Search   
MSDS 
:
 4-Amino-1-butanol, 98%
CAS 
:
 13325-10-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13325-10-5 |4-Amino-1-butanol | 98% | 236-364-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Contact with liquid is corrosive to the eyes and causes severe
burns.
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes gastrointestinal tract burns. May cause central
nervous system depression, characterized by excitement, followed by
headache, dizziness, drowsiness, and nausea. Advanced stages may
cause collapse, unconsciousness, coma and possible death due to
respiratory failure.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation. Use only in a chemical fume
hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use only under a
chemical fume hood.
Exposure Limits
CAS# 13325-10-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 206 deg C @ 760.00mm Hg
Freezing/Melting Point: 16 - 18 deg C
Autoignition Temperature: Not available.
Flash Point: 107 deg C ( 224.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible with water
Specific Gravity/Density: .9670g/cm3
Molecular Formula: C4H11NO
Molecular Weight: 89.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents; acids. Will absorb carbon dioxide from air.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13325-10-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Amino-1-butanol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13325-10-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13325-10-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13325-10-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
l-Cysteic Acid Monohydrate, 99+% 23537-25-9
1-Hexanesulfonic acid sodium salt premixed concentrate
N-Alpha-Carbobenzyloxy-L-Asparagine, 98% 2304-96-3
Ytterbium atomic absorption standard solution, 1 mg/ml yb in 2% hno3
Bromotrichloromethane, 99% 75-62-7
Dicyclopentadiene, 95%, stabilized with 100-200 ppm 77-73-6
3-Amino-1-propanesulfonic acid, 95% 3687-18-1
Copper(ii) fluoride, anhydrous, 99+% 7789-19-7
2-Chloro-4-Fluorophenylacetic Acid 177985-32-9
Cyclopropyl Phenyl Sulfide 14633-54-6
BOC-L-Tyrosine, 99+% 3978-80-1
1,8-Octanediol, 99+% 629-41-4
3-Thiophenecarboxylic acid, 99% 88-13-1
1,2,3-Trimethylbenzene, Tech., 90% 526-73-8
Molybdenum(v) chloride, 98% 10241-05-1
2-Dimethylaminoethyl Acetate 1421-89-2
4-Benzyl-4-Hydroxypiperidine, 95+%(GC) 51135-96-7
8-Chloroquinoline, 99% (gc) 611-33-6
2-Ethyl-3,5(6)-dimethylpyrazine,99.5+% 27043-05-6
p-Ethoxybenzyl Alcohol, 98% 6214-44-4
2,3-Dichlorothiophene, 97% 17249-79-5
Tropolone, 98% 533-75-5
1,3-Difluorobenzene, 99+% 372-18-9
2-Methylundecanal, 95% 110-41-8
2-Ethyl-2-methyl-1,3-dioxolane, 99% 126-39-6
Bromoethane, 98% 74-96-4
1,3,5-Triphenylbenzene, 97% 612-71-5
1-Tetradecene, 92% 1120-36-1
9,10-Anthracenedicarboxaldehyde, 95% (UV-Vis) 7044-91-9
Lead cyclohexanebutyrate 62637-99-4
1-Butanethiol, 99+% 109-79-5
L-(+)-Homoarginine hydrochloride, 99+% 1483-01-8
3,4-(Methylenedioxy)-aniline, 97% 14268-66-7
(2-Chloroethyl)benzene, 99% 622-24-2
Poly(propylene), chlorinated 68442-33-1
Dodecyl aldehyde, 96%, stabilized with 0.1% BHA 112-54-9
N,N'-Diallyltartardiamide 58477-85-3
5,6,7,8-Tetrahydro-2-naphthol, 98% 1125-78-6
Cyclodecanone, 97% 1502-06-3
4-Amino-1-butanol, 98% 13325-10-5
4-Aminoveratrole, 98% 6315-89-5
2-Bromo-4-nitrotoluene, 98% 7745-93-9
Pulegone (Pract), 88% (GC) 89-82-7
Diethyl suberate, 98% 2050-23-9
beta-Bromostyrene, mixture of cis/trans isomers, 97% 103-64-0
Naphthenic acids (pract) 1338-24-5
S(+)-1,3-Butanediol, 98% 24621-61-2
5-Bromo-1,2,4-trimethylbenzene, 99% 5469-19-2
alpha-D(+)-Melibiose hydrate, 99+% 585-99-9
O-Tolualdehyde 98% (Stabilized with 0.1 % H.Q.) 529-20-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net