Search   
MSDS 
:
 2-Ethyl-2-methyl-1,3-dioxolane, 99%
CAS 
:
 126-39-6
SYNONYMS 
:
 2-Butanone ethylene acetal; 1,3-Dioxolane, 2-ethyl-2-methyl-;     2-Butanone, cyclic ethylene acetal; 2-Methyl-2-ethyl-1,3-dioxolane;     Ethyleneacetic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 126-39-6 |2-Ethyl-2-methyl-1,3-dioxolane | 99 | 204-785-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.Moisture
sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT get water inside containers. Do NOT use straight
streams of water. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation. Do not get water inside
containers. A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Ground and bond containers when transferring
material. Use spark-proof tools and explosion proof equipment. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use with adequate ventilation. Do not allow contact with water. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Keep from contact
with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Flammables-area. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 126-39-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 116.0 - 117.0 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 12 deg C ( 53.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9380g/cm3
Molecular Formula: C6H12O2
Molecular Weight: 116.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 126-39-6: JH7700000
LD50/LC50:
CAS# 126-39-6: Draize test, rabbit, eye: 500 mg/24H Mild; Draize
test, rabbit, skin: 500 mg/24H Mild; Oral, rat: LD50 = 2830 uL/kg;
Skin, rabbit: LD50 = 10 mL/kg.
Carcinogenicity:
2-Ethyl-2-methyl-1,3-dioxolane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 126-39-6: No information available.
Canada
CAS# 126-39-6 is listed on Canada's DSL List.
CAS# 126-39-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 126-39-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
l-Cysteic Acid Monohydrate, 99+% 23537-25-9
1-Hexanesulfonic acid sodium salt premixed concentrate
N-Alpha-Carbobenzyloxy-L-Asparagine, 98% 2304-96-3
Ytterbium atomic absorption standard solution, 1 mg/ml yb in 2% hno3
Bromotrichloromethane, 99% 75-62-7
Dicyclopentadiene, 95%, stabilized with 100-200 ppm 77-73-6
3-Amino-1-propanesulfonic acid, 95% 3687-18-1
Copper(ii) fluoride, anhydrous, 99+% 7789-19-7
2-Chloro-4-Fluorophenylacetic Acid 177985-32-9
Cyclopropyl Phenyl Sulfide 14633-54-6
BOC-L-Tyrosine, 99+% 3978-80-1
1,8-Octanediol, 99+% 629-41-4
3-Thiophenecarboxylic acid, 99% 88-13-1
1,2,3-Trimethylbenzene, Tech., 90% 526-73-8
Molybdenum(v) chloride, 98% 10241-05-1
2-Dimethylaminoethyl Acetate 1421-89-2
4-Benzyl-4-Hydroxypiperidine, 95+%(GC) 51135-96-7
8-Chloroquinoline, 99% (gc) 611-33-6
2-Ethyl-3,5(6)-dimethylpyrazine,99.5+% 27043-05-6
p-Ethoxybenzyl Alcohol, 98% 6214-44-4
2,3-Dichlorothiophene, 97% 17249-79-5
Tropolone, 98% 533-75-5
1,3-Difluorobenzene, 99+% 372-18-9
2-Methylundecanal, 95% 110-41-8
2-Ethyl-2-methyl-1,3-dioxolane, 99% 126-39-6
Bromoethane, 98% 74-96-4
1,3,5-Triphenylbenzene, 97% 612-71-5
1-Tetradecene, 92% 1120-36-1
9,10-Anthracenedicarboxaldehyde, 95% (UV-Vis) 7044-91-9
Lead cyclohexanebutyrate 62637-99-4
1-Butanethiol, 99+% 109-79-5
L-(+)-Homoarginine hydrochloride, 99+% 1483-01-8
3,4-(Methylenedioxy)-aniline, 97% 14268-66-7
(2-Chloroethyl)benzene, 99% 622-24-2
Poly(propylene), chlorinated 68442-33-1
Dodecyl aldehyde, 96%, stabilized with 0.1% BHA 112-54-9
N,N'-Diallyltartardiamide 58477-85-3
5,6,7,8-Tetrahydro-2-naphthol, 98% 1125-78-6
Cyclodecanone, 97% 1502-06-3
4-Amino-1-butanol, 98% 13325-10-5
4-Aminoveratrole, 98% 6315-89-5
2-Bromo-4-nitrotoluene, 98% 7745-93-9
Pulegone (Pract), 88% (GC) 89-82-7
Diethyl suberate, 98% 2050-23-9
beta-Bromostyrene, mixture of cis/trans isomers, 97% 103-64-0
Naphthenic acids (pract) 1338-24-5
S(+)-1,3-Butanediol, 98% 24621-61-2
5-Bromo-1,2,4-trimethylbenzene, 99% 5469-19-2
alpha-D(+)-Melibiose hydrate, 99+% 585-99-9
O-Tolualdehyde 98% (Stabilized with 0.1 % H.Q.) 529-20-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net