (Stabilized with 0.1 % H.Q.)
| 529-20-4 |
|
|