Search   
MSDS 
:
 p-Ethoxybenzyl Alcohol, 98%
CAS 
:
 6214-44-4
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6214-44-4 |4-Ethoxybenzyl Alcohol | 98 | 228-283-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 6214-44-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 273 deg C @ 760.00mmHg
Freezing/Melting Point: 27 deg C
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H12O2
Molecular Weight: 152.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6214-44-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Ethoxybenzyl Alcohol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 6214-44-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6214-44-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6214-44-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/23/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
l-Cysteic Acid Monohydrate, 99+% 23537-25-9
1-Hexanesulfonic acid sodium salt premixed concentrate
N-Alpha-Carbobenzyloxy-L-Asparagine, 98% 2304-96-3
Ytterbium atomic absorption standard solution, 1 mg/ml yb in 2% hno3
Bromotrichloromethane, 99% 75-62-7
Dicyclopentadiene, 95%, stabilized with 100-200 ppm 77-73-6
3-Amino-1-propanesulfonic acid, 95% 3687-18-1
Copper(ii) fluoride, anhydrous, 99+% 7789-19-7
2-Chloro-4-Fluorophenylacetic Acid 177985-32-9
Cyclopropyl Phenyl Sulfide 14633-54-6
BOC-L-Tyrosine, 99+% 3978-80-1
1,8-Octanediol, 99+% 629-41-4
3-Thiophenecarboxylic acid, 99% 88-13-1
1,2,3-Trimethylbenzene, Tech., 90% 526-73-8
Molybdenum(v) chloride, 98% 10241-05-1
2-Dimethylaminoethyl Acetate 1421-89-2
4-Benzyl-4-Hydroxypiperidine, 95+%(GC) 51135-96-7
8-Chloroquinoline, 99% (gc) 611-33-6
2-Ethyl-3,5(6)-dimethylpyrazine,99.5+% 27043-05-6
p-Ethoxybenzyl Alcohol, 98% 6214-44-4
2,3-Dichlorothiophene, 97% 17249-79-5
Tropolone, 98% 533-75-5
1,3-Difluorobenzene, 99+% 372-18-9
2-Methylundecanal, 95% 110-41-8
2-Ethyl-2-methyl-1,3-dioxolane, 99% 126-39-6
Bromoethane, 98% 74-96-4
1,3,5-Triphenylbenzene, 97% 612-71-5
1-Tetradecene, 92% 1120-36-1
9,10-Anthracenedicarboxaldehyde, 95% (UV-Vis) 7044-91-9
Lead cyclohexanebutyrate 62637-99-4
1-Butanethiol, 99+% 109-79-5
L-(+)-Homoarginine hydrochloride, 99+% 1483-01-8
3,4-(Methylenedioxy)-aniline, 97% 14268-66-7
(2-Chloroethyl)benzene, 99% 622-24-2
Poly(propylene), chlorinated 68442-33-1
Dodecyl aldehyde, 96%, stabilized with 0.1% BHA 112-54-9
N,N'-Diallyltartardiamide 58477-85-3
5,6,7,8-Tetrahydro-2-naphthol, 98% 1125-78-6
Cyclodecanone, 97% 1502-06-3
4-Amino-1-butanol, 98% 13325-10-5
4-Aminoveratrole, 98% 6315-89-5
2-Bromo-4-nitrotoluene, 98% 7745-93-9
Pulegone (Pract), 88% (GC) 89-82-7
Diethyl suberate, 98% 2050-23-9
beta-Bromostyrene, mixture of cis/trans isomers, 97% 103-64-0
Naphthenic acids (pract) 1338-24-5
S(+)-1,3-Butanediol, 98% 24621-61-2
5-Bromo-1,2,4-trimethylbenzene, 99% 5469-19-2
alpha-D(+)-Melibiose hydrate, 99+% 585-99-9
O-Tolualdehyde 98% (Stabilized with 0.1 % H.Q.) 529-20-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net